ATEN KN1000A 1-Port VGA KVM Over IP Switch with PDU Control

Overview

The KN1000A is a single-port KVM over IP switch from ATEN's ATEN KVM and control line that gives you full remote keyboard, video, and mouse access over a standard network connection. Designed for IT administrators and network infrastructure teams managing remote servers or appliances in rack environments, it handles video up to 1920 x 1200 @ 60 Hz with DDC2B support — enough resolution to work comfortably in any server BIOS or OS console session. The unit accepts both USB and PS/2 keyboard and mouse connections, so it integrates with legacy servers as well as modern hardware without requiring adapter dongles. A 10/100/1000 Mbps Ethernet port (with link status indicated via orange/green LED) handles the IP transport layer. Integrated PDU control — managed through PowerMonitor software for both Windows and Linux — lets you remotely cycle power on connected equipment, which matters on a truly headless deployment where a hung server can't be reached physically. If you're building a KVM over IP solution for a remote datacenter or server closet, the KN1000A addresses the core requirement: BIOS-level access and power management from anywhere on the network.

Compatibility

The KN1000A connects to any server or appliance with a standard VGA video output and USB or PS/2 keyboard/mouse ports. PowerMonitor PDU software runs on Windows (v1.0.081) and Linux (v1.1), supporting remote power management on compatible ATEN PDU hardware. The unit operates on universal AC input (100–240 V~, 50–60 Hz), making it suitable for both North American and international rack deployments. Firmware is field-upgradeable — current release is v1.0.070. For PDU and power distribution pairing, verify your PDU model is supported by ATEN's PowerMonitor application before deployment.

Installation Notes

The KN1000A is designed for rack mounting in a standard 1U form factor. DC power is supplied via a dedicated DC jack — confirm your rack power infrastructure provides the correct DC feed before installation. Operating humidity is rated 0–80% RH, non-condensing; avoid installations in high-moisture environments without supplemental environmental controls. The semi-recessed reset pushbutton prevents accidental resets in dense rack configurations. Note that ATEN's physical dimensions for rack products follow an L×W×H format rather than the conventional W×D×H — account for this when planning rack depth and cable management.