Panduit T45BIW8 Pan-Way T-45 Surface Raceway Base, 2.38 In. × 8 Ft., Off-White PVC
Overview
The Panduit T45BIW8 is the base component of the Pan-Way T-45 multichannel surface raceway system — a 2.38-inch-wide, 8-foot PVC channel designed to route low-voltage, fiber optic, and power cabling along perimeter walls in commercial and light-industrial environments. At 0.73 inches in profile height, the T-45 base sits flat against the wall without projecting far into the room, which matters in finished lobbies, classrooms, and healthcare corridors where aesthetics and clearance both count. Pre-punched mounting holes are built into the base, so you mark, drill, and fasten without having to measure and punch your own — a real time-saver on long runs. The off-white (blanc cassé) finish blends into standard commercial wall paint and accepts field painting if your installation has a specific color spec.
The T45BIW8 ships in packs of 8 pieces (64 linear feet per pack), with a carton quantity of 160 pieces (1,280 linear feet per carton) — a pack structure suited to both spot repairs and large-scale cable infrastructure buildouts. Pricing and stocking decisions should account for the minimum order quantity of 20 pieces.
Key Features
- 2.38 In. (60.4 mm) channel width: Wide enough to accommodate multiple cable runs — low-voltage data drops, fiber home-run cables, and a separate power circuit — without forcing cables to stack tightly against each other, which reduces heat buildup and simplifies future moves and adds.
- 8 ft. (2.4 m) section length: Longer sections mean fewer end-to-end joints on a run, which matters both for aesthetics and for reducing the number of splice/coupler fittings you need to stock. For a 40-foot wall run, you need only five sections.
- 0.73 in. (18.5 mm) profile height: Low-profile design keeps the raceway unobtrusive in finished spaces. This dimension also determines your maximum cable bundle diameter — plan your fill ratio accordingly before committing to the T-45 versus a deeper channel.
- Pre-punched mounting holes: Factory-punched holes in the base eliminate a field fabrication step on every section, keeping installation consistent and reducing installer time on repetitive runs in large spaces like open-plan offices or school corridors.
- PVC construction: Rigid PVC is lightweight, does not corrode, and does not require grounding the way metallic raceways do for low-voltage-only runs. It also accepts standard PVC adhesives for supplemental bonding on smooth masonry or drywall where screw-only attachment is impractical.
- UL Listed, CSA Certified, CE Marked, RoHS Compliant: All four marks in a single product means the T45BIW8 satisfies North American electrical code inspections (UL/CSA), ships into EU projects without additional certification work (CE), and meets hazardous-substance restrictions for public and healthcare facilities (RoHS) — no substitutions needed when project specs call out compliance.
- Pairs with T-70 cover: The base is designed for use with Panduit's T-70 cover, sold separately. Buying the base and cover as separate SKUs lets you order only the base quantity you need for phased installation, adding covers once cabling is dressed and tested.
- Off-white (blanc cassé) finish: A neutral tone that blends with standard commercial wall finishes. For custom color requirements, the PVC surface accepts standard latex paint without adhesion primers in most cases.
Compatibility and Integration
The T45BIW8 is part of Panduit's Pan-Way surface raceway line and is confirmed compatible with the T-70 cover. The T-45 profile is a recognized industry-standard cross-section; listed competitor equivalents include the 2300BAC-WH and V2400BC, which means the T45BIW8 base can replace or extend existing raceway runs using those profiles without a full rip-and-replace when you are adding capacity to an existing installation.
This base is suited to cable management and routing applications for structured cabling, security camera drops, access control wiring, and in-ceiling-not-permitted fiber runs. It is not rated for outdoor wet-location use — installations in covered exterior corridors or loading docks with moisture exposure should use a product with an explicit wet-location listing. For a broader view of how raceway planning fits into a camera infrastructure buildout, see the camera installation planning guide.
For security integrators running IP camera home-run cabling or access control wiring along finished walls, the T-45 base accommodates standard Cat6 and RG-59/RG-6 cable diameters comfortably within its 2.38-inch width. Plan fill ratios at or below 40% to leave room for future cable additions without having to upgrade to a wider channel. PoE switch patch runs and low-voltage control wiring are both appropriate for this raceway type.
Frequently Asked Questions
Q: What cover does the T45BIW8 base use?
A: The T45BIW8 base is designed for use with the Panduit T-70 cover, sold separately. The base and cover are separate SKUs, which lets you stage installation — run and test cabling first, then dress with covers.
Q: How many linear feet are in one pack of T45BIW8?
A: Each pack contains 8 pieces at 8 feet each, for 64 linear feet per pack. The full carton contains 160 pieces (1,280 linear feet). The minimum order quantity is 20 pieces.
Q: Is the T45BIW8 suitable for outdoor use?
A: The T45BIW8 is a PVC surface raceway base intended for interior perimeter-wall applications. It does not carry an explicit wet-location or outdoor listing based on available evidence. For covered exterior or damp-location runs, verify wet-location suitability with the manufacturer before specifying.
Q: What compliance certifications does the T45BIW8 carry?
A: The T45BIW8 is UL Listed, CSA Certified, CE Marked, and RoHS compliant. These four marks cover North American electrical inspections, EU market entry, and hazardous-substance restrictions for healthcare and public-sector facilities.
Q: Can the T45BIW8 replace a 2300BAC-WH or V2400BC raceway?
A: Yes — the T45BIW8 lists the 2300BAC-WH and V2400BC as competitor equivalents, meaning the T-45 profile is dimensionally comparable and can be used to extend or replace runs originally built on those profiles.
Q: What materials and colors is the T45BIW8 available in?
A: The T45BIW8 is PVC in an off-white (blanc cassé) finish. PVC accepts standard latex paint if a custom color match is required for the installation.
When integrators ask about the T45BIW8, the first question I ask back is: have you calculated your fill ratio? At 2.38 inches wide and 0.73 inches tall, the T-45 channel is well-suited for mixed low-voltage runs — Cat6 data, fiber, and RG-6 — but it is not a wide-body raceway. If you are pulling six or more Cat6 home runs plus a coax pair in the same base, you will hit the practical fill limit and you will not have room to add circuits later without ripping the covers back off.
Technical Highlights:
- Pre-punched mounting holes: Each 8-foot section comes factory-punched, which eliminates a step per section on long corridor runs. On a 200-foot run (25 sections), that is 25 fewer punch operations — not trivial when you are on a day-rate crew.
- Pack quantity of 8 × 8 ft (64 lin. ft per pack): The pack structure makes job-site material management straightforward. One pack covers a standard classroom perimeter or a medium server-room wall run without splitting a carton.
- UL Listed + CSA Certified: Both marks on one SKU means one product satisfies both U.S. and Canadian electrical inspection requirements — useful on cross-border projects or facilities with inspectors from either jurisdiction.
Deployment Considerations:
- The T45BIW8 base requires the T-70 cover (separate SKU) to close the channel. Do not assume the cover is included — order both SKUs together or you will have an open trough on the wall until covers arrive.
- Minimum order quantity is 20 pieces. At 8 feet per piece, that is 160 linear feet minimum — right-size your order to the job or you will be carrying excess inventory back. The carton quantity of 160 pieces (1,280 linear feet) is a school- or campus-scale buy, not a single-room job.
For a healthcare facility or K-12 school where structured cabling and security camera drops share finished interior walls, the T45BIW8 is the practical choice: it satisfies UL/CSA inspection, accommodates mixed cable types in one channel, and the low 0.73-inch profile keeps it code-compliant in corridors where surface obstruction clearances are measured.
