Geovision 88-SN8ADR47-2TB NVR Package with 2TB Storage
Overview
The 88-SN8ADR47-2TB is a preconfigured package built around the GV-SNVR0812 standalone 8-channel network video recorder. This is a complete out-of-box solution: the NVR arrives with 2TB internal storage already installed, eliminating the need for separate drive procurement and installation. Deploy this unit when you need a single recorder to handle up to 8 IP cameras on a modest footprint without managing external storage arrays or complex scaling.
Compatibility
The GV-SNVR0812 accepts any IP camera that adheres to standard ONVIF protocols or integrates directly with Geovision camera families. The unit's built-in PoE+ ports (IEEE 802.3at) supply network and power simultaneously to compatible IP PTZ and fixed cameras—eliminating the need for separate PoE switches on smaller deployments. Six camera slots are pre-assigned in this package variant; the remaining two channels are available for future expansion or auxiliary feeds. Check the camera's power draw against the per-port PoE+ budget (802.3at maximum ~30W per port, with total NVR capacity constraints) before assigning cameras that exceed individual port limits.
Installation Notes
The 2TB drive is factory-installed; no additional storage setup is required. Mount the unit in a secure rack or shelf location with adequate airflow. Connect cameras to the assigned PoE+ ports and configure recording schedules and retention policies through the unit's local management interface or remote access (if enabled). Verify network connectivity to each camera before finalizing configuration. The unit records directly to its internal drive—confirm storage capacity aligns with your retention window (2TB capacity, recording bit rate, and compression codec all affect actual footage duration).
What's in the Box
- 1x GV-SNVR0812 recorder with 2TB internal hard drive pre-installed
- Power cord and connection documentation as supplied by manufacturer
