Panduit CUSRRFS08W1 Net-Contain Roof Panel 800mm White
Overview
The Panduit CUSRRFS08W1 is the fixed roof panel designed for Panduit's Panduit Net-Contain universal single-row aisle containment enclosures in the 800mm width configuration. If you're closing out a hot-aisle or cold-aisle containment row and need a white-finish panel to match a white containment system, this is the specific part to order — not a universal fit, but an exact match for the 800mm single-row Net-Contain system it was engineered for.
The CUSRRFS08W1 ships as a single panel (package quantity of 1), sized at 966mm wide by 27mm tall (38 inches by 1.1 inches), providing a flush, low-profile roof closure that seals the top of the containment lane without adding meaningful height to the enclosure stack.
Key Features
- Steel and Polycarbonate Construction: The dual-material build gives you rigidity from the steel substrate where structural integrity matters, and visibility or light transmission from the polycarbonate sections — useful if technicians need to visually confirm airflow or equipment status through the roof panel without opening the containment lane.
- 966mm (38 in) Panel Width: Sized precisely for the 800mm Net-Contain enclosure frame. Attempting to fit this into a 600mm or 1200mm row will result in a dimensional mismatch — verify your enclosure width before ordering. The 800mm designation refers to the enclosure's nominal aisle-spanning width, not the panel's physical measurement.
- 27mm (1.1 in) Profile Height: The panel's minimal vertical profile keeps cumulative enclosure height growth negligible, which matters in facilities with strict ceiling clearance or fire-suppression drop zones above the containment system.
- White (Weiß) Finish: Matches white Net-Contain deployments. If your enclosure row is finished in black, this is the wrong panel — source the black variant instead to maintain consistent airflow seal geometry and finish cohesion.
- RoHS-Compliant Materials: Satisfies RoHS requirements for restricted hazardous substances, relevant for EU deployments and for enterprise procurement policies that require RoHS compliance across all data center hardware — including passive structural components, not just active electronics.
- Net-Contain Sub-Brand Lineage: The Net-Contain thermal management system is Panduit's dedicated aisle containment platform. Roof panels like the CUSRRFS08W1 are engineered to integrate with Net-Contain mounting rails and end-of-row doors — mixing panels from generic enclosure vendors will compromise the seal and undermine the containment efficiency the system was designed to deliver.
- Single-Piece Package: Ships as an individual panel. If you're outfitting an extended containment row requiring multiple roof segments, calculate your panel count based on the row's total length and order accordingly — there is no multi-pack configuration for this SKU.
Integration and Compatibility
The CUSRRFS08W1 is designed as a component of Panduit's universal single-row Net-Contain enclosure system at the 800mm width. It pairs with Net-Contain vertical posts, end-of-row doors, and side panels to form a complete hot-aisle or cold-aisle containment solution. Before ordering, confirm three things: (1) your enclosure row is the 800mm Net-Contain configuration, not the 600mm or 1200mm variant; (2) your facility's finish standard calls for white panels — mismatched finishes in a containment lane are not purely cosmetic, as panel interchangeability depends on dimensional precision; (3) you are sourcing from the aisle containment family and not mixing Net-Contain components with third-party containment hardware, which may differ in rail interface geometry.
This panel is passive — no power, no cabling, no firmware. Installation is mechanical only, following Panduit's Net-Contain assembly sequence for roof sections.
Frequently Asked Questions
Q: What enclosure width is the CUSRRFS08W1 designed for?
A: The CUSRRFS08W1 is designed specifically for Panduit's Net-Contain universal single-row aisle containment enclosure in the 800mm width configuration. It is not compatible with 600mm or 1200mm Net-Contain rows.
Q: What are the physical dimensions of the CUSRRFS08W1 roof panel?
A: The panel measures 966mm (38 inches) wide and 27mm (1.1 inches) tall. The overall length is 32.28 inches. It is a low-profile panel intended to provide a flush roof closure on the Net-Contain enclosure.
Q: What materials is the CUSRRFS08W1 constructed from?
A: The panel is constructed from a combination of steel and polycarbonate, providing structural rigidity along with some transparency or light transmission through the polycarbonate sections.
Q: Is the CUSRRFS08W1 RoHS-compliant?
A: Yes, the CUSRRFS08W1 meets RoHS (Restriction of Hazardous Substances) requirements, making it suitable for EU deployments and enterprise procurement policies requiring RoHS-compliant data center hardware.
Q: How many panels are included per order of the CUSRRFS08W1?
A: The CUSRRFS08W1 ships as a single panel (package quantity of 1). If your containment row requires multiple roof panels, order the appropriate quantity based on your row's total length.
Q: Is the CUSRRFS08W1 available in black?
A: The CUSRRFS08W1 is the white (Weiß) variant. If your Net-Contain deployment uses a black finish, you will need to source the corresponding black roof panel variant for the 800mm configuration.
The CUSRRFS08W1 is straightforward in scope but precision-dependent in practice — it's a 966mm-wide, 27mm-tall fixed roof panel for the Panduit Net-Contain 800mm single-row containment system. The reason I flag this to buyers is that the panel count calculation is often where projects go sideways: teams order by row count rather than row linear footage, end up short, and delay commissioning a containment project over a single missing roof segment. Order this with an accurate panel count from the start.
Technical Highlights:
- Steel/Polycarbonate Build: The steel backbone maintains panel rigidity across the 966mm span without sag or flex, while polycarbonate sections allow visual inspection of the containment lane without breaking the seal — useful during early commissioning when you're validating airflow paths before the row is fully loaded.
- 27mm Profile: At just over an inch of height, this panel adds essentially no vertical footprint to the enclosure. In facilities where ceiling clearance or fire suppression system drop zones sit close to the top of the containment row, that minimal profile matters more than it might seem.
- RoHS Compliance: Satisfies RoHS requirements on the structural panel itself — relevant for EU facilities and enterprise procurement teams that apply RoHS compliance mandates to all data center components, not just active electronics.
Deployment Considerations:
- Confirm your Net-Contain row is the 800mm width configuration before ordering — the CUSRRFS08W1 will not fit a 600mm or 1200mm row, and Net-Contain dimensional tolerances are tight enough that forcing a mismatch risks compromising the containment seal.
- This is the white-finish variant only. If any segment of your containment row is a black-finish system, you'll need to source the corresponding black panel — mixing finishes isn't purely an aesthetic issue if the dimensional interface differs between color variants.
The CUSRRFS08W1 is the right order for a data center or colocation facility commissioning or extending a white Net-Contain 800mm single-row aisle containment lane, where roof panel geometry and RoHS compliance are non-negotiable.
