Panduit FS2RPU1U1NNM012 OM4+ LC Uniboot Patch 12m

Panduit FS2RPU1U1NNM012 Signature Core OM4+ LC Uniboot Fiber Patch Cord

The Panduit FS2RPU1U1NNM012 is a 12-meter OM4+ multimode fiber patch cord engineered for high-density datacenter and enterprise network deployments requiring 40GBASE-SR4 and 100GBASE-SR10 transmission. Built on Panduit's Signature Core platform, this patch cord features LC duplex uniboot connectors on both ends with pull-boot release mechanisms that simplify moves/adds/changes in congested rack environments. The aqua jacket provides instant visual identification of OM4+ fiber paths, while plenum (OFNP) rating ensures code compliance for air-handling spaces. Ultra-low insertion loss spec guarantees margin for longer channel runs and future link-loss degradation.

Key Features

• OM4+ 50-micron multimode fiber with enhanced bandwidth and extended reach over standard OM4
• LC duplex uniboot connectors with pull-tab release for tool-free disconnect in high-density panels
• 12-meter (39.37 ft) length for cross-connect between adjacent racks or intra-row datacenter runs
• Plenum (OFNP) rated jacket meets NEC Article 770 requirements for installation above drop ceilings
• Ultra-low insertion loss specification maximizes link budget for 40G/100G SR applications
• Aqua jacket color follows TIA-598-D coding standard for instant OM4/OM4+ fiber identification
• Pre-terminated and 100% factory tested to TIA-568-C.3 and ISO/IEC 11801 performance criteria
• RoHS compliant construction with tested compatibility across Panduit cassette and panel systems

The FS2RPU1U1NNM012 utilizes Panduit's Signature Core manufacturing process, which maintains tighter geometrical tolerances on core concentricity and ferrule endface geometry than generic multimode patch cords. This translates to insertion loss values consistently below 0.25 dB—critical when deploying 40GBASE-SR4 links that must stay within the 1.5 dB channel loss budget over 150 meters, or 100GBASE-SR10 links operating at the edge of the 1.9 dB budget. The OM4+ fiber itself is optimized for 850nm VCSEL transmission with effective modal bandwidth exceeding 4700 MHz·km, providing additional margin against modal dispersion that can degrade BER performance in parallel-optic 40G/100G transceivers. For integrators planning 25G-per-lane architectures (100GBASE-SR4, 200GBASE-SR4, 400GBASE-SR8), OM4+ spec ensures the installed fiber plant won't become the bottleneck as transceiver technology evolves.

The 50-micron core diameter with laser-optimized graded-index profile supports modal bandwidth specifications that exceed OM4 baseline by approximately 15-20%, which directly affects maximum channel length at higher data rates. In practical terms, this patch cord will support 40GBASE-SR4 out to 150 meters and 100GBASE-SR10 to 150 meters with full IEEE 802.3ba compliance—distances that cover the vast majority of intra-building horizontal and backbone runs without requiring single-mode fiber or costly OM5 wideband multimode. The ultra-low insertion loss target (typically ≤0.20 dB per connector pair) preserves optical power budget for installations with multiple mated pairs in the channel: a typical main-to-horizontal cross-connect using cassettes might have four mated connections (patch cord to cassette, cassette to trunk, trunk to cassette, cassette to patch cord), and every 0.1 dB saved per connection translates to 0.4 dB recovered link margin. That margin becomes critical when accounting for splice loss, connector contamination over time, and temperature-related transceiver power variation.

The LC duplex uniboot form factor reduces patch cord diameter and bend radius compared to traditional dual-simplex LC designs, which directly impacts airflow and cable management in front-of-rack deployments. Each uniboot connector includes a pull-tab that releases the duplex latch without requiring a fingernail or tool—a small detail that saves significant time when an integrator is working through 96-port cassette breakouts or troubleshooting a leaf-spine fabric with hundreds of inter-switch links. The 12-meter length is purposefully sized for typical row-to-row or end-of-row aggregation scenarios in structured datacenter designs; it provides enough slack for proper service loops and strain relief without excess cable bulk that creates clutter or blocks cooling paths. The plenum jacket rating allows this patch cord to run through cable trays above a drop ceiling or within an underfloor plenum without requiring conduit, simplifying installation and reducing material cost on jobs where the AHJ enforces NEC 770.113 strictly.

Installation best practices for the FS2RPU1U1NNM012 follow standard fiber handling protocols: minimum bend radius of 10x cable diameter during installation (approximately 3 inches for this assembly), reducing to 5x diameter for long-term static bends. The uniboot connector body is designed for routing through 1U horizontal cable managers and high-density panel strain-relief bars without snagging or imposing excessive bend stress on the furcation point. When installing into cassette modules (MTP-to-LC breakout), the uniboot form factor allows two patch cords to occupy the space previously required for one dual-simplex pair, effectively doubling usable port density on the front of the rack. For integrators deploying Cisco Nexus, Arista 7000 series, Juniper QFX, or Dell EMC S-series switches with QSFP+ or QSFP28 breakout cables, this patch cord mates cleanly to the LC duplex side of MTP-8 or MTP-12 breakout harnesses without imposing the bend-radius violations that commonly occur when four or eight duplex patch cords converge at a single 40G or 100G port.

The aqua jacket color adheres to TIA-598-D color coding (aqua for OM4 and OM4+ laser-optimized 50-micron fiber), which allows technicians to visually distinguish fiber types in mixed installations where OM3 (aqua with orange alternate) and single-mode OS2 (yellow) may coexist. This color-coding discipline reduces the risk of accidental cross-connection—plugging OM3 into a link budgeted for OM4+ reach, or attempting 10GBASE-LR single-mode transmission over multimode fiber. The plenum (OFNP) jacket is constructed from low-smoke, flame-retardant materials that meet UL 910 (Steiner Tunnel Test) and NFPA 262 requirements, with a maximum flame-spread index and smoke-developed index suitable for installation in spaces used for environmental air circulation per NEC 300.22(C). For integrators working in occupied buildings where fire marshal sign-off is required, plenum rating eliminates the need for metallic conduit or special enclosures in horizontal pathways, cutting installation labor and material cost.

This patch cord ships with full compliance to TIA-568-C.3 (recognized premises cabling standard), ISO/IEC 11801 (international structured cabling), TIA-604-3 (FOCIS-3 SC/LC connector interface), and TIA-604-10 (FOCIS-10 multimode fiber endface geometry). It is factory-terminated and tested for insertion loss, return loss, and endface geometry per IEC 61300-3-35, with test results available on request for jobs requiring as-built documentation or warranty validation. The LC connectors are built with zirconia ceramic ferrules and multi-layer endface polish (physical contact), ensuring return loss better than -20 dB across the 850nm and 1300nm multimode windows. For integrators building out leaf-spine fabrics, SAN extension links, or high-density FEX deployments with standards-compliant transceivers, the FS2RPU1U1NNM012 provides a reliable, field-proven interconnect that supports 10/25/40/100 Gbps Ethernet or 8/16/32 Gbps Fibre Channel without introducing latency jitter, excessive attenuation, or the need for rework after acceptance testing.