Panduit FR9TP77Y001F023 12-Fiber Singlemode Plenum Interconnect Cable 23ft

Overview

The Panduit FR9TP77Y001F023 is a 12-fiber singlemode plenum-rated interconnect cable cut to 23 feet — a pre-terminated assembly built for structured cabling runs inside air-handling spaces where fire code mandates low-smoke, zero-halogen-class materials. If you're pulling fiber through a plenum ceiling to connect patch panels, fiber distribution units, or active equipment in a data center or enterprise LAN backbone, this is the type of assembly that eliminates field termination labor and the quality variability that comes with it. Browse the full Panduit structured cabling catalog for companion panels, enclosures, and trunks.

Pre-terminated 12-fiber singlemode assemblies like the FR9TP77Y001F023 are a common choice for horizontal and backbone runs in commercial buildings where installers need consistent insertion loss without investing in a polishing station or fusion splicer on-site. The 23-foot length suits inter-rack runs, MDA-to-HDA connections, or short backbone segments between adjacent IDF closets.

Key Features

• Singlemode Fiber (12-count): Singlemode supports transmission distances far beyond multimode — measured in kilometers rather than hundreds of meters — making this the right choice when you need headroom for future distance requirements or are connecting equipment that requires OS1/OS2 transceivers. Twelve fibers in a single assembly give you six duplex channels, enough for a full 40G or 100G breakout scenario or parallel single-channel links without pulling multiple cables.
• Plenum (CMP) Cable Rating: The plenum rating satisfies NEC Article 800 requirements for installation in air-return ceilings and raised-floor HVAC plenums without conduit. Non-plenum (riser or OFNR) cable cannot legally substitute here — using the wrong rating in a plenum space is a code violation that can surface during inspections or insurance claims. Specifying FR9TP77Y001F023 on plenum jobs closes that gap from the start.
• Pre-Terminated Interconnect Assembly: Factory termination means each end is polished and tested at the point of manufacture, not in the field. This removes the risk of improper ferrule geometry or contaminated endfaces — two of the most common sources of elevated insertion loss on field-terminated fiber. You receive a cable that is ready to plug in, not one that requires additional test-and-polish steps before installation.
• 23-Foot Fixed Length: At 23 feet, this assembly targets specific inter-rack or cross-connect distances common in structured cabling layouts — long enough to route with slack management but short enough to avoid excessive coiling that can stress fibers or clutter cable trays. If your run is significantly shorter or longer, Panduit offers this family in other lengths; verify the run with a tape measure before ordering to avoid returns.
• Panduit Commercial-Grade Construction: Panduit fiber assemblies are manufactured to TIA-568 performance standards and are designed for integration with Panduit's fiber enclosures, patch panels, and outlet modules — though the connectors are industry-standard and will mate with any compliant adapter in your plant. Sourced factory-new, genuine Panduit.

Integration & Compatibility

The FR9TP77Y001F023 integrates into any TIA-568-compliant singlemode fiber infrastructure. It is compatible with Panduit's FiberRunner cable management systems, fiber patch panels, and fiber distribution units. Standard singlemode connector interfaces mean it mates with transceivers and active equipment from any major networking vendor. Verify the connector type (LC, SC, MPO, or other) against your equipment's port interface before ordering — the MPN encodes the connector and polish type, so confirm the last characters match your plant standard. Pair this cable with fiber optic patch panels and enclosures from the structured cabling category for a complete end-to-end channel. For runs that exceed 23 feet or require higher fiber counts, review the broader network infrastructure catalog for trunk and breakout options. If your project also requires copper patch panels or cable pathway management, both are available alongside Panduit fiber assemblies.

Frequently Asked Questions

Q: Is the Panduit FR9TP77Y001F023 rated for installation in plenum ceiling spaces?

A: Yes. The FR9TP77Y001F023 carries a plenum (CMP) cable rating, which satisfies NEC requirements for installation in air-handling plenum spaces without the need for conduit.

Q: What fiber type does the FR9TP77Y001F023 use — singlemode or multimode?

A: Singlemode. This assembly is built for long-distance or high-bandwidth applications where singlemode transceivers (OS1/OS2) are specified. It is not interchangeable with multimode (OM3/OM4) fiber infrastructure.

Q: How many duplex channels does a 12-fiber assembly provide?

A: A 12-fiber count gives you six duplex channels — enough for six independent singlemode links or configurations such as 40G SR4 breakout across four pairs.

Q: Can the FR9TP77Y001F023 be used with non-Panduit patch panels and enclosures?

A: Yes, provided your enclosures and adapters use the same connector type. The connectors on Panduit pre-terminated assemblies are industry-standard; verify the connector style (LC, SC, MPO, etc.) matches your plant standard before ordering.

Q: Is 23 feet the only available length for this Panduit fiber assembly?

A: No. The FR9TP77Y001F023 MPN designates this specific 23-foot cut. Panduit manufactures this family in multiple lengths; contact your infrastructure specialist to identify the correct MPN for a different run distance.