Middle Atlantic AUO22DS2G1SLG ORI Acoustic Ceiling Tile Dynamic Slope 2 Silver Gray
The Middle Atlantic AUO22DS2G1SLG is a 2' x 2' acoustic ceiling tile from the ORI line, designed for 15/16" standard layin grid systems in conference rooms, AV equipment rooms, and commercial office environments where sound management and finished aesthetics both matter. The Dynamic Slope 2 profile gives it a contoured surface that scatters sound differently than a flat tile — useful when you need acoustic treatment without drawing attention to it.
Overview
The Middle Atlantic ORI series targets integrators fitting out rack rooms, huddle spaces, and presentation environments where ceiling treatment is part of the overall system design. This tile installs into the same 15/16" T-bar grid that covers most commercial drop-ceiling infrastructure, so there is no custom hardware or adapter needed — it drops in where a standard 2' x 2' tile sits today. The Silver Gray colorway is neutral enough to disappear into most ceiling grids without a visible color break.
Key Features
- 15/16" Layin Grid Compatibility: Fits the most common commercial drop-ceiling standard without adapters or modifications — swap out an existing tile and you are done. No special brackets, no field cutting required in standard 2' x 2' bays.
- Dynamic Slope 2 Profile: The angled surface geometry is not decorative — it redirects sound energy rather than absorbing it flat-on, which matters in rooms where flutter echo between parallel walls is the primary complaint. It also provides visual depth that distinguishes this from a plain acoustic tile.
- PET Felt Construction (100% Polyester): PET felt is durable, dimensionally stable, and carries no fiberglass concerns — relevant when installers are working overhead without respirators and when the room will be occupied by personnel sensitive to airborne particulates. The material holds its shape over time without sagging or surface delamination common in low-grade mineral fiber tiles.
- 2' x 2' Format (60.33 x 60.33 cm): Matches the standard commercial grid module. A single tile covers 4 sq ft; plan your ceiling map accordingly before ordering quantity. Mixing with standard tiles in the same grid is straightforward.
- 2-Inch Profile Height: At 2 in (5.1 cm) above the grid plane, the Dynamic Slope 2 profile stays within typical plenum clearance without conflicting with lighting fixtures or HVAC diffusers — but verify your plenum depth before ordering if the space is constrained.
- Silver Gray Color: A neutral mid-tone that reads as white or light gray under most commercial lighting. Works with standard white T-bar grid without a color mismatch that draws the eye.
Integration and Compatibility
The AUO22DS2G1SLG installs into any acoustic ceiling tile grid using standard 15/16" layin suspension — the same grid profile found in the vast majority of commercial buildings built since the 1980s. No tools are needed for installation beyond positioning the tile in the grid opening. For larger AV and rack room buildouts, coordinate tile placement with Middle Atlantic rack positioning and cable management layout before finalizing the ceiling grid plan, since cutting tiles to fit around cable drops or vent grilles is difficult with felt material. PET felt can be surface-cleaned but is not rated for wet environments — keep this tile in conditioned, indoor spaces only.
Frequently Asked Questions
Q: What ceiling grid size does the AUO22DS2G1SLG require?
A: The AUO22DS2G1SLG uses a standard 15/16" layin mounting method, which fits the most common commercial drop-ceiling T-bar grid. No adapters or special hardware are needed.
Q: What are the exact tile dimensions?
A: The tile is 2' x 2' (60.33 x 60.33 cm) with a profile height of 2 inches (5.1 cm) above the grid plane.
Q: What material is the AUO22DS2G1SLG made from?
A: It is constructed from PET Felt, which is 100% polyester. This means no fiberglass content — a practical consideration for overhead installation in occupied spaces.
Q: Can this tile be mixed with standard mineral fiber tiles in the same grid?
A: Yes. Since it uses the standard 15/16" layin grid format and 2' x 2' dimensions, it drops into any open bay in an existing commercial ceiling grid alongside standard tiles.
Q: Is the AUO22DS2G1SLG suitable for wet or unconditioned spaces?
A: No. PET felt is designed for conditioned indoor environments. It is not rated for humidity-heavy or wet locations.
Q: What is the profile style of this tile?
A: The profile is Dynamic Slope 2 — a contoured surface geometry that scatters and redirects sound rather than presenting a flat absorption face.
The AUO22DS2G1SLG is the tile I reach for when an integrator needs acoustic treatment in a conference or equipment room without ripping out the existing 15/16" T-bar grid. The Dynamic Slope 2 profile does real acoustic work — the angled face geometry breaks up the flat parallel-surface reflections that make smaller rooms sound like a gymnasium, and it does it without any visible treatment hardware on the walls.
Technical Highlights:
- PET Felt (100% Polyester): No fiberglass means no particulate concern during overhead installation in occupied spaces — a genuine differentiator from mineral fiber tiles when crews are working without respiratory PPE.
- 2-Inch Profile Depth: At 5.1 cm above the grid plane, the Dynamic Slope 2 contour fits within standard plenum clearances, but measure your specific plenum before ordering — HVAC duct runs in tight mechanical ceilings can cut available depth to less than 3 inches.
- Standard 15/16" Layin Format: Direct drop-in to the grid already in the space. No new suspension hardware, no field modifications — the entire install is lift-and-set, which matters on a tight commissioning day.
Deployment Considerations:
- Coordinate tile placement with lighting and diffuser positions before ordering quantity — PET felt is difficult to field-cut cleanly compared to mineral fiber, so plan the grid layout first.
- This tile is indoor/conditioned-space only. Do not spec it for server rooms with cooling systems that generate condensation or for any unconditioned mechanical space.
The AUO22DS2G1SLG is the right pick for conference rooms and AV presentation spaces where the integrator is responsible for the full room experience — acoustics included — and needs a ceiling tile that installs in the existing grid without a separate acoustic subcontract.
