Hanwha XNP-C9310R/KEX 4K AI PTZ Network Camera with 31x Optical Zoom and 250m Adaptive IR
Overview
The Hanwha XNP-C9310R/KEX is an 8-megapixel (4K UHD) AI-driven PTZ camera built for deployments where long-range identification and low-light performance are non-negotiable — think perimeter protection at industrial sites, large parking structures, port facilities, and critical infrastructure. At 31x optical zoom paired with Wise Auto Focus (an AI-based continuous focus engine), this camera tracks and locks on subjects at distance without the hunting lag that plagues conventional autofocus PTZs. If your team has lost evidence-quality footage because a legacy PTZ missed focus on a moving subject at 150 meters, the engineering decisions behind this unit are directly relevant to that problem.
Explore the full Hanwha Vision IP camera lineup for complementary models across the surveillance portfolio.
Key Features
- 8MP 4K UHD at 30fps: Full 3840×2160 resolution delivered continuously at 30 frames per second — no dropped frames at peak resolution. At 4K you get roughly four times the pixel density of 1080p, which means license plates and facial features remain readable even when you digitally crop into the frame after the fact. For investigators pulling stills from recorded footage, this is the difference between usable and inadmissible.
- 31x Motorized Varifocal Zoom (6.91–214.64mm): A horizontal field of view that spans 60.6° at wide to a tight 2.59° at full tele. In practical terms, this camera can cover a broad parking lot overview and then optically zoom into a vehicle plate 200 meters away — all without moving the camera or switching to a secondary device. The zoom range reduces the number of fixed cameras required to cover equivalent ground.
- Wise Auto Focus (AI-Based): Conventional PTZ autofocus uses contrast detection, which causes brief defocus during rapid pan or zoom transitions. Wise AF uses an AI inference engine to predict and compensate, keeping subjects sharp through movement. For security operators actively tracking subjects, this reduces operator fatigue and missed captures.
- Adaptive Wise IR to 250m (820ft): The IR illuminators adapt their beam angle as the camera zooms — wide IR spread at wide angle, narrowed to a concentrated beam at tele — preventing the overexposed foreground that occurs when fixed IR illuminators are paired with zooming optics. At 250 meters effective range, this covers perimeter fence lines that would require multiple fixed IR cameras to match.
- 120dB Extreme WDR: With 120dB WDR, the camera can simultaneously expose the bright exterior through a gate and the darker interior of a guard booth in the same frame without blowing out highlights or crushing shadows. This is a critical spec for any scene involving vehicle entry points, building lobbies with glass facades, or transitions between covered and open areas.
- 0.06 Lux (Color) / 0.006 Lux (B&W) Minimum Illumination: Near-darkness performance without switching to black-and-white until ambient light drops to 0.006 lux. Color retention at low light is operationally useful — clothing color, vehicle color, and signage remain identifiable for a longer portion of the night cycle without IR assistance.
- H.265 + WiseStream III Compression: H.265 cuts storage and bandwidth by approximately 50% versus H.264 for equivalent quality. WiseStream III (AI-based dynamic compression) takes this further by applying higher compression to static background areas and preserving bitrate for moving subjects — directly reducing NVR storage requirements and network load on multi-camera deployments. MJPEG is available as a fallback for legacy integrations.
- IP66/IP67, IK10, NEMA 4X: IP66 covers rain and dust ingress. IP67 adds short-term submersion tolerance. IK10 is the highest vandal resistance rating available — withstands 20-joule impacts. NEMA 4X covers washdown environments and corrosion resistance. This combination qualifies the camera for coastal installations, vehicle washdown areas, and exposed rooftop mounts where lesser-rated units fail prematurely.
- Operating Temperature Range -50°C to +55°C: Deployment is viable from extreme cold-storage environments and sub-Arctic outdoor installations through to high-heat industrial settings. At -50°C this camera operates where most PTZs require supplemental heating elements, potentially simplifying installation design.
- TPM with FIPS 140-2 Level 2 Cybersecurity: The hardware TPM (Trusted Platform Module) at FIPS 140-2 Level 2 provides cryptographic key protection at the hardware level — relevant for government, finance, and critical infrastructure deployments where cybersecurity compliance frameworks are audited. This is not a software-only claim; the TPM is a dedicated secure element on the board.
- ONVIF Profile S/G/T/M: Profile S covers basic streaming and PTZ control. Profile G adds onboard recording and retrieval. Profile T includes H.265 and HTTPS. Profile M covers metadata and analytics integration. Taken together, this camera integrates with any ONVIF-compliant VMS without vendor-specific plugins for core functionality — a real advantage in mixed-vendor environments or when VMS platform decisions are still pending.
- Max 62W / Typical 23W Power Consumption: Peak draw of 62W will require PoE++ (802.3bt) or a dedicated mid-span injector — standard 802.3af (15.4W) and 802.3at (30W) switches will not power this camera. Plan your power budget accordingly. Typical 23W during normal PTZ operation gives you a more realistic number for average switch load calculations.
