Server Technology C2S36TE-YQME2999 Configurable Alt-Phase HDOT PDU

Overview

The C2S36TE-YQME2999 is a Smart Master PRO2 (36) rack power distribution unit from Server Technology, built around configurable alternating-phase High Density Outlet Technology (HDOT) outlets. It's rated for 208V 3-phase Wye service at 60A, with 6 branch circuit breakers dividing the load across the outlet bank. This is a data center and server room infrastructure product, not a plug-and-play consumer strip — it's sized and phased for cabinets running dense, mixed-load server and networking gear.

Key Features

• 208V 3PH Wye input: matches standard data center 3-phase distribution, letting you balance load across phases at the rack rather than running everything off a single leg.
• 60A rated capacity: sized for high-density cabinets where blade servers, switches, and storage arrays are stacked tightly and single-phase strips run out of headroom.
• 6 branch circuit breakers (6BR): segments the outlet bank into protected zones, so a fault or overload on one branch trips locally instead of dropping the whole rack.
• Configurable alt-phase HDOT outlets: alternating-phase outlet layout supports load balancing decisions at install time based on the actual equipment being racked, rather than a fixed factory phase assignment.
• 36-outlet Smart Master PRO2 platform: gives enough outlet count to consolidate multiple lower-capacity strips into one managed unit per cabinet.
• TAA Compliance: relevant when this PDU is being procured against contracts that require Trade Agreements Act-compliant sourcing.

Integration & Compatibility

As a 3PH Wye 60A unit, the C2S36TE-YQME2999 needs to be matched to existing rack PDU whip and receptacle infrastructure already provisioned for that voltage and amperage — confirm upstream panel capacity and receptacle type before ordering. Pair it with compatible rack-mounted recording infrastructure or server hardware in the same cabinet, and review your power planning guide when sizing branch circuits across a multi-rack deployment. If this configuration doesn't match your phase or amperage requirement, Server Technology's Smart Master PRO2 line is built around configurable options — check a variant with different amperage or breaker count in the same family before settling on a spec.

Frequently Asked Questions

Q: What voltage and phase does the C2S36TE-YQME2999 run on?

A: It's rated 208V, 3-phase Wye configuration.

Q: How many branch circuit breakers does the C2S36TE-YQME2999 have?

A: Six branch circuit breakers (6BR), segmenting the outlet bank for localized fault protection.

Q: What's the maximum amperage rating on the C2S36TE-YQME2999?

A: 60A.

Q: Is the C2S36TE-YQME2999 TAA compliant?

A: Yes, this unit is listed as TAA Compliance.

Q: Does the C2S36TE-YQME2999 (sometimes searched as C2S36TE YQME2999) use fixed or configurable phase outlets?

A: It uses configurable alternating-phase HDOT outlets, allowing phase assignment to be set based on the deployment's load-balancing needs.

Karl Wilson

The C2S36TE-YQME2999 crossed my bench as a spec question, not an install — a customer needed to confirm it would actually match their panel before committing budget. On paper it's a 208V 3-phase Wye unit rated to 60A with 6 branch breakers, which is the detail that actually matters here: get the phase and amperage wrong on a PDU order and you've got hardware that can't be terminated to your existing whip.

Technical Highlights:

• 208V 3PH Wye: matches standard 3-phase data center distribution rather than single-phase, so load balancing happens across three legs instead of one.
• 60A rating with 6BR: six branch breakers split that 60A capacity into protected zones instead of one big fused bank.
• Configurable alt-phase HDOT outlets: phase assignment on the outlet bank isn't fixed at the factory, so it can be set to match the actual load profile in the cabinet.

Deployment Considerations:

• Confirm your upstream panel and whip are already provisioned for 208V 3PH Wye at 60A before ordering — this isn't a unit you adapt to single-phase 120V service.
• The published specification here doesn't include outlet count or connector types, so verify those details against the exact configuration before finalizing a cabinet layout.

This is the right spec sheet to hand your electrical contractor when you're standardizing a row of high-density racks on 3-phase Wye service and need branch-level breaker protection rather than one shared circuit per cabinet.