Rack Power Supplies
Showing Results for Rack Power Supplies
-
Altronix
SKU: R615DC8CB220
Altronix R615DC8CB220 8-Output 220V Rack Power Supply
8-output 220VAC rack supply with selectable 6–15VDC for CCTV systems
- 8-output 220VAC rack power supply, 6-15VDC
- PTC self-resetting protection on each output
- 4A per output for multi-device deployments
$545.00 $330.99 Save $214.01The item has been added -
Altronix
SKU: R615DC8UL
Altronix R615DC8UL 8-Output Fused DC Power Supply
8-channel 6-15VDC rack supply with independent fused outputs for security
- Eight independently fused 4A outputs isolate faults to individual circuits.
- Selectable 6–15VDC output accommodates cameras, readers, and mixed device loads.
- 2U rack-mount form factor with UL Listed and CE approvals meets enterprise compliance.
$543.93 $328.99 Save $214.94The item has been added -
Altronix
SKU: R615DC8ULCB
Altronix R615DC8ULCB 8-Output 6-15VDC Rack Power Supply
8-channel 6–15VDC rack supply with PTC protection for mixed-voltage systems
- Eight PTC-protected outputs self-reset after faults, eliminating manual fuse replacement.
- Adjustable 6–15VDC output supports mixed analog, IP, and access control loads on one unit.
- 4A per channel in a 2U rack footprint consolidates power for up to 8 independent circuits.
$543.93 $328.99 Save $214.94The item has been added -
Altronix
SKU: SAV182D
Altronix SAV182D 18-Output 12VDC CCTV Power Supply
18-output 12VDC supply for mid-scale camera and access control systems
- 18 isolated 12VDC outputs prevent a single camera fault from cascading system-wide.
- 11A total capacity at 12VDC supports 15–25 cameras in mid-scale deployments.
- Class 2 rated with lifetime warranty; fits BC300 enclosure at 8.5" × 7.5" × 3.5".
$395.38 $217.99 Save $177.39The item has been added -
Altronix
SKU: SAV18D
Altronix SAV18D 18-Output 12VDC Power Supply
18-output 12VDC power supply, 5A per channel, dual 115/230VAC input
- 18 independent 12VDC outputs at 5A each support mixed PTZ, camera, and reader loads.
- Dual 115/230VAC input handles varied facility power standards from a single SKU.
- Class 2 certification ensures current-limited, mains-isolated outputs across all channels.
$280.66 $279.99 Save $0.67The item has been added -
Altronix
SKU: SAV36D
Altronix SAV36D 36 Output CCTV Power Supply; 12VDC @ 12
16-output 12VDC power supply for distributed CCTV camera feeds
- 16 independent 12VDC outputs simplify centralized power distribution across camera runs.
- 11A @ 12VDC maximum current supports high-load multi-camera deployments from a single unit.
- UL Listed with a Lifetime Limited Warranty reduces compliance risk and long-term replacement cost.
$445.99 $244.99 Save $201.00The item has been added -
Add to Cart The item has been addedAltronix
SKU: SAV4D
Altronix SAV4D 4-Output 12VDC CCTV Power Supply
Four 12VDC isolated outputs, 6A per channel for multi-camera CCTV
- Four isolated 12VDC outputs prevent a single-channel fault from dropping the full system.
- PTC Class 2 supervision auto-resets after overcurrent — no manual fuse replacement needed.
- Regulated 12VDC from 115VAC input shields cameras from brownout sag and AC ripple.
In stock · Ships same business day$200.65 $199.99 Save $0.66The item has been added -
Altronix
SKU: SAV9D
Altronix SAV9D 9-Output 12VDC CCTV Power Supply
9-output 12VDC power supply for compact CCTV installations
- Nine PTC-protected outputs isolate faults per circuit, keeping remaining cameras live.
- Regulated 12VDC output prevents voltage sag across multi-device surveillance deployments.
- UL Listed with lifetime warranty; fits BC100 enclosure at 8.5" × 7.5" × 3.5".
In stock · Ships same business day$210.40 $209.99 Save $0.41 -
Altronix
SKU: T1RAL3L8
Altronix T1RAL3L8 8-Output Dual Voltage Rack Power System
8-output rack power system with dual voltage for security infrastructure
- 12 independent outputs at 24VDC/12A total consolidate multi-device power in one rack unit.
- AC fail supervision signals mains loss to panels or NVRs for automated failover response.
- Battery backup compatibility and rack/wall/pole mount options suit diverse installation sites.
