Panduit FW2RPU1U1NNM015 15m OM5 LC Uniboot Patch Cord

Panduit FW2RPU1U1NNM015 Opti-Core OM5 Fiber Patch Cord

The Panduit FW2RPU1U1NNM015 is a 15-meter OM5 multimode fiber optic patch cord engineered for high-density datacenter interconnects, IP camera backbone installations, and AV-over-fiber deployments requiring future-proof bandwidth. Built on Panduit's Opti-Core platform, this duplex jumper features LC uniboot connectors with UPC polish on both ends, plenum-rated OFNP jacketing for in-ceiling runs, and the lime green jacket that identifies OM5 fiber per TIA-598 standards. At 49 feet, this length bridges equipment racks to intermediate distribution frames, connects remote NVR arrays to core switches, or spans studio control rooms to equipment closets—applications where Cat6A falls short and OM3/OM4 may bottleneck future 100G or 400G upgrades. The uniboot form factor saves 50% of patch-panel port space versus traditional duplex LC connectors and allows toolless polarity reversal in the field, critical when troubleshooting bidirectional 40G/100G optics or correcting Tx/Rx mismatches without re-termination.

Key Features

• OM5 wideband multimode fiber supports 100GBASE-SR4 to 150m and 40GBASE-SR4 to 440m, backward-compatible with OM3/OM4 optics
• LC duplex uniboot connectors reduce patch-panel footprint by 50% and enable toolless polarity flip without re-termination
• Plenum OFNP jacket rated for air-handling spaces per NEC 770.113, UL 1666 vertical flame test, and IEC 60332-1-2
• 15-meter (49.2 ft) length ideal for rack-to-IDF, NVR-to-core-switch, or cross-room AV backbone installations
• Lime green TIA-598 color coding provides instant visual identification of OM5 infrastructure in mixed-fiber plants
• UPC polish on both connectors delivers <0.35 dB insertion loss typical and >50 dB return loss for 10G/25G/40G/100G links
• 50-micron graded-index core optimized for 850nm VCSEL transceivers in IP surveillance, SAN, and spine-leaf topologies

OM5 Wideband Advantage: Unlike OM3 (300m at 10G) or OM4 (400m at 10G), OM5 fiber uses short-wave wavelength-division multiplexing (SWDM) to push four 25G lanes over a single duplex pair, enabling 100GBASE-SR4 to 150 meters or 40GBASE-SR4 to 440 meters with BiDi optics. For integrators designing IP camera networks with centralized NVR arrays or AV installations migrating to 25G/100G Dante AV, OM5 eliminates the need for parallel OM4 trunks or expensive singlemode infrastructure. The Panduit FW2RPU1U1NNM015's 50-micron core remains fully backward-compatible with installed OM3/OM4 SFP+ and QSFP28 transceivers, so you can deploy today's 10G camera uplinks and scale to 25G/100G without re-cabling. The lime green jacket per TIA-598 instantly distinguishes OM5 from aqua OM3/OM4 or orange OM1/OM2, reducing mis-patch risk during maintenance and ensuring techs pull the correct fiber when troubleshooting latency or bit-error issues in a congested datacenter or head-end.

LC Uniboot Design & Plenum Rating: Traditional duplex LC patch cords consume two ports and require separate retention clips, wasting panel real estate and complicating polarity management when Tx and Rx pairs are swapped. The FW2RPU1U1NNM015's uniboot design consolidates both fibers into a single compact housing with a toolless polarity-reversal mechanism—flip the key tab, and the internal crossover rotates 180°, swapping A-to-B without unplugging or re-terminating. This matters in 40G/100G bidirectional links where parallel optics expect a specific lane mapping, or when troubleshooting why an SFP+ link won't train and you need to test both polarity states in seconds rather than hours. At 15 meters, this cord fits rack-to-IDF or cross-room runs where plenum rating is non-negotiable: the OFNP jacket passes UL 1666 vertical flame and IEC 60332-1-2 requirements, so you can route it through drop ceilings, HVAC plenums, or raised floors without conduit, keeping inspectors happy and avoiding costly rework. For IP surveillance integrators pulling fiber from a head-end rack to a remote camera aggregation switch mounted above a suspended ceiling, or AV techs linking a control room to a Dante AV core in an adjacent equipment closet, plenum compliance is the difference between a one-day install and a failed inspection.

15-Meter Length & Deployment Context: At 49 feet, the FW2RPU1U1NNM015 targets medium-distance horizontal runs—longer than the 1-3m jumpers used inside a single rack but shorter than the 30-100m campus backbone cables between buildings. Common applications include connecting a top-of-rack camera aggregation switch to a core NVR in the same server room (typical datacenter row spacing is 25-50 feet), linking a Dante AV matrix to outboard amplifiers or DSP racks across a broadcast studio, or running fiber from a central UPS-backed IDF to a remote access control panel in a warehouse. The 2mm duplex cable diameter keeps bend radius manageable in tight overhead pathways—critical when snaking fiber through crowded cable trays alongside copper and coax—and the lime jacket's high visibility simplifies tracing during troubleshooting. Panduit ships this in single units (package quantity 1, carton quantity 10), so you can order exactly the count needed for a retrofit or stock a box of ten for recurring expansion projects without over-purchasing bulk reels.

The FW2RPU1U1NNM015 ships with UPC polish on both LC connectors, delivering <0.35 dB insertion loss typical and >50 dB return loss per TIA-568.3-D—sufficient for 10GBASE-SR, 25GBASE-SR, and 100GBASE-SR4 links without additional attenuation budgeting or the APC angle polish required for long-haul singlemode. Panduit's Opti-Core manufacturing process pre-cleans and inspects each ferrule end-face, so the cord arrives ready to plug into SFP+, SFP28, or QSFP28 optics without field cleaning (though a quick wipe with a lint-free swab and isopropyl alcohol remains best practice). For integrators who need to document as-built insertion loss for warranty or commissioning reports, the 50-micron OM5 core pairs with any 850nm OTDR or visual fault locator, and the uniboot's key tab position (A/B label molded into the boot) provides a physical reference for polarity verification before powering up bidirectional optics. This cord meets IEC 60332-1-2 flame propagation limits and ships with a Panduit-backed manufacturer warranty, ensuring it performs in spec for the multi-year lifecycle of enterprise surveillance or AV infrastructure.