Panduit CTFP-25 Pneumatic Ferrule Crimp Press
The Panduit CTFP-25 is a benchtop pneumatic crimp press engineered for high-volume ferrule termination in control-panel assembly, industrial automation, and building-system installations. Designed for 24–14 AWG (0.25–2.5 mm²) loose-piece ferrules, it delivers consistent, code-compliant crimps at production speed while occupying minimal bench space. Foot-pedal actuation and a coiled air line allow flexible workstation layout, and integrated ferrule storage keeps components within reach. For integrators running wire in datacenter racks, fire-alarm panels, or access-control hubs, the CTFP-25 eliminates hand fatigue and cycle-time bottlenecks that manual ratchet tools introduce on medium-to-large projects.
Key Features
- Pneumatic crimp head for 24–14 AWG (0.25–2.5 mm²) ferrules — dieless design accommodates Pan-Term and compatible ferrule families without die changes
- Foot-pedal actuator with coiled air line — hands stay on the wire during crimps; setup adapts to left- or right-side bench configurations
- Integrated open ferrule containers on the pneumatic head — two storage compartments hold mixed ferrule sizes for fast color-code selection
- Compact 7.8 × 5.3 × 2.9 in footprint — fits crowded assembly benches alongside strippers, label printers, and multimeters
- Fast crimp stroke — pneumatic cylinder completes the crimp in under one second; no manual pumping or reset delays
- 5 bar / 72 psi compressed-air operation — ties into existing shop-air systems; requires standard quick-disconnect fitting
The CTFP-25's dieless pneumatic head accepts the full range of insulated and non-insulated ferrules from 0.25 mm² to 2.5 mm² without tooling swaps. This span covers 24 AWG control wiring in fire panels, 18 AWG I/O bundles in PLC cabinets, and 14 AWG power feeds in access-control power supplies. Unlike manual ratchet crimpers that require 15–20 lb of grip force per crimp, the foot pedal lets you position the ferrule and wire with both hands, then tap the pedal to fire the press. The result is straighter ferrule alignment, fewer rejected crimps, and no hand fatigue after terminating a 48-port patch panel's worth of twisted pairs. The pneumatic cylinder delivers 6:1 mechanical advantage at consistent pressure, so every crimp seats the ferrule's crimp barrel to the same depth—critical when panels undergo UL 508A or NFPA 72 inspection. The coiled air line stretches to 6 ft, so you can mount the press on a rolling cart for job-site pre-termination or anchor it to a fixed bench and route hoses overhead.
In datacenters and equipment rooms where grounding, shielding, and DC-power distribution demand ferrule-terminated stranded wire, the CTFP-25 integrates into assembly lines alongside wire strippers and heat-shrink stations. The two open ferrule bins on the pneumatic head hold separate colors (red 0.5 mm², blue 1.5 mm², gray 2.5 mm²) so you can switch sizes without reaching for parts bins. For integrators building breakout harnesses—24-pair Category-rated cable fanning into individual ferrule-terminated conductors for terminal blocks—the foot-pedal workflow becomes: strip, insert ferrule, crimp, set down, repeat. No tool repositioning, no grip-strength variation. The small footprint leaves bench space for a laptop running panel-layout CAD or a label printer generating wire markers. Because the press operates on standard shop air (5 bar / 72 psi), you can install a wall-mounted quick-disconnect at each termination station and swap the tool between benches in seconds. Facilities already running pneumatic wire strippers or air-driven label applicators add the CTFP-25 to the same manifold.
Panduit's Pan-Term ferrule line meets UL 486E and CSA C22.2 No. 65 for wire terminations in industrial control panels and building systems, and the CTFP-25 press applies the crimp force and geometry those certifications require. The dieless head design ensures compatibility with future ferrule updates without retooling investment, and the single-moving-part pneumatic cylinder delivers years of service in high-cycle environments. For commercial integrators spec'ing ferrule tools into equipment racks, the CTFP-25 offers the speed of a production press in a form factor that fits mobile tool carts and bench-constrained server rooms.
