Panduit FWTYL7575KAM074 QuickNet OM5 12-Fiber Trunk Cable Assembly
The Panduit FWTYL7575KAM074 is a factory-terminated 12-fiber OM5 wideband multimode trunk cable assembly designed for high-density data center deployments where space is at a premium and rapid infrastructure rollout is critical. Spanning 74 meters (242.78 feet), this QuickNet trunk eliminates field termination labor while delivering small-diameter construction that consumes 30 to 40 percent less pathway space than conventional trunk cables. Lime LSZH jacketing provides immediate visual identification in crowded cable trays while meeting strict fire-safety requirements for enclosed plenums and equipment rooms. Pre-tested and ready to deploy, this trunk reduces installation time from hours to minutes while ensuring consistent optical performance across all twelve 50-micron fiber cores.
Key Features
- OM5 wideband multimode fiber supports shortwave wavelength-division multiplexing (SWDM) for 4× capacity increase over OM4 on the same fiber count
- 12-fiber configuration balances port density with manageable trunk diameter — ideal for structured cabling backbones between distribution frames
- 74-meter length suits typical floor-to-floor or cross-aisle runs in enterprise data centers and colocation facilities
- Factory-terminated connectors eliminate field splicing, fusion equipment, and per-connector labor cost while guaranteeing insertion loss spec compliance
- Small-diameter trunk construction reduces conduit fill and cable-tray congestion by 30–40% compared to standard jacketed assemblies
- Lime-colored LSZH jacket enables instant visual tracing in multi-system environments and meets IEC 60332-3-24 flame spread + low smoke/zero halogen emission standards
- 50 μm core diameter optimized for 850 nm and 950 nm VCSEL transceivers in 10G/25G/40G/100G Ethernet and 16G/32G Fibre Channel applications
- QuickNet system architecture: part of Panduit's modular rapid-deployment platform for scalable moves, adds, and changes without re-termination
- Pre-tested insertion loss and return loss with included test report — no post-install OTDR certification required for acceptance
- Complies with ISO/IEC 11801, TIA-568-C.3, TIA-492-AAAD (OM5 fiber performance), and RoHS material restrictions
OM5 wideband multimode fiber represents the latest generation of 50 μm laser-optimized multimode technology, extending usable spectrum beyond the 850 nm window employed by OM3 and OM4 fibers. By supporting shortwave wavelength-division multiplexing across four distinct VCSEL wavelengths (850, 880, 910, and 940 nm), OM5 enables 40GBASE-SR4 and 100GBASE-SR4 transmission to reach 150 meters — double the OM4 reach — or allows a single OM5 fiber pair to carry four parallel 25G channels for aggregate 100G throughput without requiring parallel optics. This makes FWTYL7575KAM074 a future-proof backbone choice for data centers planning 400G migration paths or high-density leaf-spine fabrics where transceiver port savings translate directly to capital cost reduction. The 50 μm core also maintains broad compatibility with legacy 1G and 10G SFP/SFP+ optics, so you can deploy this trunk today in mixed-speed environments and activate higher-speed lanes as switch refresh cycles proceed. Factory termination guarantees <0.35 dB insertion loss per mated pair, which preserves link budget margin even on the full 74-meter span when connecting 100GBASE-SR4 optics rated for 70-meter OM4 reach or 100-meter OM5 reach.
High-density data center deployments face two chronic infrastructure constraints: pathway congestion and installation labor cost. Traditional 12-fiber trunk assemblies built with round distribution-style cable can exceed 15 mm outer diameter, forcing oversized cable trays or conduit and blocking airflow in under-floor or overhead pathways. Panduit's small-diameter trunk construction reduces this assembly's profile to approximately 8–10 mm, cutting cross-sectional area by more than half and enabling 30 to 40 percent higher fill ratios in existing EMT, ladder rack, or basket tray. This density gain is critical when retrofitting legacy data centers with 40G/100G backbone upgrades or when building new hyperscale facilities where every square inch of pathway real estate must support dozens of parallel fiber routes. The lime LSZH jacket provides instant visual differentiation from aqua OM3, magenta OM4, or blue single-mode trunks, reducing human error during MACs and emergency troubleshooting. On the labor side, QuickNet factory termination eliminates the four to six hours a field technician would spend stripping, cleaving, fusion-splicing, and testing twelve individual fibers inside breakout kits or patch panels. Instead, the installer simply routes the trunk, secures it per TIA-568 bend-radius guidelines (10× cable diameter minimum), and plugs both ends into LC-duplex adapter panels or cassette modules — reducing a half-day termination task to a fifteen-minute pull-and-plug operation. This labor compression is especially valuable in phased data center builds where structured cabling must be completed ahead of equipment installation deadlines, or in colocation environments where customer handoff speed directly impacts revenue recognition.
The FWTYL7575KAM074 ships with documented test results certifying insertion loss, return loss, and polarity per TIA-568-C.3 and TIA-604-5 (FOCIS-5) connector endface geometry standards. LSZH jacket composition meets IEC 60332-3-24 Category C flame propagation limits and IEC 61034 smoke density <60% light obscuration, making this trunk suitable for installation in NFPA 75-compliant data center spaces, HVAC plenums under IBC Section 602 combustibility rules, and international facilities governed by EN 50575 CPR Class B2ca requirements. This trunk integrates seamlessly with Panduit's QuickNet cassette modules, pre-loaded MTP-to-LC breakout panels, and FiberRunner cable management systems — creating a unified rapid-deployment architecture where trunk cables, patch panels, and horizontal distribution all share the same small-diameter form factor and plug-and-play termination methodology. For integrators managing multi-site data center rollouts or large-scale campus backbone upgrades, this factory-QA approach eliminates the variability and rework risk inherent in field termination while delivering the optical performance and documentation rigor that enterprise SLAs and carrier interconnect contracts demand.
