APC by Schneider Electric Single Sliding Door Black - NSAC2402

APC by Schneider Electric NSAC2402 Single Sliding Door, Black

Overview

The NSAC2402 is a single sliding door replacement and expansion component for APC by Schneider Electric enclosure systems, finished in black. At 2520 mm in height and 213.8 kg, this is a full-height structural door panel — not a rack accessory — designed for large-format network enclosures and infrastructure cabinets where a sliding rather than swing-open door configuration is required. If your row or aisle layout constrains front-access swing clearance, a sliding door eliminates that constraint without reducing the enclosure footprint.

Because the NSAC2402 ships as a single unit at 187.40 kg packaged weight in a 252 cm × 110.9 cm × 52 cm carton, receiving logistics and lift equipment planning are non-negotiable before delivery. This is not a two-person carry — coordinate a dock with appropriate material handling before scheduling shipment.

Key Features

• 2520 mm Panel Height: Matches full-height cabinet runs in data center and infrastructure rows, so the door aligns flush with adjacent enclosures without gap or trim work.
• Single Sliding Configuration: Eliminates swing-arc clearance requirements in front-access aisles — relevant in high-density rows where 90° door swing would block adjacent cabinet access or aisle paths.
• Black Finish: Consistent with standard APC NetShelter and Netsafe enclosure aesthetics; integrates without visible mismatches in mixed-rack environments.
• 213.8 kg Structural Weight: Reflects the heavy-gauge construction typical of physical security enclosures — the door itself is a load-bearing panel, not a thin sheet cover.

Integration & Compatibility

The NSAC2402 is designed for use within the APC by Schneider Electric enclosure ecosystem. Verify your enclosure model number and frame dimensions against APC's cabinet compatibility documentation before ordering — at this weight and size, a mis-matched door is not a minor return. Buyers integrating into existing data center cabinet rows should confirm rail spacing, hinge/slide mechanism compatibility, and floor-load ratings at the installation site. For projects pairing enclosures with power distribution or cooling infrastructure, confirm that the door's sliding path does not conflict with PDU cable egress or blanking panel arrangements on the adjacent face.

Frequently Asked Questions

Q: What enclosure models is the NSAC2402 compatible with?

A: Compatibility depends on your specific APC enclosure frame model and dimensions. Consult APC's enclosure compatibility documentation and verify against your cabinet's rail spacing and hinge mechanism before ordering.

Q: What is the weight of the NSAC2402?

A: The door weighs 213.8 kg. The packaged shipping weight is 187.40 kg in a 252 cm × 110.9 cm × 52 cm carton.

Q: Does the NSAC2402 require special tools or lift equipment for installation?

A: At 213.8 kg, appropriate material handling equipment is required. This is not a hand-carry installation — plan for dock access and mechanical lift support at the delivery site.

Q: What finish does the NSAC2402 come in?

A: The NSAC2402 is finished in black, consistent with standard APC enclosure cabinet aesthetics.

James Everett

The NSAC2402 is one of those components that tends to get ordered too late in a data center buildout — site teams lock in the enclosure rows and only realize post-install that the aisle clearance for swing-open doors was never accounted for. At 2520 mm tall and 213.8 kg, this sliding door is a structural commitment, not a quick swap.

Technical Highlights:

• 2520 mm Height: Full-height panel that spans the entire cabinet run — no partial-height gap that would require trim or filler panels in a finished row.
• 213.8 kg Construction Weight: Heavy-gauge build consistent with physical security and infrastructure enclosures; not decorative — this door is load-bearing and structurally integral to the cabinet.
• Sliding Door Mechanism: Eliminates the 90°+ swing arc that a standard hinged door requires — the direct practical benefit in constrained aisle configurations where adjacent cabinet access or hot/cold aisle separation panels would be blocked by a swinging door.

Deployment Considerations:

• At 187.40 kg packaged in a 252 cm carton, standard parcel delivery is not applicable — this ships freight, and the receiving dock must have appropriate lift equipment staged before the truck arrives.
• Confirm your specific enclosure model's sliding door compatibility before procurement; at this size and weight, a mis-matched order is a significant return logistics problem, not a minor inconvenience.

The NSAC2402 is the right specification for high-density data center rows or secure infrastructure rooms where aisle width is fixed and swing clearance is not available — particularly in retrofits where the cabinet row is already populated and adding clearance space is not an option.