Middle Atlantic ORI 9/16 Dynamic Slope 2 Silver Gray - AUO22DS2G2SLG

Middle Atlantic AUO22DS2G2SLG ORI Acoustic Ceiling Tile Dynamic Slope 2

Overview

The Middle Atlantic AUO22DS2G2SLG is a 2’ x 2’ ORI acoustic ceiling tile designed for commercial AV and technology environments where both aesthetics and acoustic performance matter. Built from 100% polyester PET felt in Silver Gray, the Dynamic Slope 2 profile integrates cleanly into standard 9/16” lay-in grid systems — the grid type found in the overwhelming majority of commercial drop ceilings. If you are specifying a technology room, conference space, or AV-equipped workspace and need a ceiling tile that installs without modification to the existing grid, this is the model to evaluate.

Key Features

• 2’ x 2’ Ceiling Tile Format (60.33 x 60.33 cm): Matches the dominant commercial ceiling grid module, so there is no cutting or custom framing required on standard installations. Swap out existing tiles without touching the grid structure.
• 9/16” Lay-In Mounting Method: Designed specifically for the 9/16” T-bar grid standard — the most common exposed-grid ceiling system in North American commercial construction. Confirm your grid flange width before ordering; 15/16” grids require a different tile variant.
• Dynamic Slope 2 Profile: The angled surface geometry of the Dynamic Slope 2 redirects and diffuses sound rather than allowing flat parallel reflections to build up. In AV rooms and conference spaces, this translates to reduced echo and more intelligible speech reinforcement without added acoustic panel real estate on walls.
• PET Felt Material — 100% Polyester: PET felt is inherently resistant to sagging and moisture-related deformation that affects mineral fiber tiles in high-humidity environments like server rooms with variable HVAC cycling. The material also avoids the fiber shedding associated with some legacy mineral fiber products — a consideration in clean technology environments.
• Silver Gray Color: Neutral finish integrates with standard commercial interiors without requiring a custom paint specification. Consistent color across the tile surface means no visible patching lines when tiles are replaced individually.
• 2-Inch Profile Height: At 2 in (5.1 cm) depth, the AUO22DS2G2SLG sits within the standard plenum envelope and does not require additional clearance above the grid. Verify your plenum depth if routing cable trays or conduit directly above the grid plane.

Integration & Compatibility

The AUO22DS2G2SLG is engineered for the 9/16” exposed T-bar lay-in grid system. It is part of Middle Atlantic’s Middle Atlantic ORI acoustic ceiling tile line, which spans multiple profiles and finishes for coordinated multi-room deployments. For AV infrastructure planning alongside ceiling solutions, review AV furniture and rack systems compatible with commercial ceiling environments. If you are integrating network or IP camera infrastructure above or within the ceiling plane, confirm that tile removal access is preserved for future cable management. Pair with PoE network switches and structured cabling planned during the ceiling rough-in phase to avoid disruptive tile removal post-installation.

Frequently Asked Questions

Q: What ceiling grid type does the AUO22DS2G2SLG fit?

A: The AUO22DS2G2SLG uses a 9/16” lay-in mounting method, designed for standard 9/16” exposed T-bar drop ceiling grids. It is not designed for 15/16” grid systems.

Q: What are the tile dimensions?

A: The tile measures 2’ x 2’ (60.33 x 60.33 cm) with a 2-inch (5.1 cm) profile height.

Q: What material is the AUO22DS2G2SLG made from?

A: It is constructed from PET felt — 100% polyester — which resists sagging and moisture deformation common in mineral fiber tiles.

Q: What color is the AUO22DS2G2SLG?

A: Silver Gray. This is a neutral commercial finish that blends with standard suspended ceiling environments.

Q: What does the Dynamic Slope 2 profile mean for acoustic performance?

A: The angled surface geometry diffuses sound reflections, reducing echo and flutter in AV and conference room environments compared to flat-panel tiles.

Eden Phillips

When specifying the AUO22DS2G2SLG for a technology room buildout, the detail that drives the install decision is the 9/16” lay-in mounting method — that single spec determines whether this tile drops into your existing grid with zero modification or requires a grid swap. Confirm flange width before the tile ships, not after.

Technical Highlights:

• Dynamic Slope 2 Profile: The angled geometry actively diffuses parallel sound reflections — in a 2’ x 2’ module, that surface treatment meaningfully reduces flutter echo in small-to-mid conference rooms without requiring wall-mounted acoustic panels.
• PET Felt Construction: 100% polyester resists the fiber shedding and moisture sag that sideline mineral fiber tiles in rooms with variable HVAC cycling — relevant for any technology space with active cooling loads.
• 2-in Profile (5.1 cm): Stays within standard plenum clearance envelopes. No additional grid drop or custom framing needed, which keeps the ceiling rough-in on schedule.

Deployment Considerations:

• The 9/16” lay-in spec is non-negotiable — if the existing grid is 15/16” flange, this tile will not seat correctly. Field-verify before ordering on a retrofit project.
• Plan cable access routes above the grid before final tile installation; the PET felt construction is durable but repeated tile removal for cable pulls accelerates edge wear over time.

The AUO22DS2G2SLG is the right specification for AV integrators finishing a dedicated conference or huddle room on a standard 9/16” grid, where the Silver Gray finish needs to coordinate with existing commercial interiors and the Dynamic Slope 2 profile delivers acoustic diffusion without a separate wall treatment budget line.