$1,725.12 $1,158.99 Save $566.13The item has been added -
Altronix
SKU: T1RHW3F4D
Altronix T1RHW3F4D 4-Output Rack Mount Power Distribution
4-output rack mount power distribution with integrated UPS backup
- Four supervised outputs with fault indication enable proactive circuit maintenance.
- Integrated battery backup maintains critical circuits during mains failure.
- Standard 19-inch rack mount form factor fits new deployments and retrofits.
$2,174.02 $1,193.99 Save $980.03The item has been added -
Altronix
SKU: T1RM34
Altronix T1RM34 4-Door Fused Power Rack 115V
4-door fused power rack for 115V access control and security systems
- Four independent fused circuits provide isolated overcurrent protection per door zone.
- Rack-mount form factor integrates directly into standard 19-inch equipment cabinets.
- 115V AC input works with standard North American infrastructure; Lifetime warranty included.
$1,809.92 $975.99 Save $833.93The item has been added -
Altronix
SKU: T1RSH1F4
Altronix T1RSH1F4 4-Door Rack Power Controller
4-door rack mount controller with dual 12/24VDC power and fail-safe relays
- Dual 12/24VDC output at 4A supports mixed door hardware without a separate supply.
- Four independently fused relay outputs allow fail-safe or fail-secure config per door.
- 24-inch rack-mount form factor with tamper switch simplifies compliant cabinet builds.
$1,797.73 $1,109.99 Save $687.74The item has been added -
Altronix
SKU: TM3B
Altronix TM3B TROVE3 Mounting Bracket Enclosure
DIN-rail mounting bracket enclosure for TROVE3 ALTX and MERC systems
- Mounts TROVE3 ALTX and MERC modules, reducing SKU count across multi-site deployments.
- DIN-rail compatible design integrates with standard industrial access control infrastructure.
- Lifetime warranty covers structural support and enclosure integrity for long-term installations.
$428.07 $234.99 Save $193.08The item has been added -
Altronix
SKU: VERTILINE12DCBV
Altronix VERTILINE12DCBV 12VDC Power Supply Board
12VDC regulated board for Altronix VERTILINE enclosures
- Delivers 24VDC regulated output at up to 12A across 12 discrete output circuits.
- Supports PoE++ (802.3bt) for high-power device deployments in rack-mount configurations.
- AC fail supervision and battery backup maintain power continuity during grid interruptions.
$300.93 $299.99 Save $0.94The item has been added -
Altronix
SKU: VERTILINE16
Altronix VERTILINE16 16-Output Rack-Mount Power Supply
16-channel 24/28VAC rack-mount supply for security & access control
- 16 independent 24/28VAC outputs at 10A each consolidate mid-to-large camera runs.
- Rack-mount form fits standard 19" enclosures, eliminating external terminal blocks.
- UL Listed with a Lifetime Limited Warranty supports code-compliant installations.
$1,051.25 $577.99 Save $473.26The item has been added -
Altronix
SKU: VERTILINE166
Altronix VERTILINE166 16-Output Rack Mount CCTV Power Supply
16-output 1U rack supply for mid-to-large CCTV systems, 24/28VAC
- 16 independently protected outputs distribute 24/28VAC to cameras from a single 1U rack slot.
- Selectable 24 or 28VAC output accommodates mixed camera voltage requirements in one unit.
- UL Listed with a Lifetime Limited Warranty, reducing compliance risk on large-scale deployments.
$1,223.69 $671.99 Save $551.70The item has been added
Rack Power Supplies
Rack-mount power supplies deliver regulated DC to access control panels, CCTV head-ends, and intrusion systems from a 19-inch rack or cabinet. They provide battery backup, output supervision, and centralized distribution for multi-door or multi-camera installations.
Plan Your Deployment
- Output voltage (12/24 VDC) and total amperage at continuous load
- Rack units (1U, 2U, 3U) and depth for the cabinet
- Battery backup sizing (amp-hours) for target hold-up time
- Output count and individually fused/supervised channels
- Fire alarm interface for controlled lock release on alarm
What to Look For
Size the supply for 125% of the calculated continuous load and confirm the battery bank meets the hold-up time required by local code (commonly 4 or 24 hours). Supervised outputs report shorted or open circuits back to the panel, which is required for UL 1076 and UL 294 installations. Rack integration keeps service access at the central gear location.
Common Deployment Scenarios
Rack power supplies are standard in enterprise IDF closets, data center security rooms, and multi-door openings where copper home-runs converge on a central location. They replace scattered wall-wart or transformer-based power in larger systems.