Integration and Compatibility
The XNP-C9310R/KEX (often searched as XNP C9310R/KEX) supports ONVIF Profile S, G, T, and M, providing broad compatibility with major VMS platforms including those requiring metadata and analytics integration via Profile M. The AI analytics engine supports edge-based intelligence that reduces reliance on server-side processing — relevant for deployments scaling to large camera counts where VMS server load is a bottleneck. Pendant mount configuration is the primary installation orientation for this unit. The 0–100% RH operating humidity rating means condensation is not a limiting factor in humid climates or indoor wet areas.
For recording infrastructure, pair this camera with a compatible network video recorder that supports PoE++ or plan for mid-span injectors. If you are designing the full system architecture, review our PTZ security cameras category to compare coverage and zoom profiles across available models. Switch infrastructure needs to be sized for the 62W peak draw — consult our PoE network switches section for 802.3bt-capable options. For overall camera selection guidance, the camera selection guide covers how to match zoom ratio and resolution to coverage distance requirements.
Frequently Asked Questions
Q: What power supply standard does the XNP-C9310R/KEX require?
A: The XNP-C9310R/KEX draws up to 62W at peak, which exceeds both 802.3af (15.4W) and 802.3at PoE+ (30W) capacity. You will need a PoE++ (802.3bt) switch port or a dedicated mid-span injector rated for at least 62W to power this camera. Typical operating draw is 23W, but the switch or injector must be sized for peak.
Q: What is the maximum IR range on the XNP-C9310R/KEX?
A: The adaptive Wise IR system reaches 250 meters (820 feet). Importantly, the IR beam angle automatically adjusts as the lens zooms, maintaining appropriate illumination coverage across the full 31x zoom range without overexposing close subjects or underexposing distant ones.
Q: Does the XNP-C9310R/KEX support ONVIF?
A: Yes. The camera supports ONVIF Profile S, G, T, and M. Profile M is the most recently defined profile and enables metadata and AI analytics integration with compatible VMS platforms, beyond basic streaming and PTZ control.
Q: What cybersecurity certifications does the XNP-C9310R/KEX have?
A: The camera includes a hardware TPM (Trusted Platform Module) certified to FIPS 140-2 Level 2. This provides hardware-level cryptographic key storage and protection, which is relevant for deployments subject to government or financial sector cybersecurity audit requirements.
Q: What are the temperature limits for the XNP-C9310R/KEX?
A: The operating temperature range is -50°C to +55°C (-58°F to +131°F). This qualifies the camera for cold-climate outdoor installations and high-heat industrial environments without supplemental heating or cooling equipment in most scenarios.
Q: What vandal and weather resistance ratings does the XNP-C9310R/KEX carry?
A: The camera is rated IP66 and IP67 for dust and water ingress resistance, IK10 for impact resistance (the highest standard IK rating at 20 joules), and NEMA 4X for corrosion and washdown resistance. This combination supports coastal, industrial washdown, and exposed exterior installations.
The spec that sets the XNP-C9310R/KEX apart from most PTZs in this class is the combination of Wise AF with a 31x optical zoom at 4K resolution. Most integrators who have commissioned long-range PTZ projects know the frustration: you get the zoom range, but the autofocus can't keep pace when a subject moves through the frame at tele end. The AI-based focus engine here is designed specifically to eliminate that lag, which is meaningful when the footage has to hold up under review.
Technical Highlights:
- Adaptive Wise IR (250m): The IR beam angle tracks the zoom position — at wide end it spreads to match the 60.6° horizontal field; at tele it narrows to concentrate illumination at 250 meters. Fixed-angle IR units cannot do this, and the result at tele on a fixed IR PTZ is an underlit subject at distance.
- 120dB WDR: At 120dB, this camera handles the dynamic range challenge at vehicle entry points — bright sky visible through an open gate, dim interior booth, and vehicle headlights all in the same frame simultaneously without sacrificing detail in any zone.
- FIPS 140-2 Level 2 TPM: Hardware TPM at this certification level is not standard on most PTZ cameras in this segment. For any deployment touching federal compliance frameworks or financial sector security standards, this is a checkable box that most competitor units cannot match without additional external hardware.
Deployment Considerations:
- Power planning is non-negotiable: peak draw of 62W requires 802.3bt PoE++ infrastructure or a dedicated injector. Do not assume existing 802.3at switch ports will work — they will not. Audit your switch inventory before quoting this camera to an end user.
- The pendant mount form factor is primary for this unit. If the installation requires wall mount or ceiling flush, confirm adapter compatibility with the physical housing dimensions (ø188×264.9mm) before finalizing conduit and back-box layouts.
This camera is best positioned for high-security perimeter applications at ports, energy infrastructure, and large logistics campuses where a single PTZ must cover both wide-area situational awareness and telephoto-range identification — and where cybersecurity compliance documentation is part of the project deliverable.
