Panduit F92RPU2U2ONM019 Opti-Core OS2 Single Mode Fiber Patch Cord
The Panduit F92RPU2U2ONM019 is a 19-meter (62.33 ft) OS2 single mode fiber optic patch cord engineered for low-loss, high-density data center and enterprise network deployments. Part of Panduit's Opti-Core® line, this duplex LC uniboot patch cord features APC (angled physical contact) connectors on both ends, optimized insertion loss performance, and plenum-rated OFNP jacketing for in-ceiling and plenum airspace installations. The yellow jacket provides instant OS2 single mode identification per TIA-598-D color coding standards. Designed for 10G, 40G, 100G, and beyond applications, this patch cord delivers the precision termination and mechanical stability required for mission-critical fiber links in telecommunications rooms, main distribution areas, horizontal cross-connects, and equipment distribution zones.
Key Features
- 19-meter (62.33 ft) OS2 single mode fiber with 9-micron core diameter for long-reach, high-bandwidth applications up to 100G and beyond
- LC Duplex Uniboot APC connectors on both ends with pull-boot design for rapid polarity reversal without re-termination
- Optimized insertion loss performance engineered to minimize signal attenuation and maximize link budget in structured cabling systems
- Plenum-rated OFNP jacket meets NEC Article 770 requirements for installation in air-handling spaces and above drop ceilings
- Yellow jacket for instant OS2 single mode visual identification per TIA-598-D fiber optic cable color coding standard
- Duplex 2-fiber configuration supports bidirectional communication over a single cable assembly
- Factory-terminated and tested to ISO/IEC 11801, TIA/EIA-568-C.3, TIA-604-3 (FOCIS-3), and TIA-604-10 (FOCIS-10) standards
- RoHS compliant construction meets EU Directive 2002/95/EC for reduced environmental impact
- Opti-Core® sub-brand designation indicates Panduit's premium fiber optic interconnect line with rigorous quality control
The LC Duplex Uniboot connector design is a key differentiator for high-density environments. Traditional duplex LC patch cords use two separate 1.25mm ferrules housed in a dual-boot connector body, consuming valuable panel real estate and creating cable management challenges in crowded racks. Panduit's uniboot architecture consolidates both fibers into a single compact boot with an integrated pull-tab mechanism. Installers can reverse polarity in seconds by pulling the tab to release the connector clip, rotating the ferrule holder 180 degrees, and re-seating — no tools, no re-termination, no downtime. This is critical when deploying 40GBASE-SR4 or 100GBASE-SR4 parallel optics that require specific transmit/receive fiber mapping, or when migrating from Method A to Method B polarity schemes during infrastructure upgrades. The APC (8-degree angled) end-face geometry further reduces back reflection to below -60 dB, essential for high-power laser sources in DWDM, CWDM, and long-haul single mode applications where Fresnel reflection can degrade signal integrity or damage transceivers. Standard PC (physical contact) connectors exhibit -40 dB return loss; APC's angled interface directs reflected light into the cladding rather than back toward the source, making this patch cord suitable for analog video transmission, RF-over-fiber links, and sensitive test equipment connections where reflection-induced noise is unacceptable.
This 19-meter length is strategically sized for intra-rack and inter-rack connections in enterprise data centers and telecommunications central offices. It provides enough reach to span adjacent rows in hot-aisle/cold-aisle layouts, connect top-of-rack switches to end-of-row aggregation switches, or link equipment racks to centralized fiber distribution panels without excessive slack that creates cable management problems. The plenum OFNP rating is mandatory for installations in return-air plenums per NEC 770.113(A), where low-smoke, low-flame-spread jacketing is required to meet fire safety codes. Panduit's OFNP jacket uses a fluoropolymer compound that self-extinguishes and produces minimal smoke particulates during combustion, satisfying NFPA 262 (UL 910) flame test requirements enforced by building inspectors and local AHJs (authorities having jurisdiction). This eliminates the need for conduit in plenum spaces, reducing installation labor and material costs compared to riser-rated (OFNR) or general-purpose (OFN) cables that require metallic or non-metallic raceway protection. For integrators working on LEED-certified or other green building projects, the RoHS-compliant construction avoids restricted substances like lead, mercury, cadmium, and hexavalent chromium, supporting LEED Materials and Resources credits and corporate sustainability commitments.
Panduit factory-terminates and tests every Opti-Core patch cord to insertion loss, return loss, and geometric specifications defined in TIA-568-C.3 and ISO/IEC 11801 standards, with full traceability documentation available for mission-critical installations requiring as-built records and compliance verification. The 9-micron core OS2 fiber supports 10GBASE-LR (10 km), 40GBASE-LR4 (10 km), 100GBASE-LR4 (10 km), and extended-reach variants up to 40 km with appropriate optics, making this patch cord a future-proof investment for multi-generational network upgrades. Installation is straightforward: verify connector end-faces are clean using a fiber microscope (dirt is the number one cause of fiber link failure), insert into LC duplex receptacles on transceivers or patch panels until the latch clicks, and verify link light indication. The pull-boot design simplifies moves, adds, and changes — grip the boot (not the cable jacket), pull the latch tab, and extract without damaging the ferrule or stressing the fiber. This patch cord ships individually packaged with protective dust caps on both connectors; carton quantity is 10 units for volume purchases. For data center managers and enterprise network architects standardizing on Panduit's Opti-Core ecosystem, this patch cord integrates seamlessly with Panduit's FHD and FAP cassette modules, LC quad adapter panels, and modular fiber distribution frames, ensuring end-to-end performance and simplified procurement across structured cabling infrastructure projects.
