Altronix

SKU: T1RSH3CK1D

Altronix T1RSH3F8D PRE-WIRED - T1RSH3CK1D

Altronix

SKU: T1RV3F4

Altronix T1RV3F4 Trove1R enclosure with Altronix/HID Vert

4-door access control kit with integrated power and HID VertX support

• Manages four independent door access points from a single rack-mounted integration kit.
• Supervised relay outputs provide fault detection across all four power distribution circuits.
• Supports Wiegand and IP reader protocols, reducing rewiring when mixing credential hardware.

Altronix

SKU: T1SAK34

Altronix T1SAK34 4-Door Access Power Integration Kit

4-door access power hub with dual 12/24VDC and 6A per channel

• Distributes 12/24VDC selectable power across 4 doors from a single chassis.
• 6A output capacity handles simultaneous mag-lock and door-strike loads without derating.
• Integrated fusing per circuit limits fault propagation and satisfies UL listing requirements.

Altronix

SKU: T1SAK34D

Altronix T1SAK34D Dual-Voltage 12/24VDC 6A Power Supply

Selectable 12/24VDC 6A supply for security systems with PTC protection

• Selectable 12VDC or 24VDC output eliminates field rewiring when voltage requirements change.
• 6A continuous current supports multiple locks, readers, and intercoms on a single supply.
• PTC resettable overload protection reduces service calls by eliminating blown-fuse replacements.

Altronix

SKU: T1SAK3F4

Altronix T1SAK3F4 4-Door Access Control Kit

4-door access control kit with integrated power distribution and Salto reader

• Controls four independent door points with per-door authentication and event logging.
• Bundled PDS8 and VR6 modules deliver centralized power distribution with circuit protection.
• Ships with eFlow6NB, ACM4, VR6, and PDS8 pre-matched, reducing component selection time.

Altronix

SKU: T1VK3F4

Altronix T1VK3F4 4-Door Access Control Integration Kit

4-door access control power kit with HID VertX integration and battery backup

• Supports 4 independent door outputs at regulated +12VDC via integrated VR6 module.
• 6A eFlow6NB module provides battery backup with automatic switchover for uninterrupted control.
• Native HID VertX compatibility simplifies deployment; lifetime warranty covers the full kit.

Altronix

SKU: T1V3CK1

Altronix T1VK3F4S PRE-WIRED FOR 4DR - T1V3CK1

Altronix

SKU: T1V3CK1D

Altronix T1VK3F4SD PRE-WIRED FOR 4DR - T1V3CK1D

Altronix

SKU: T24130D

Altronix T24130D 24VAC 100VA Dual-Voltage Transformer

24VAC 100VA transformer with dual 115/220VAC input for global installations

• Dual 115/220VAC input eliminates region-specific SKUs across multi-jurisdiction deployments.
• 100VA output supports 4–6 access control readers or a single alarm panel simultaneously.
• Open-frame design mounts directly to DIN rail or panel backplate—no bracket required.

Altronix

SKU: T2428100

Altronix T2428100 100VA Open Frame Transformer

100VA step-down transformer, 115VAC to 24/28VAC, open frame mount

• Steps down 115VAC to 24/28VAC at 100VA, powering 4–6 access control devices simultaneously.
• Open frame design mounts to DIN rail or backplates, reducing labor and hardware in retrofit installs.
• Compact 2.56"×3.57"×2.25" footprint leaves room for relays and terminals in shared enclosures.

Altronix

SKU: T2428100220

Altronix T2428100220 24VAC or 28VAC 100Va Xfmr 220v

220VAC to 24/28VAC step-down transformer, 100VA for access control

• Accepts 220VAC input directly, eliminating a pre-stage transformer in international installs.
• Field-selectable 24VAC or 28VAC output covers both North American and European access control devices.
• UL Listed, 100VA single-output design with a lifetime warranty for long-term deployment confidence.

Altronix

SKU: T2428100C

Altronix T2428100C 100VA Open Frame Transformer

100VA step-down transformer, 220VAC input, 24/28VAC selectable output

• 100VA / 4A output drives access control readers, electric locks, and modules simultaneously.
• Selectable 24VAC or 28VAC output covers mixed device requirements from a single unit.
• 220VAC primary input integrates directly into European, Asian, and African mains without pre-conversion.

Altronix

SKU: T2428100C220

Altronix T2428100C220 Transformer - 24VAC/100VA (4 amp)

220VAC to 24/28VAC open frame transformer, 100VA/4A for enclosures

• Accepts 220VAC mains (50/60 Hz), eliminating step-down converters in EU/international sites.
• Dual 24/28VAC output at 4A supports legacy access control and modern IP cameras from one unit.
• Open frame design mounts directly in enclosures, cutting footprint and wiring complexity.

Altronix

SKU: T2428100CP

Altronix T2428100CP 100VA Transformer Enclosure

100VA step-down transformer, 220VAC to 24/28VAC with fused protection

• Steps down 220VAC to 24/28VAC at 100VA, covering mid-range access control loads.
• Fused secondary protection limits fault damage to downstream devices and wiring.
• Integrated enclosure simplifies mounting and wiring for intercoms and electric strikes.

Altronix

SKU: T2428175

Altronix T2428175 Open Frame Transformer 175VA

175VA step-down transformer for access control and security systems

• 115VAC primary steps down to 24VAC or 28VAC, covering mixed-voltage device installations.
• 175VA capacity at 7.25A supports multiple door strikes, mag-locks, and auxiliary loads.
• Open frame design integrates directly into enclosures and control panels without added housing.

Altronix

SKU: T2428175C

Altronix T2428175C 24/28VAC 175VA Open Frame Transformer

115VAC to 24/28VAC open frame transformer, 175VA for security systems

• Selectable 24VAC or 28VAC secondary lets one unit serve dual-voltage security loads.
• 175VA output capacity handles access control panels and alarm systems simultaneously.
• Open frame construction simplifies integration into custom enclosures and control cabinets.