Middle Atlantic Plgmd 5FT.SGL CRT 12IN.O - V20GB512

Middle Atlantic V20GB512 Plugmold Aluminum Multioutlet Strip

Overview

The Middle Atlantic V20GB512 is a 5 ft (1.5 m) aluminum Plugmold multioutlet strip designed for structured rack and raceway installations where consistent outlet placement and clean cable management matter. With receptacles spaced at 12 in (30.5 cm) intervals, the V20GB512 gives installers predictable outlet positioning along the full length of the strip — useful when distributing power to equipment with fixed cord lengths or when spacing prevents outlet conflicts in tight enclosures. TAA compliance makes this a viable option for government, federal, and publicly funded installations subject to the Trade Agreements Act.

The ivory finish suits most indoor rack and enclosure environments, blending with standard raceway and low-voltage tray colors rather than standing out. Whether you're provisioning power inside an AV rack, a security equipment enclosure, or a structured cabling cabinet, the V20GB512 is built to install once and stay organized.

Key Features

• 5 ft (1.5 m) strip length: Covers a standard 10U–12U vertical run inside a mid-depth rack or mounts horizontally along a wall raceway — long enough for most single-zone power distribution runs without requiring an extension or a second strip.
• 12 in (30.5 cm) receptacle spacing: Outlets every foot along the strip means you can power equipment with standard 1–2 ft power cords without overlap, and reduces the risk of adjacent plugs blocking neighboring outlets — a common frustration with tightly spaced strips.
• Aluminum construction (Plugmold platform): The Middle Atlantic Plugmold line uses aluminum channel construction rather than plastic housing, which holds its shape under the mechanical stress of multiple cables and resists deformation in warm enclosures where plastic strips can warp over time.
• TAA compliant: Qualifies for procurement under U.S. federal contracts and GSA schedules requiring Trade Agreements Act compliance — skip the sourcing variance paperwork on compliant bids.
• Ivory color: Matches standard ivory raceway and surface-mount enclosure systems, keeping installs visually consistent without painting or custom finishing.
• Multioutlet design: Multiple receptacles along a single strip reduce the number of power runs needed into a rack or enclosure — one circuit feed to the strip instead of individual outlets at each device position.

Integration and Compatibility

The V20GB512 is part of the broader power distribution ecosystem for low-voltage and AV rack builds. It pairs naturally with surface-mount raceways and aluminum wireway channels in structured cabling environments. For security and surveillance installations, it fits alongside PoE network switches and NVR enclosures where non-PoE accessories — intercoms, access readers, local displays — still need conventional AC power. When specifying for a rack enclosure build, verify the interior depth and horizontal clearance against the 5 ft length if mounting longitudinally rather than horizontally.

Because this is a surface-wiring Plugmold product, it is intended for finished interior environments. It is not rated for wet or damp locations — plan accordingly for any installation near exterior-facing walls, mechanical rooms, or areas subject to condensation.

Frequently Asked Questions

Q: Is the Middle Atlantic V20GB512 TAA compliant?

A: Yes. The V20GB512 is confirmed TAA compliant, making it eligible for U.S. federal, state, and local government procurement under Trade Agreements Act requirements.

Q: What is the receptacle spacing on the V20GB512?

A: Receptacles are spaced 12 in (30.5 cm) apart along the full 5 ft (1.5 m) length of the strip.

Q: What color is the V20GB512?

A: The V20GB512 is ivory, which matches most standard aluminum raceway and low-voltage enclosure systems commonly used in commercial installations.

Q: Can the V20GB512 be used in outdoor or wet locations?

A: No. The V20GB512 is a surface-wiring Plugmold strip intended for dry, finished interior environments. It is not rated for outdoor, wet, or damp locations.

Q: How long is the V20GB512 strip?

A: The V20GB512 is 5 ft (1.5 m) in length.

Marty Allison

The V20GB512 comes up regularly in federal and municipal security integrations where TAA compliance is a hard procurement requirement — not a nice-to-have. That 12 in receptacle spacing spec is the detail that actually drives the selection decision: at one outlet per foot across a 5 ft strip, you get five evenly distributed AC positions without outlet conflicts, which is exactly what you want when terminating a mix of IP camera power adapters, card reader supplies, and intercom base stations inside a single enclosure.

Technical Highlights:

• 12 in (30.5 cm) receptacle spacing: One outlet per linear foot prevents the plug-stacking problem common on 6 in-spaced strips — standard wall-wart adapters don't block neighbors, and you can pull any device without unplugging the one next to it.
• 5 ft (1.5 m) length: Covers a 10–12U vertical zone or a single-wall horizontal run cleanly — no splicing, no extension, one conduit knockout feed.
• TAA compliance: Verified on this SKU, which means it clears the sourcing gate on GSA and SEWP contract vehicles without a waiver request.

Deployment Considerations:

• Dry interior only — Plugmold aluminum channel is not rated for damp or wet locations; don't spec it in mechanical rooms, near HVAC condensation zones, or in any enclosure with moisture ingress risk.
• Confirm total outlet count against your device count before ordering — at 12 in spacing across 5 ft, you get a fixed number of positions; if your device count exceeds that, you'll need a second strip rather than an extension.

Best fit: TAA-required government security deployments — federal building access control closets, municipal surveillance equipment rooms, and DoD low-voltage enclosures where every component on the BOM needs a compliant sourcing paper trail.