Viking Electronics E-60-WH-EWP Satin White Entry Phone with EWP

Overview

The Viking Electronics E-60-WH-EWP is a telephone-line-powered, vandal-resistant entry phone engineered for demanding access-point deployments where you need hands-free two-way voice communication without running a separate power circuit. Rated IP66, operable from -30°F to 150°F, and built on an 18-gauge 304 stainless steel faceplate, this unit handles outdoor vestibule doors, loading docks, parking structures, and other high-abuse environments that would destroy consumer-grade hardware in a season. The satin white finish with a compact double-gang form factor makes it a clean fit for commercial building entry points alongside door entry systems and access control hardware. If you've been searching for the E-60-WH-EWP (also searched as E 60 WH EWP), this is the double-gang white variant with Enhanced Weather Protection.

Key Features

• Telephone Line Powered — No Dedicated Power Run: The E-60-WH-EWP draws power entirely from the telephone line, requiring a minimum of 18V DC talk battery and 20mA loop current. In legacy POTS or on-premise PBX environments, you wire it exactly like a desk phone — one pair, no transformer, no conduit for power. That's a real cost and labor savings on retrofit installs where pulling a second circuit is prohibitive.
• IP66 Ingress Protection: IP66 means sustained high-pressure water jets and total dust exclusion won't compromise the enclosure. This is the right rating for covered outdoor entries — building overhangs, parking garage gates, vestibule exteriors. If the installation point sees standing water or submersion risk, you'd need IP67 or higher; for everything short of that, IP66 is the correct specification here.
• Operating Range: -30°F to 150°F with Up to 100% Humidity: Very few entry phones are rated below 0°F. The -30°F floor means this unit stays functional in unheated northern-climate stairwells, walk-in freezer anterooms, and outdoor kiosks where competing products seize up in winter. The full 100% humidity tolerance means condensation from temperature swings won't degrade the electronics over time.
• 18-Gauge 304 Stainless Steel Faceplate: The 18-gauge faceplate resists both impact deformation and corrosion. 304 stainless is the standard for commercial architectural hardware — it won't rust in coastal or high-humidity environments the way mild steel powder-coat does. Faceplate dimensions are 4.875