Middle Atlantic STL Flat 90D. Elbow 700 - 711WH

Middle Atlantic 711WH Steel Flat 90-Degree Elbow Fitting

Overview

The Middle Atlantic 711WH is a white steel flat 90-degree elbow fitting designed for use with the 700-series raceway system. At 2.88 in. wide × 2.88 in. tall × 0.88 in. deep, the 711WH provides a clean, low-profile direction change — keeping cable runs flush to walls and surfaces at corners without bulky transitions. This is the fitting to reach for when a 700-series run meets a wall corner and you need a compliant, professional finish rather than a field-bent approximation. TAA compliance makes it a straightforward choice for government, federal, and publicly funded installations where domestic sourcing documentation is required.

Compatibility

Designed specifically for the Middle Atlantic 700-series flat raceway system. Pairs with 700-series straight sections, couplings, and end caps to form a complete cable management run. The white finish (WH suffix) matches white 700-series raceway components — verify your installed raceway color before ordering, as Middle Atlantic offers the same fitting in additional finishes for color-matched installations. Not intended for use with round or D-shaped raceway profiles outside the 700-series form factor.

Installation Notes

The 0.88 in. depth keeps the fitting nearly flush to the mounting surface, but verify wall-corner clearance before committing to a run layout — any obstruction within that depth behind the corner will require a standoff or alternate routing. Designed for tool-assisted snap or screw-mount attachment consistent with 700-series installation practice; follow the 700-series installation guide for fastener spacing and surface prep. White finish is factory-applied — field painting risks coverage inconsistency at snap joints.