Comnet V08-4210-16-32T4-S19 Enterprise 2U Rackmount Recording Server
Overview
The Comnet V08-4210-16-32T4-S19 is a 2U rackmount enterprise recording server designed for large-scale surveillance deployments where raw storage capacity and processor headroom are non-negotiable. This system ships preconfigured with 32TB of enterprise-grade HDDs across 8 hot-plug bays and scales to support multi-site video management infrastructure. The dual Intel Xeon Scalable processors deliver the throughput needed for simultaneous multi-camera ingest, transcoding, and analytics tasks without bottlenecking your network or storage fabric.
Key Features
- 8 Hot-Plug Drive Bays with 32TB Enterprise HDD: Pre-populated with 4TB enterprise-class drives per bay — no bare hardware surprises. Hot-plug design means you can swap failed drives during business hours without downtime. Enterprise HDDs tolerate the 24/7 duty cycle that consumer drives cannot, extending replacement intervals and reducing total cost of ownership on large-scale systems.
- Dual Intel Xeon Scalable Processors: Up to two processor sockets give you the CPU resources to run video encoding, transcoding, and rule-based analytics alongside primary recording streams. This is the difference between a storage appliance and an edge compute node — plan for analytics at install time, not as an afterthought.
- Flexible RAID Configuration (0, 1, 5, 6, 10): Not a single-purpose RAID controller. RAID 5 or 6 delivers fault tolerance with acceptable overhead for 24/7 recording; RAID 1 mirrors critical metadata; RAID 10 is available for maximum throughput scenarios. Choose based on your RPO (recovery point objective) and performance requirements, not a vendor default.
- 2GB RAID Cache: Accelerates write performance during peak multi-camera ingest periods. With 8 drive bays running 24/7, sufficient cache prevents write stalls when sudden motion bursts (parking lot incidents, loading dock activity) spike across multiple cameras simultaneously.
- Dual Hot-Plug 750W Power Supplies: Redundant PSU design means a failed power supply does not trigger an emergency shutdown. Critical for unattended data centers and remote warehouse locations where power events are common. Each supply independently rated for full system load — no derating tricks.
- 2U Form Factor: Fits standard server racks, integrates with your existing rack infrastructure, cable routing, and power distribution. Vertical density is eight times higher than a consumer NAS in the same footprint, meaningful when provisioning large-scale multi-site monitoring.
Integration & Compatibility
The V08-4210-16-32T4-S19 is a bare recording server — it integrates with standard VMS platforms via ONVIF, RTSP, or vendor-specific APIs. Confirm your VMS (Milestone XProtect, Genetec, Axis Companion Pro, or equivalent) supports the expected camera stream count and encoding profiles before commissioning. Dual Xeon architecture allows for edge transcoding to reduce bandwidth on multi-site WAN links, but that capability is software-dependent — verify your VMS of choice supports hardware-accelerated encoding on this platform.
What's in the Box
The source evidence does not specify detailed packaging contents. Contact pre-sales engineering for confirmation of included cables, mounting hardware, and documentation.
Frequently Asked Questions
Q: Does the V08-4210-16-32T4-S19 support RAID expansion or migration?
A: The system supports RAID 0, 1, 5, 6, and 10 configurations. Drive capacity can be increased by replacing existing 4TB drives with larger capacity enterprise HDDs, but RAID migration processes vary by controller firmware. Consult the system documentation or pre-sales engineering before planning a capacity upgrade on an active system.
Q: What is the warranty on the V08-4210-16-32T4-S19?
A: Warranty details are not specified in the available product documentation. Contact the manufacturer or reseller directly for warranty terms, coverage scope, and support options.
Q: Can the V08-4210-16-32T4-S19 be used for archive or cold storage as well as live recording?
A: Yes. The dual Xeon processors and flexible RAID configuration support tiered storage strategies — live recording on RAID 5 or 6 with automated migration of older footage to RAID 1 or RAID 0 partitions for archive retention. Implementation depends on your VMS platform's storage management features.
Q: What are the power and cooling requirements for the V08-4210-16-32T4-S19?
A: The system includes dual hot-plug 750W power supplies, each rated for full load. Cooling requirements are not detailed in the available specifications. Consult the system datasheet or technical support for rack PDU and cooling capacity planning.
Q: Is the V08-4210-16-32T4-S19 NDAA Section 889 compliant?
A: NDAA compliance is not confirmed in the available product information. If NDAA compliance is a requirement for your deployment, contact the manufacturer to verify processor, component sourcing, and firmware certification.
Q: How many simultaneous camera streams can the V08-4210-16-32T4-S19 handle?
A: Stream capacity depends on resolution, frame rate, codec (H.265 vs. H.264), and processor load. The dual Xeon configuration is designed for large deployments (typically 64+ cameras), but exact throughput specifications require consultation with pre-sales engineering based on your camera models and encoding settings.
The Comnet V08-4210-16-32T4-S19 (often referenced as V08 4210 16 32T4 S19) is built for integrators who need to move beyond consumer-grade NAS appliances into actual enterprise recording infrastructure. The dual Xeon Scalable processors are the distinguishing feature here — they're not just for storage, they're a signal that this platform can handle real-world edge workloads beyond passive recording.
Technical Highlights:
- 8 Hot-Plug Enterprise HDD Bays with 32TB Preconfigured: Enterprise-class 4TB drives in each bay tolerate continuous 24/7 rotation far better than consumer equivalents. Hot-swappable design means you don't have to power down the system for drive replacement — critical in unattended warehouse or multi-site deployments where downtime cascades into missed footage.
- Dual Intel Xeon Scalable Processors: This is not an embedded ARM SoC. Dual Xeons give you CPU headroom for simultaneous recording, transcoding to lower bitrates for remote viewing, and rule-based video analytics processing. Many VMS platforms support hardware-accelerated video encoding on x86 platforms — leverage it to reduce bandwidth on multi-site WAN links.
- Redundant 750W Power Supplies with Hot-Plug Design: Each PSU independently rated for full system load. If one fails, the system stays online. In warehouse and industrial facilities where power events are frequent, this redundancy prevents emergency shutdowns and recovery overhead.
- Flexible RAID (0, 1, 5, 6, 10) with 2GB Cache: RAID 5 or 6 for fault tolerance with reasonable overhead; RAID 1 for synchronous metadata; RAID 10 for maximum write throughput during burst ingest. The 2GB cache absorbs write spikes when motion events trigger simultaneous encoding across dozens of camera streams.
Deployment Considerations:
- This is a bare recording server, not a turnkey VMS appliance. Confirm your chosen VMS platform (Milestone, Genetec, Axis, Hanwha) supports the camera models and encoding profiles you plan to deploy — there's no built-in compatibility guarantee.
- Stream capacity and encoding efficiency depend heavily on software configuration. H.265 vs. H.264, frame rate per camera, resolution, and analytics processing all impact processor utilization. Don't assume the Xeon processors mean "unlimited throughput" — sizing still requires pre-sales engineering input based on your specific camera roster.
The V08-4210-16-32T4-S19 is the right foundation for large-scale retail, warehouse, or critical infrastructure sites where you're managing 50+ cameras, need tiered storage (live + archive), and want the CPU resources for edge analytics or regional transcoding without adding external compute nodes.
