Middle Atlantic RLNK-210-IEC-NS - Power Distribution Unit - Compact - 100 - 240VAC - C13 - 10A

Middle Atlantic RLNK-210-IEC-NS Compact 2-Outlet IEC Rack Power Distribution Unit

The Middle Atlantic RLNK-210-IEC-NS is a compact, 2-outlet IEC rack power distribution unit rated at 10A across a universal 100–240VAC input range — purpose-built for tight rack installations where you need clean, reliable AC distribution without the footprint of a full-width strip. At 4.65 inches wide and 1.74 inches tall, it fits horizontal half-rack slots and specialty mounting positions that standard 19-inch strips simply won't reach. If you're populating a compact surveillance rack, a desktop rack enclosure, or a side-car AV shelf, this is the PDU to reach for.

Key Features

• Universal 100–240VAC Input, C14 Plug: The C14 inlet accepts input from 100V Japanese infrastructure all the way to 240V European circuits — deploy this unit internationally without rewiring or buying region-specific hardware. The IEC cable type makes field-swapping cords straightforward when voltage requirements change on site.
• 2× IEC C13 Outlets, 10A Single Circuit: Both outlets share a single 10A circuit, which keeps load accounting simple: total draw across both devices must stay under 10A. For surveillance equipment — NVRs, small switches, or encoders — that's typically well within range. Two outlets is the right count when you need redundancy on a single device pair or when rack space is genuinely at a premium.
• Compact Form Factor (4.65″ W × 1.74″ H × 6.5″ D): At under 5 inches wide, the RLNK-210-IEC-NS occupies none of your precious 19-inch rack units. Mount it in the dead space of a compact enclosure or on an accessory rail — it doesn't compete with your NVR or switch for panel space. The 6.5-inch depth keeps it inside most shallow rack enclosures without rear-door conflicts.
• 2 ft IEC Cord: The short 2-foot cord is intentional for contained rack environments. It routes cleanly inside an enclosure without the cable management headache of a 6-foot strip stuffed into a 4U space. If your power source is further away, plan for a C14-to-NEMA or C14-to-C20 extension — the C14 inlet makes this straightforward.
• Powder Coat Finish: The powder coat finish holds up to the mild abrasion of repeated rack servicing — pulls, cable dress, neighbor equipment contact — without flaking or oxidizing the way bare steel does over time. Functional detail for anything that lives in a working equipment rack.
• ETL Listed: ETL listing (equivalent to UL) confirms the unit meets North American safety standards for electrical distribution equipment. This matters for enterprise deployments where facilities management or insurance requires listed equipment in any permanent installation.
• No Surge Protection — by Design: The RLNK-210-IEC-NS carries no surge suppression. That's not a gap — it's intentional for installations where upstream UPS or whole-rack surge protection already exists. Adding redundant surge stages can introduce series impedance or create ground loops; keeping this unit passive keeps it clean and transparent in the power chain.

Integration & Compatibility

The RLNK-210-IEC-NS is part of the Middle Atlantic power distribution line, designed to complement compact rack enclosures and AV/security infrastructure builds. The C14 inlet is universally compatible with IEC C13/C14 power chains, making it straightforward to integrate downstream of a UPS or power conditioner that provides the upstream protection this unit intentionally omits. It pairs naturally with compact network video recorders and edge switches where outlet count is low but international compatibility or enclosure fit is the governing constraint. For installations requiring more outlets or remote switching, Middle Atlantic's broader RackLink lineup offers higher outlet counts and intelligent monitoring — consider stepping up within the same family if your load or management requirements grow. Consult a power distribution unit selection guide if you're balancing outlet count, amperage, and form factor across multiple rack positions.

Frequently Asked Questions

Q: What plug type does the RLNK-210-IEC-NS use, and what does that mean for installation?

A: The RLNK-210-IEC-NS uses a C14 inlet plug. This is a standard IEC connector that mates with C13 outlets on most UPS units, PDU outputs, and power conditioners. It gives you flexibility to swap cords for different regional voltages since the unit accepts 100–240VAC input.

Q: Can the RLNK-210-IEC-NS be used internationally?

A: Yes. The unit is rated for 100–240VAC input and is listed as available internationally. The C14 IEC plug type supports cord swaps for different regional outlet configurations.

Q: Does the RLNK-210-IEC-NS include surge protection?

A: No. The surge protection type is listed as none. This unit is a passive distribution strip — plan for upstream surge protection via a UPS or dedicated surge suppressor if your installation requires it.

Q: How many outlets does the RLNK-210-IEC-NS have, and what is the amperage per outlet?

A: The RLNK-210-IEC-NS provides 2 IEC C13 outlets on a single 10A circuit. Total load across both outlets must not exceed 10A.

Q: Will the RLNK-210-IEC-NS fit inside a compact rack enclosure?

A: At 4.65 inches wide, 1.74 inches tall, and 6.5 inches deep, it is specifically designed for compact rack mounting — fits in half-rack and accessory mounting positions without consuming standard 1U rack unit space.

Q: Is the RLNK-210-IEC-NS ETL listed?

A: Yes. The RLNK-210-IEC-NS carries ETL listing, which is recognized as equivalent to UL listing for North American electrical safety compliance.

Marty Allison

The RLNK-210-IEC-NS fills a specific gap in compact rack builds that full-width PDUs can't address: you need IEC C13 outlets, international voltage compatibility, and a footprint small enough to mount off the main rack panel. At 4.65 inches wide and 1.74 inches tall with a C14 inlet, this unit drops into spots where a standard 1U strip would either block adjacent equipment or simply not fit. I reach for it in half-rack surveillance enclosures and compact AV/security builds where outlet count is secondary to placement flexibility.

Technical Highlights:

• C14 Inlet / 100–240VAC: Universal voltage range means the same unit ships to a US datacenter or an international branch office site — no region-specific SKU inventory needed. The C14 plug lets you swap the supply cord without touching the PDU itself.
• Single 10A Circuit, 2× C13 Outlets: Simple load math — if your two connected devices draw under 10A combined, you're covered. For a compact NVR plus a PoE switch or encoder, that's rarely a constraint, but verify draw before commissioning.
• 4.65″ × 1.74″ × 6.5″ Compact Body: The narrow width is the spec that matters most here. Most rack accessories are 19-inch or half-rack (roughly 9.5 inches) — at 4.65 inches, this unit mounts on side-car rails and accessory brackets that nothing else fits.

Deployment Considerations:

• No surge protection is included — this is intentional for installations with upstream UPS coverage, but a common oversight when deploying standalone without a UPS. Confirm your power chain before signing off on the install.
• The 2-foot cord is short by design, but it limits how far from the power source you can position the unit inside an enclosure. Measure the distance to your C14 source before mounting — a cord extension is straightforward but adds a connection point.

Best fit: compact surveillance or AV rack builds — particularly international deployments or multi-region equipment standardization programs — where a small IEC outlet count and universal voltage input matter more than outlet quantity or remote monitoring.