Panduit FWTYL7575LAM077 QuickNet 12-Fiber OM5 Trunk Cable Assembly
The Panduit FWTYL7575LAM077 is a factory-terminated 12-fiber OM5 multimode trunk cable assembly engineered for high-density data center and enterprise backbone applications demanding extended reach and rapid deployment. Spanning 77 meters (252.6 feet), this QuickNet assembly delivers plug-and-play connectivity between IDFs, MDFs, or zone distribution areas without field termination—eliminating fusion splicing downtime and the risk of contamination in live production environments. The OM5 wideband multimode fiber supports 40G/100G short-wave division multiplexing (SWDM) over extended distances, future-proofing infrastructure for emerging data center protocols while maintaining backward compatibility with OM3/OM4 transceiver ecosystems. The lime LSZH jacket provides immediate visual identification in congested pathways and meets plenum fire-safety requirements for under-floor, overhead, and in-wall data center routing.
Key Features
- 12-fiber OM5 wideband multimode for 40GBASE-SR4, 100GBASE-SR4, and SWDM applications up to 100m effective link budget
- 77-meter pre-terminated length suits vertical riser runs, cross-building links, or floor-to-floor backbone distribution in multi-story facilities
- QuickNet factory termination with TIA-604-5 (FOCIS-5) compliant connectors—zero field polishing, sub-0.35dB insertion loss per connector pair
- LSZH (Low Smoke Zero Halogen) jacket rated for plenum air-handling spaces, meeting IEC 60332-3 flame propagation and toxicity standards
- Reduced-diameter trunk design consumes 30-40% less conduit and cable tray volume compared to legacy tight-buffered assemblies, critical for pathway fill-ratio compliance in retrofit installations
- Lime color-coding for instant 50μm multimode identification in mixed single-mode/multimode plants
OM5 wideband multimode fiber represents a generational leap for short-reach data center optics. Unlike OM3 and OM4, which rely on a single 850nm wavelength, OM5 is optimized for short-wave division multiplexing across four distinct wavelengths (850nm, 880nm, 910nm, 940nm). This enables a single fiber pair to carry four parallel 25G channels, delivering 100G aggregate throughput without requiring costly parallel optics or MPO-to-duplex breakout harnesses. For integrators deploying spine-leaf architectures or hyperconverged storage clusters, the FWTYL7575LAM077 provides the physical layer headroom to scale from 10G edge connectivity today to 100G or 400G (via 4x100G breakout) core links tomorrow—all on the same installed fiber plant. The 77-meter length maps directly to TIA-568 permanent link budgets for campus backbone applications: in a typical two-connector channel (building entrance to main cross-connect, or MC to horizontal cross-connect), you retain 1.5dB margin even after accounting for patch-cord insertion loss and connector mating variability.
QuickNet factory termination is Panduit's answer to field-labor cost escalation and the reliability risks of on-site fusion splicing. Each connector is terminated in a controlled cleanroom environment, mechanically polished to sub-50nm surface finish, then tested for insertion loss, return loss, and end-face geometry per TIA-568-C.3 Tier 2 certification requirements. Upon delivery, the assembly is ready for immediate deployment: pull the protective dust caps, insert into MPO or LC adapter panels (depending on connector type; consult factory configuration), and validate link with an OLTS or visual fault locator. No fusion splicer rental, no consumable connector inventory, no technician certification prerequisites. For data center migrations operating under compressed construction windows—particularly when raised-floor cable tray pathways are accessible only during overnight outages—this translates to 15-20 trunk links installed per shift instead of 4-6 field-terminated runs.
The LSZH jacket formulation is non-negotiable for modern data centers operating under NFPA 75, IEC 60332, or equivalent fire-safety codes. Traditional PVC cable jackets release hydrochloric acid and dense smoke when exposed to flame, creating corrosive particulate that can destroy sensitive electronics even in adjacent fire zones. LSZH compounds, by contrast, emit minimal smoke opacity (<60% light transmission in IEC 61034 chamber tests) and contain no halogenated plasticizers, preserving personnel egress visibility and preventing long-term corrosive damage to server racks and optical distribution frames. The lime color follows TIA-598-D cabling color standards for 50μm multimode fiber, providing instant visual differentiation from aqua OM3, violet OM4, or yellow single-mode trunks during troubleshooting or maintenance—a critical safety feature when techs are tracing live links in blacked-out under-floor zones with headlamps.
This assembly ships as a single unit, individually serial-numbered with factory test data (insertion loss per fiber, length certification) either printed on the cable jacket or included as a separate test report. Panduit's manufacturing process ensures compliance with TIA-492-AAAD (OM5 fiber geometry), ISO/IEC 11801 (generic cabling for customer premises), and RoHS material restrictions, meeting both North American and EU procurement requirements for federal, healthcare, and multinational enterprise deployments. The 77-meter length is a non-standard extended-reach option—consult your Panduit account manager or authorized distributor to confirm lead times and minimum-order quantities for project-specific trunk lengths outside the 15m/30m/50m standard catalog SKUs.
