Middle Atlantic Plgmd 6FT.SGL CRT 12IN.O - V20GB612

Middle Atlantic V20GB612 Aluminum Plugmold 6 ft Multi-Outlet Strip

Overview

The Middle Atlantic V20GB612 is a 6-foot aluminum plugmold multi-outlet strip designed for structured rack and AV infrastructure environments where consistent power distribution and clean cable management matter. At 72 inches in length with receptacles spaced every 12 inches, it provides predictable outlet placement along the full run — useful when you need to know exactly where each device taps power without hunting for a free outlet. If you're building out a Middle Atlantic rack system or integrating power distribution into a security or AV installation, the V20GB612 fits cleanly into that workflow.

Key Features

• 6 ft / 72 in Run Length: The full 6-foot span covers most standard rack column heights and AV furniture runs. No daisy-chaining short strips or leaving dead zones at the top or bottom of a rack bay.
• 12-Inch Receptacle Spacing: With outlets every 12 inches, you get predictable, evenly distributed tap points along the strip — useful for lining up power to gear mounted at standard rack-unit intervals. No crowding of transformer blocks or awkward adapter stacking.
• Low-Profile Form Factor (0.78 in Deep, 1.32 in Tall): At under an inch of depth and just over an inch of height, the V20GB612 mounts flat and stays out of the way. In tight rack enclosures or furniture channels where clearance is a constraint, that profile matters.
• Ivory Finish: The ivory color blends into light-colored furniture and AV cabinetry rather than standing out as an afterthought. Relevant when the installation is visible in a conference room, lobby, or retail environment where aesthetics are part of the spec.
• TAA Compliant: The V20GB612 meets Trade Agreements Act requirements, which is a hard gate for federal, state, and municipal government installations. If your project falls under a government contract or federally funded procurement, TAA compliance is non-negotiable — this unit qualifies.

Integration & Compatibility

The V20GB612 is designed to integrate with power distribution infrastructure in rack enclosures, AV furniture, and structured wiring installations. The slim 0.78 in depth and 1.32 in height allow it to fit into standard raceway channels and furniture wire-management cavities. It pairs naturally with rack-mount equipment where evenly spaced outlet access reduces the need for extension cords or outlet adapters. For rack accessory builds requiring TAA-compliant components throughout, the V20GB612 satisfies that requirement without substitution. Consult the Middle Atlantic product catalog for compatible raceway covers, mounting channels, and enclosure families that accept plugmold strips of this form factor.

Frequently Asked Questions

Q: Is the Middle Atlantic V20GB612 TAA compliant?

A: Yes. The V20GB612 is confirmed TAA (Trade Agreements Act) compliant, making it eligible for government and federally funded procurement contracts that require TAA-compliant products.

Q: What is the outlet spacing on the V20GB612?

A: Receptacles are spaced every 12 inches (30.5 cm) along the 6-foot run, giving you predictable, evenly distributed power tap points across the full length of the strip.

Q: What are the physical dimensions of the V20GB612?

A: The V20GB612 is 72 inches (182.9 cm) wide / long, 1.32 inches (3.4 cm) tall, and 0.78 inches (2 cm) deep — a low-profile form factor suited to tight rack and furniture installations.

Q: What color is the V20GB612?

A: The V20GB612 is finished in ivory, which blends into light-colored AV furniture and cabinetry in visible installation environments.

Q: Can the V20GB612 be used in government installations?

A: Yes. TAA compliance is confirmed for the V20GB612, satisfying the Trade Agreements Act requirement common to federal, state, and municipal government procurement contracts.

Eden Phillips

The V20GB612 is the kind of component that gets specified once and forgotten — in the best way. The 12-inch receptacle spacing is what makes it genuinely useful in a structured installation: you know exactly where every outlet lands relative to your rack-mounted gear, which means no last-minute extension cords and no transformer blocks fighting for the same outlet cluster.

Technical Highlights:

• 72-Inch Run: Covers a full standard rack column in a single strip — no seam, no junction, no mismatch in outlet density halfway down the bay.
• 0.78 in Depth Profile: Thin enough to sit inside standard raceway channels without pushing covers out of plane or creating clearance conflicts with adjacent cable runs.
• TAA Compliance: A hard requirement on government-funded integrations — confirmed for this unit, so it doesn't need to be substituted out at the last bid review.

Deployment Considerations:

• Verify that the 12-inch spacing aligns with your equipment's power inlet positions before committing to this strip — some dense rack configurations benefit from closer spacing.
• Ivory finish is the right call for visible AV furniture installations, but if the rack lives in a wiring closet or equipment room, color matching is a non-issue and should not drive model selection.

Best fit for TAA-required government AV or security rack builds where consistent outlet placement and a clean, low-profile power run matter more than raw outlet density.