Panduit F92RLU2U2ONM012 OS2 LC Uniboot Patch Cord 12m

Panduit F92RLU2U2ONM012 Opti-Core OS2 LC Duplex Uniboot Fiber Patch Cord

The Panduit F92RLU2U2ONM012 is a 12-meter OS2 single-mode fiber patch cord engineered for high-density datacenter and enterprise network deployments. Built on the Opti-Core platform, this duplex jumper features LC APC uniboot connectors with pull-boot strain relief, a 2.0 mm LSZH jacket, and factory-optimized insertion loss to ensure consistent link performance in 10G, 40G, and 100G optical infrastructures. The uniboot form factor reduces cable management complexity and conserves panel real estate in congested racks, while the angled physical contact (APC) polish minimizes back reflection for applications sensitive to return loss.

Key Features

• OS2 9/125 µm single-mode fiber rated for distances up to 10 km at 10 Gb/s and 40 km at 1 Gb/s
• LC APC duplex connectors in space-saving uniboot configuration with integrated pull-boot for strain relief
• Factory-polished APC (8° angle) end faces deliver <0.12 dB insertion loss and >60 dB return loss typical
• LSZH (Low Smoke Zero Halogen) jacket meets IEC 60332-3C and UL 1666 plenum flame ratings for enclosed pathway installations
• 2.0 mm round cable diameter simplifies routing through high-density horizontal managers and vertical cable trays
• 12-meter length suits intra-rack cross-connects, adjacent-row interconnects, and mid-span distribution in equipment rooms
• Yellow jacket color follows TIA-598-D convention for OS2 single-mode identification in mixed-fiber plants
• RoHS 2 compliant and exceeds TIA-568-C.3, ISO/IEC 11801, and FOCIS-3/10 mechanical and optical specifications

Single-mode OS2 fiber is the mandatory medium for reaching beyond 300 meters or sustaining 10GBASE-LR, 40GBASE-LR4, and 100GBASE-LR4 optics without modal dispersion penalties. The F92RLU2U2ONM012's 9 µm core supports wavelengths from 1310 nm to 1550 nm, making it compatible with CWDM and DWDM mux/demux schemes in campus backbone and metro-edge handoffs. APC polish reduces Fresnel reflection to below -65 dB, a requirement for OTDR troubleshooting accuracy and analog video transmission over fiber. Installers working under TIA-942 datacenter standards will appreciate the factory-terminated, pre-tested construction—每 jumper ships with test data traceable to ISO 17025 calibration, eliminating field polishing risk and cutting turn-up time on high-port-count switch fabrics.

The uniboot connector housing consolidates both fibers into a single compact boot, reducing the installed footprint by roughly 40 percent compared to traditional duplex LC assemblies with individual 1.6 mm legs. This design proves critical in 1U/2U switch installations where 48+ duplex ports create congestion at the faceplate; the narrower profile permits tighter bend radii around vertical fingers and leaves clearance for airflow in hot-aisle configurations. Pull-boots are molded from thermoplastic elastomer and color-coded to the jacket, giving technicians a positive grip point during MACs without stressing the ferrule or fiber. For deployments mixing OM3/OM4 multimode and OS2 single-mode links, the yellow LSZH jacket provides instant visual differentiation under dim lighting or in overhead ladder-rack runs where cable labels are obscured.

LSZH compounding meets the UL 1666 riser plenum test and IEC 60332-3 Category C bundle burn, certifying the cord for installation in HVAC plenums, vertical risers, and enclosed cable trays without conduit. Halogen-free formulation releases less than 0.5 percent HCl by mass during combustion, reducing corrosive gas exposure to sensitive electronics in co-located equipment and lowering life-safety liability in occupied spaces. This jumper is factory-built under ISO 9001 process controls and ships in cartons of ten, individually bagged with dust caps installed on both connectors. Compliance documentation covering RoHS 2 (2011/65/EU as amended by 2015/863), TIA-568-C.3 Category B performance, and REACH SVHC declarations is included in each carton for integration into project submittals and O&M manuals.