Panduit FWTYL7575KAM071 QuickNet 12-Fiber OM5 Trunk Cable Assembly
The Panduit FWTYL7575KAM071 is a factory-terminated 12-fiber OM5 trunk cable assembly engineered for high-density data center backbone deployments requiring extended reach and rapid installation. This 71-meter (232.94 ft) pre-terminated trunk features Panduit's QuickNet™ platform, delivering plug-and-play fiber connectivity that eliminates field termination time and error while supporting next-generation 40/100/400 Gigabit Ethernet transmission over wideband multimode fiber. The lime-colored LSZH jacket provides immediate visual identification in dense pathways while meeting strict plenum-equivalent fire safety requirements for mission-critical facilities.
Key Features
- OM5 wideband multimode fiber optimized for short-wave wavelength division multiplexing (SWDM) supporting 40/100/400GbE over extended distances
- 12-fiber trunk configuration with factory-terminated connectors ensures consistent insertion loss and eliminates field termination defects
- 71-meter extended reach bridges typical data center cross-connect to equipment distribution area (EDA) runs without mid-span splice points
- Small-diameter trunk design reduces pathway fill by 30-40% compared to traditional 12-strand assemblies, critical for high-density horizontal cable management
- LSZH (Low Smoke Zero Halogen) flammability rating meets IEC 60332-3-24 plenum-equivalent requirements for occupied spaces and international data center standards
- Lime jacket color provides instant visual differentiation from legacy OM3/OM4 infrastructure during migration projects
- QuickNet™ pre-terminated platform reduces installation labor by up to 80% versus field-terminated splice-on connectors
- 50-micron fiber core diameter maintains backward compatibility with installed OM3/OM4 active equipment while future-proofing for SWDM optics
- Factory testing and certification guarantees insertion loss, return loss, and polarity compliance out of the box
- RoHS compliant construction supports green building certification and IT asset disposal regulations
OM5 fiber represents the latest evolution in multimode technology, specifically designed to support short-wave wavelength division multiplexing (SWDM) transmission that enables 40GBASE-SR4, 100GBASE-SR4, and emerging 400GBASE-SR8 applications over a single duplex or small-count fiber pair. Unlike OM3 and OM4 which were optimized for single-wavelength 850nm transmission, OM5's wider effective modal bandwidth (EMB) across the 850nm-950nm spectrum allows SWDM transceivers to multiplex four distinct wavelengths over each fiber, quadrupling effective capacity without increasing fiber count. For this 12-fiber trunk, that means supporting up to six 100GbE links or three 400GbE links in a cable assembly that occupies the same conduit space as traditional 24-fiber OM3 trunks. The small-diameter construction uses reduced-diameter buffer tubes and tight-buffered fiber management that cuts cross-sectional area by 30-40%, a critical advantage when retrofitting legacy data centers with fixed 4-inch cable tray capacity or when maximizing airflow in hot-aisle containment systems where every cubic inch of obstruction impacts cooling efficiency. The LSZH jacket compound meets IEC 60754-1 halogen content limits and IEC 61034 smoke density requirements, producing less than 0.5% hydrogen chloride during combustion—essential for protecting sensitive IT equipment during fire events and mandatory for deployments in European Union facilities, healthcare data centers, and any installation subject to ASHRAE TC 9.9 gaseous contamination guidelines.
Panduit's QuickNet™ platform delivers trunk cables as fully tested, factory-terminated assemblies with connectors installed in a controlled manufacturing environment using automated polishing and inspection systems that guarantee <0.3dB insertion loss per connection point. This eliminates the three most common field termination failures: fiber end-face contamination from improper cleaning, core misalignment from hand-polishing angle variation, and incorrect fiber-to-ferrule epoxy adhesion that degrades over thermal cycling. Each 12-fiber trunk ships with serialized test reports documenting insertion loss and return loss for every fiber pair, providing as-built documentation for TIA-568 compliance verification and future troubleshooting. The 71-meter length is specifically sized for typical data center main distribution area (MDA) to equipment distribution area (EDA) runs in raised-floor environments, where the horizontal distance from core switch to end-of-row aggregation switch averages 55-65 meters and the vertical cable drop through overhead ladder rack, plenum space, and floor penetration adds 10-15 meters of slack requirement. Pre-terminated trunks eliminate the need for fusion splice enclosures or field-installable connectors at the remote end, reducing mean time to deploy from 45 minutes per 12-fiber termination (field splice) to under 5 minutes (plug and verify), a labor savings that pays for the trunk premium after just two installations at typical integration labor rates. The lime jacket color follows TIA-598-D color coding recommendations for OM5 fiber, allowing instant visual identification during MAC (move/add/change) operations and preventing accidental cross-connection with legacy OM3 (aqua) or OM4 (magenta) infrastructure that may not support SWDM wavelength requirements.
This trunk assembly meets or exceeds TIA-568-C.3 Category OM5 performance requirements for 3,500 MHz·km effective modal bandwidth at 850nm and 1,850 MHz·km at 950nm, supporting 40GBASE-SR4 to 150 meters, 100GBASE-SR4 to 150 meters, and 400GBASE-SR8 to 100 meters per TIA transceiver reach specifications. ISO/IEC 11801 Class OM5 compliance ensures interoperability with international cabling standards for enterprise data centers operating under non-US building codes. TIA-604-5 (FOCIS-5) ferrule geometry compliance guarantees physical-contact mating with standard LC, SC, or MPO connector interfaces. For integrators designing spine-leaf architectures, aggregated 10GbE server uplinks, or storage area network (SAN) fabrics in financial services, healthcare PACS, or cloud colocation facilities, this 12-fiber trunk provides the verified reach, density, and deployment speed to meet aggressive build schedules while future-proofing for 100GbE/400GbE migration without re-cabling the physical layer.
