Panduit PR2VFD0696WH Vertical Single-Sided Cable Manager, 52RU, 6-Inch Wide

Overview

The Panduit PR2VFD0696WH is a single-sided vertical cable manager from the Panduit PatchRunner 2 line — engineered for high-density rack environments where organized cable routing is a hard operational requirement, not a convenience. At 52RU and 6 inches wide, this manager ships fully assembled, which removes field fabrication time and gets your technicians to the cables faster. It pairs with 19-inch and 23-inch EIA racks and mounts to standard rack rails without modification.

Vertical cable managers in this class solve a specific problem: as port density climbs in structured cabling deployments, unmanaged cable bundles block airflow, make moves-adds-changes (MACs) into a guessing game, and create cascade failures when someone pulls the wrong cable. The PR2VFD0696WH keeps runs organized, front to back, over the full 52RU span.

Key Features

• 52RU Coverage Height (95.88 inches / 2,435.2 mm): spans the full usable height of a 52RU rack enclosure in a single piece — no splicing, no misaligned segments. For high-density data center cabinets running patch panels floor to ceiling, this eliminates the mid-point transitions that create cable slack problems over time.
• 6-Inch Width (152.4 mm): wider than a standard 4-inch manager, which matters when you're routing high-count bundles or oversized patch cord diameters in dense 10GbE or fiber deployments. The extra 2 inches is the difference between a tidy run and a pinched-radius problem at the entry finger.
• Metal Backbone with Molded Plastic Fingers: the structural backbone handles the mechanical load of cable bundles across the full 52RU height without flex. Plastic fingers protect jacket insulation from abrasion — a detail that becomes important when you're pulling multi-pair bundles with repeated MACs over a multi-year deployment lifecycle.
• Metal Dual-Hinged Push-Close Door, Full Length: the door covers the entire cable run — not just the top section — and closes by push rather than latch. In an active NOC or data center where doors get opened and closed frequently, a push-close mechanism holds up better under repetitive use than clip or screw closures. The dual-hinge design distributes stress across the door panel when heavy bundles push outward.
• Ships Fully Assembled: no field assembly required. For integrators billing on labor, this is a direct cost reduction — particularly on multi-rack deployments where a dozen managers would otherwise each require assembly time.
• Compatible with 19-Inch and 23-Inch EIA Racks: covers both standard EIA rack widths, which matters in mixed-vintage environments where older 23-inch frames coexist with modern 19-inch cabinets. One SKU covers both form factors.
• RoHS Compliant: meets Restriction of Hazardous Substances requirements — relevant for government, education, and enterprise deployments where procurement requires documented environmental compliance on every installed component, including passive infrastructure.
• White Finish: matches white rack enclosures common in structured cabling and telecommunications rooms, which simplifies color-coded rack planning by zone or function.

Integration & Compatibility

The PR2VFD0696WH is designed for installation alongside standard patch panel and cable management assemblies in 19-inch or 23-inch EIA rack configurations. It installs on the rack column adjacent to active equipment and patch panels — not in a rack unit — freeing your full 52RU of rack space for devices. It is part of Panduit's PatchRunner 2 vertical manager family, which includes both single-sided (one-door) and double-sided variants to match different aisle-facing requirements.

For cable routing planning in large structured cabling builds, pairing vertical managers with horizontal managers at regular intervals is standard practice — the vertical run handles the column routing while horizontals terminate individual patch panel rows. If you're specifying a full rack accessories package, plan your horizontal manager spacing before ordering to ensure cable bend radius is maintained at every transition point.

Frequently Asked Questions

Q: What rack sizes is the PR2VFD0696WH compatible with?

A: The PR2VFD0696WH is designed for use with 52RU, 19-inch and 23-inch EIA racks. It mounts to the rack column and does not occupy rack units.

Q: Does the PR2VFD0696WH arrive pre-assembled or does it require field assembly?

A: It ships fully assembled. No field fabrication is required, which reduces installation time on multi-rack deployments.

Q: What is the overall height of the PR2VFD0696WH?

A: The overall height is 95.88 inches (2,435.2 mm), spanning the full 52RU height.

Q: Is the PR2VFD0696WH RoHS compliant?

A: Yes. The PR2VFD0696WH meets RoHS (Restriction of Hazardous Substances) compliance requirements.

Q: How many units come per package?

A: Each order contains one (1) PR2VFD0696WH single-sided vertical cable manager with door.

Q: What is the width of the PR2VFD0696WH?

A: The width is 6 inches (152.4 mm), providing extra capacity compared to standard 4-inch managers — useful for routing high-count or large-diameter cable bundles.