Panduit FW2ERQ1Q1SNM015 OM5 15m LC Duplex Fiber Patch Cord

Panduit FW2ERQ1Q1SNM015 Opti-Core OM5 LC Duplex Fiber Patch Cord

The Panduit FW2ERQ1Q1SNM015 is a 15-meter OM5 wideband multi-mode fiber optic patch cord engineered for 40GBASE-SR4 and 100GBASE-SR4 datacenter deployments. Factory-terminated with LC duplex push-pull connectors on both ends, this cable delivers four times the effective bandwidth of OM4 fiber through shortwave wavelength-division multiplexing (SWDM), supporting 40 Gb/s to 100 meters and 100 Gb/s to 150 meters over a single duplex pair. The 2 mm riser-rated OFNR jacket in lime green provides compliant plenum-alternative routing and immediate visual circuit identification in high-density patching environments.

Key Features

• OM5 wideband multi-mode fiber optimized for 850 nm VCSELs with extended SWDM wavelength support (850/880/910/940 nm)
• 15-meter (49.2 ft) length suits cross-rack and intra-row datacenter spine-leaf connections
• LC duplex push-pull connectors enable tool-free insertion and extraction in dense SFP+ / QSFP+ arrays
• 50/125 µm core/cladding diameter maintains backward compatibility with OM3 and OM4 infrastructures
• Riser-rated OFNR jacket meets IEC 60332-1-2 flame propagation requirements for vertical cable runs
• Lime green jacket color-coding aligns with TIA-598-D OM5 identification standards
• Duplex 2 mm cable diameter reduces pathway congestion compared to breakout assemblies
• Factory-terminated and tested to eliminate field polishing variables and insertion loss uncertainty

OM5 fiber represents the fifth generation of laser-optimized multi-mode standards, purpose-built for shortwave wavelength-division multiplexing that quadruples effective bandwidth without additional fiber strands. While OM3 and OM4 operate exclusively at 850 nm, OM5's extended modal bandwidth across four SWDM wavelengths (850/880/910/940 nm) allows a single duplex LC pair to aggregate four parallel 25 Gb/s channels into 100GBASE-SR4 transmission. At 15 meters, this patch cord fits the typical distance between adjacent racks or between end-of-row aggregation switches and spine layer equipment in leaf-spine topologies. The 50-micron core diameter maintains full interoperability with installed OM3 and OM4 links—10GBASE-SR, 40GBASE-SR4, and earlier standards operate without modification, while 100GBASE-SR4 optics unlock the SWDM advantage when both ends terminate in OM5. This backward compatibility protects existing multi-mode investments during phased 100G upgrades, allowing mixed-generation patching until the entire channel qualifies for OM5 reach specifications.

Datacenter and enterprise SAN installations demand patch cords that survive frequent reconnects without performance degradation. The LC duplex push-pull connector body provides positive latching that resists accidental disconnection from vibration or cable-management tension, while the push-pull release mechanism allows single-handed extraction in equipment aisles where technicians work from ladders or in confined overhead pathways. The 2 mm duplex cable diameter minimizes bundle cross-section in vertical managers and horizontal cable trays compared to individual simplex cords or breakout harnesses, reducing airflow obstruction in hot-aisle containment designs. Lime green jacketing follows TIA-598-D color convention for OM5 fiber, providing immediate visual differentiation from aqua OM3, eero OM4, and legacy orange OM1/OM2 circuits during troubleshooting or MAC operations. The riser-rated OFNR jacket qualifies for vertical risers and general building spaces under NEC Article 770, offering a cost-effective alternative to plenum-rated OFNP cable in non-plenum pathways while still meeting IEC 60332-1-2 flame-propagation limits that prevent floor-to-floor fire spread.

Factory-terminated patch cords eliminate the variability inherent in field terminations—epoxy cure times, cleave angles, and polish geometry remain tightly controlled in Panduit's manufacturing process, ensuring insertion loss stays within 0.35 dB typical and return loss exceeds 20 dB across the operational wavelength range. For integrators deploying 40GBASE-SR4 storage fabrics or preparing infrastructure for 100GBASE-SR4 server uplinks, this 15-meter OM5 assembly provides the reach and performance headroom required by IEEE 802.3bm and 802.3cd physical-layer specifications. The cable ships in cartons of 10, streamlining bulk orders for new builds or refresh projects where consistent length and connector orientation reduce on-site labor and pathway planning complexity.