Axis

SKU: 5801-641

Axis T8061 Ethernet Surge Protector - 5801-641

10 kV surge protector for PoE cameras and Ethernet devices

• Clamps transient overvoltages up to 10 kV from lightning strikes
• IP66 rated for outdoor junction boxes and pole-mounted installations
• Compact inline form factor compatible with 802.3af/at/bt PoE standards

Code Blue

SKU: 41421

Code Blue 41421 IP Surge Suppressor

• MOV + gas discharge topology clamps 6kV+ transients before they reach PoE endpoints.
• Supports 802.3af/at/bt PoE pass-through with no voltage drop or signal degradation.
• Inline RJ45 Cat5e/Cat6 form factor installs into existing runs without recabling.

Code Blue

SKU: 41471

Code Blue 41471 Surge Protector Analog

• Suppresses lightning and switching transients to protect analog camera circuits.
• Parallel wiring configuration adds no series impedance to the protected power feed.
• Compact form factor mounts inside control panels without requiring dedicated rack space.

Code Blue

SKU: 41472

Code Blue 41472 Surge Protector Analog - 3 Pack

• Passive analog design activates instantly on voltage transient—no firmware or batteries needed.
• 3-pack covers multiple 12V DC camera feeds, alarm panels, or PoE injector outputs per order.
• Compact form fits DIN rail, junction boxes, and racks with no enclosure modifications required.

ELK Products

SKU: ELK-SWR

ELK Products Surge Protector Module - ELK-SWR

• RF directional coupler and power meter for transmission line testing
• Measures forward power, reverse power, and VSWR inline with TX
• 770-790g unit installs between transmitter and antenna feed

Speco Technologies

SKU: SPCOAX2

Speco Technologies SPCOAX2 Coaxial Video Surge Protector

Passive coaxial surge protection for TVI/CVI/AHD/960H—no power needed

• Passive design requires zero external power—safe to deploy at remote camera endpoints.
• Compatible with TVI, CVI, AHD, and 960H—one SKU covers mixed analog camera fleets.
• Inline coax connection installs in seconds with no signal reconfiguration required.

Speco Technologies

SKU: SPTVIVP

Speco Technologies SPTVIVP TVI Video and Power Surge Protector

TVI video and DC 56V surge protection for 4K camera systems

• Protects TVI video and DC 56V power lines from transient surges simultaneously.
• Supports 4K (3840×2160) resolution, compatible with modern TVI camera deployments.
• Outdoor-rated in a compact 2.6"×3.4"×1" housing with ONVIF Profile I compliance.

Speco Technologies

SKU: SPUTPVD

Speco Technologies SPUTPVD UTP Data Surge Protector Terminal Conn

Inline UTP surge protection for IP cameras and access control systems

• Clamps surges up to 4 kV in 1 ns, protecting cameras and NVRs from transients.
• Passive inline design requires no external power; insertion loss under 0.2 dB.
• NDAA Section 889 Part B compliant; rated for 300 surge events at 100 A each.

Speco Technologies

SKU: SPVP

Speco Technologies SPVP Video & Power Surge Protector

Dual-channel surge protection for video and 12V DC power lines

• Dual-channel design protects coax video and 12V DC power circuits simultaneously.
• Passive architecture requires no external power or network configuration to deploy.
• NDAA Section 889 Part B compliant; backed by a 3-year manufacturer warranty.

Ubiquiti

SKU: ETH-SP-G2

Ubiquiti ETH-SP-G2 PoE Surge Protector

Inline PoE surge protection for outdoor network devices

• Inline PoE 802.3af passthrough adds surge protection without active power draw.
• Rated for outdoor use across -30 to 65 °C, suitable for rooftop and exterior installs.
• Dual RJ45 female connectors allow drop-in deployment on any existing PoE cable run.

Ubiquiti

SKU: UACC-ETH-SP-DIN

Ubiquiti UACC-ETH-SP-DIN Bidirectional Ethernet Surge Protector

Inline Ethernet surge protection with 20kA handling and 10 Gbps pass-through

• Bidirectional Ethernet surge protector, 20kA discharge
• 10 Gbps PoE++ pass-through for high-draw devices
• DIN-rail or wall mount in 89mm housing

Ubiquiti

SKU: UACC-ETH-SP-PRO

Ubiquiti UACC-ETH-SP-PRO Outdoor Ethernet Surge Protector

Dual-port Ethernet surge protection for outdoor PoE networks up to 10 Gbps

• Handles surge transients up to 1 kV/µs ESD, protecting outdoor PoE links from damage.
• 10 Gbps passthrough on dual RJ45 ports preserves full bandwidth for cameras and APs.
• IPX5-rated polycarbonate enclosure operates from -30 to 65 °C for harsh outdoor installs.