Panduit FY9UP77X005F030 Single-Mode 24-Fiber QuickNet HD Flex Pre-Terminated Trunk Assembly
Overview
The Panduit FY9UP77X005F030 is a 30-foot (9.1 m) single-mode, 24-fiber pre-terminated trunk cable assembly from the Panduit QuickNet HD Flex product line. It is engineered for data centers, telecommunications rooms, entrance facilities, and equipment distribution areas where deploying a pre-terminated fiber infrastructure needs to happen fast and stay reliable. The plenum-rated jacket qualifies it for air-handling spaces without conduit, and the 24-fiber single-mode strand count makes it a practical choice for backbone runs between high-density patch zones or between equipment distribution areas and main cross-connects.
Pre-terminated trunks like this one eliminate the field-termination step entirely — no fusion splicer, no epoxy, no polish — so a two-person team can build out a structured cabling backbone in hours rather than days. The QuickNet HD Flex platform is Panduit's high-density modular architecture designed to scale incrementally: you add modules and trunks as zones grow without re-pulling cable plants.
Key Features
- Single-Mode Fiber, 24-Strand Count: SM glass supports long-haul runs at data center scale with minimal signal loss — suitable for campus backbones and inter-building links where multimode's distance ceiling is a constraint. 24 fibers in a single trunk means 12 duplex circuits per pull, consolidating what would otherwise require multiple smaller assemblies.
- 30-Foot (9.1 m) Factory-Terminated Length: The FY9UP77X005F030's 30 ft length is purpose-built for within-room or inter-rack backbone segments in mid-size data halls or telecom closets. Factory termination means every connection is assembled and tested under controlled conditions — field-terminated connectors introduce variability that factory ends avoid.
- Plenum-Rated Jacket: Plenum (CMP) rating satisfies NEC requirements for cables routed through air-handling spaces without conduit. For raised-floor data centers or above-ceiling pathways in commercial buildings, this removes the conduit-or-reclassify decision entirely — deploy directly in the plenum without a variance.
- QuickNet HD Flex Sub-Brand Platform: The QuickNet HD Flex platform uses a modular cassette and trunk architecture that allows incremental expansion. New zones connect by adding modules and trunks — no re-termination of existing runs. This matters in phased build-outs where you're not committing full fiber counts on day one.
- Pre-Terminated, Plug-and-Play Deployment: Factory-terminated assemblies arrive tested and ready to route. Eliminating field termination cuts labor hours, removes a source of installation error, and compresses project schedules — relevant when you're coordinating cabling with rack delivery and equipment commissioning on a tight timeline.
- Designed for High-Density Environments: Data centers, telecom rooms, entrance facilities, and equipment distribution areas each present different density and management challenges. The FY9UP77X005F030 is specified across all four application types, making it a consistent infrastructure element across the full structured cabling hierarchy — from the building entrance to the equipment rack.
Integration & Compatibility
The FY9UP77X005F030 integrates with Panduit QuickNet HD Flex modular housings and cassettes as part of a pre-terminated fiber backbone system. Single-mode fiber is compatible with SM-capable optical transceivers, including SFP/SFP+/QSFP variants used in enterprise core switches, storage area network directors, and data center interconnect equipment. The plenum jacket is compatible with NEC-compliant air-handling space routing across commercial, enterprise, and carrier-class facilities.
When planning your fiber pathway, verify that the rack-to-rack or zone-to-zone distance is at or below 30 ft before specifying this assembly — longer factory trunk lengths are available in the QuickNet HD Flex family for runs that exceed this span. Over-length trunks create management problems; under-length assemblies require coupling, which adds insertion loss. Size the trunk to the measured pathway, not the nominal rack spacing.
Frequently Asked Questions
Q: What fiber type does the FY9UP77X005F030 use — single-mode or multimode?
A: The FY9UP77X005F030 is a single-mode (SM) fiber assembly. Single-mode is appropriate for longer backbone distances and high-bandwidth applications where multimode's distance limitations would require optical amplification or re-termination at intermediate points.
Q: How many fibers are in the FY9UP77X005F030 trunk?
A: The assembly contains 24 fibers, which provides 12 duplex circuits in a single trunk pull. This is well-suited for backbone segments feeding high-density patch zones or equipment distribution areas where multiple duplex circuits are needed simultaneously.
Q: Is the FY9UP77X005F030 jacket rated for plenum (air-handling) spaces?
A: Yes. The FY9UP77X005F030 carries a plenum-rated jacket, satisfying NEC requirements for cables installed in air-handling spaces without conduit. This makes it appropriate for raised-floor data centers and above-ceiling pathways in commercial buildings.
Q: What is the exact length of the FY9UP77X005F030?
A: The assembly measures 30 feet (9.1 meters). This length is intended for within-room or inter-rack backbone runs in data centers, telecom rooms, and equipment distribution areas. Verify your measured pathway distance before ordering — over-length trunks complicate cable management and under-length assemblies require coupling adapters.
Q: What platform does the FY9UP77X005F030 belong to, and can it expand incrementally?
A: The FY9UP77X005F030 is part of Panduit's QuickNet HD Flex platform, a modular pre-terminated fiber system designed for incremental expansion. Additional zones are brought online by adding cassette modules and trunk assemblies — no re-termination of existing runs is required.
Q: Where is the FY9UP77X005F030 applicable?
A: Panduit specifies this assembly for data centers, telecommunications rooms, entrance facilities, and equipment distribution areas — covering the full structured cabling hierarchy from building entry to equipment rack.
The FY9UP77X005F030 is a 30-foot single-mode 24-fiber plenum trunk from Panduit's QuickNet HD Flex line — and the spec that matters most on a project like this isn't the fiber count, it's the plenum jacket. On a raised-floor data center build or a telecom room with open-ceiling pathways, a CMP-rated assembly lets you route directly in the air-handling space without stopping to pull conduit or reclassify the space. That one spec eliminates a common field-delay that has nothing to do with the cable itself.
Technical Highlights:
- 24-Fiber Single-Mode, 30 ft: At 9.1 meters, the FY9UP77X005F030 lands in the practical range for inter-rack backbone and zone-to-zone segments inside a single data hall or telecom room. 24 SM fibers gives you 12 duplex circuits per pull — enough to serve a full equipment bay without a second trunk assembly.
- Factory Pre-Termination: Every end is assembled and tested at the factory. You're not trusting a field tech's polish quality or splice alignment at 2am during a cutover — the connectors arrive ready to mate and the insertion loss is already characterized.
- QuickNet HD Flex Platform Architecture: The modular cassette-and-trunk design means you're not locked into today's fiber count. Phased build-outs add modules and trunks as zones come online — the existing trunk plant stays undisturbed.
Deployment Considerations:
- Measure the actual cable pathway — not the straight-line rack spacing — before specifying a 30 ft length. Overhead ladder rack, J-hooks, and horizontal manager bends can add 20–30% to the apparent distance, and a trunk that comes up short forces a coupling adapter that adds insertion loss to every circuit in the bundle.
- Single-mode requires SM-capable transceivers at both ends. Confirm your switch or SAN director ports are SM-compatible before committing to this assembly — swapping SM for OM4 after the trunk plant is installed is an expensive correction.
The FY9UP77X005F030 is the right call for a phased enterprise data center build where the cabling team needs to complete backbone segments during a tight maintenance window and the pathway crosses an air-handling plenum — factory ends, plenum jacket, and a 30 ft span that fits a standard within-room backbone without excess slack management.
