Vertiv VRA6030 Pass-Through Side Panels 45U x 1200mm
Overview
The Vertiv VRA6030 delivers pass-through side panels sized for 45U x 1200mm open-frame rack enclosures in the Vertiv VR rack line. If you're building out a structured data center rack or network equipment bay and need side enclosure panels that don't trap heat or block airflow paths, pass-through construction is the functional choice over solid panels. The VRA6030 closes the sides of your 45U frame while maintaining the open airflow characteristics the VR chassis is engineered around.
Key Features
- 45U Height Compatibility: Sized specifically for 45U rack frames — not a universal fit. Verify your chassis height before ordering; the 42U variant is VRA6055 and the 48U variant is VRA6032 (both also in 1200mm depth). Using the wrong height panel leaves gaps or creates interference at the top rail.
- 1200mm Depth: Matches 1200mm-depth VR rack frames. The 1200mm footprint is common in data center rows where deeper chassis accommodate dense cable management and rear PDU mounting. If your rack is 1100mm deep, the VRA6029 is the correct 45U alternative.
- Pass-Through Design: Unlike solid side panels, the pass-through construction allows airflow and cable routing through the panel face — practical for hot-aisle/cold-aisle deployments where side-to-side air movement is part of the cooling strategy. Solid panels in the same position would create dead-air pockets on open-frame builds.
- Black Finish: Standard black matches the VR rack family's default color scheme, keeping the installation visually consistent without requiring custom finishing.
- Rack-Mount Installation: Designed to mount directly to the VR rack frame — no additional adapter hardware required for compatible chassis. Straightforward field installation during initial rack build or post-deployment panel additions.
Integration & Compatibility
The VRA6030 is confirmed compatible with the Vertiv VR3305 rack enclosure. It belongs to the broader Vertiv VRA accessory family, which includes split side panels (VRA6009–VRA6012), top panels (VRA6017–VRA6020), networking roof panels (VRA6033–VRA6036), and rack bottom panels (VRA6037–VRA6040). If you're populating a full enclosure, pairing the VRA6030 with a compatible rack top panel and bottom panel from the same VRA series ensures consistent fitment across all surfaces. For cable management requirements, Vertiv's VRA6025/VRA6026 PDU/cable management brackets are purpose-built accessories for the same rack family.
Frequently Asked Questions
Q: What rack is the VRA6030 compatible with?
A: The VRA6030 is confirmed compatible with the Vertiv VR3305 rack enclosure. It is designed for the Vertiv VR open-frame rack family in 45U x 1200mm configurations.
Q: What is the difference between the VRA6030 and VRA6029?
A: Both are pass-through side panels for 45U racks. The VRA6030 is sized for 1200mm-depth frames; the VRA6029 is for 1100mm-depth frames. Match the panel depth to your rack's actual depth dimension.
Q: What is the difference between the VRA6030 and VRA6032?
A: The VRA6030 is for 45U x 1200mm racks. The VRA6032 covers 48U x 1200mm. Height must match your chassis — do not substitute across U-heights.
Q: Are solid side panels available for the same rack family?
A: Yes. The Vertiv VR accessory line includes split side panels (VRA6009–VRA6012) as an alternative configuration. The pass-through design of the VRA6030 differs from split panels in airflow and cable access characteristics.
Q: Does the VRA6030 require additional mounting hardware?
A: The VRA6030 is designed to mount directly to compatible VR rack frames. No separate adapter hardware is specified in available product documentation for standard installations on the VR3305 chassis.
The VRA6030 is one of those parts that gets overlooked during rack planning and then causes a last-minute scramble on installation day. It's a pass-through side panel for 45U x 1200mm Vertiv VR frames — the 1200mm depth spec is the critical dimension here, and it's easy to order the wrong variant if you're working from a generic rack BOM rather than the actual chassis model number.
Technical Highlights:
- Pass-Through Construction: Allows airflow and cable routing through the panel surface — a meaningful difference from solid panels in hot-aisle/cold-aisle builds where side airflow is intentional, not incidental.
- 45U x 1200mm Sizing: Precisely dimensioned for this chassis height and depth combination. The VR accessory family covers 42U, 45U, and 48U heights across 1100mm and 1200mm depths — six permutations for side panels alone, so the fit is specific, not approximate.
- VR Rack Family Integration: Designed to install directly on VR3305-compatible frames alongside other VRA accessories — top panels, bottom panels, cable management brackets — without mixed-fitment issues when sourced from the same accessory series.
Deployment Considerations:
- Confirm your chassis depth before ordering: the 1100mm version (VRA6029) and 1200mm version (VRA6030) are not interchangeable. A 25mm depth mismatch leaves a visible gap at the rear rail that won't close without the correct panel.
- If you're enclosing an entire rack bay — sides, top, and bottom — plan the full VRA accessory set together. Sourcing panels in separate orders from different SKU revisions can introduce minor fitment variances at panel junctions.
The VRA6030 is the right specification for data center integrators closing out 45U x 1200mm VR rack builds where managed airflow and clean cable access through the side plane are part of the design intent — not an afterthought.
