Panduit FS2RPU1U1NNM010 OM4+ 10m LC Uniboot Patch Cord

Panduit FS2RPU1U1NNM010 Signature Core OM4+ 10-Meter LC Duplex Uniboot Plenum Fiber Patch Cord

The Panduit FS2RPU1U1NNM010 is a 10-meter (32.81 ft) OM4+ laser-optimized multimode fiber patch cord engineered for 40GBASE-SR4 and 100GBASE-SR4 applications in data centers, telecom rooms, and enterprise network environments. Built on Panduit's Signature Core platform, this aqua-jacketed plenum-rated cable features LC duplex uniboot connectors on both ends, delivering ultra-low insertion loss performance that extends transmission distances beyond standard OM4 specifications. The space-saving uniboot design consolidates two fibers into a single compact connector body with integrated pull-tab boot, simplifying moves-adds-changes in high-density patching environments while maintaining full polarity reversibility without re-termination. Commercial integrators deploying 40G/100G Ethernet, 16G/32G Fibre Channel SANs, or pre-terminated cassette-based structured cabling systems gain factory-precision termination, OFNP plenum compliance for air-handling spaces, and the insertion-loss headroom required for extended-reach links in multi-tier architectures.

Key Features

• OM4+ laser-optimized 50μm multimode fiber exceeds TIA-568-C.3 OM4 specifications for extended 40G/100G reach
• Ultra-low insertion loss (ULIL) design provides additional link budget for longer distances and higher split ratios
• LC duplex uniboot connectors with pull-tab boot enable tool-free polarity reversal in seconds
• OFNP plenum-rated jacket meets NEC Article 770 requirements for installation in air-handling spaces
• Aqua cable jacket and connector boots provide instant visual identification of OM4+ fiber type per TIA-598-D
• Factory-terminated and tested to guarantee insertion loss, return loss, and geometry compliance
• RoHS compliant construction for environmentally responsible deployments
• Meets ISO/IEC 11801, TIA-568-C.3, FOCIS-3, and FOCIS-10 performance standards
• 10-meter length ideal for cross-connects between adjacent racks or intra-row patching
• Signature Core platform ensures consistent mechanical and optical performance across Panduit's fiber ecosystem

OM4+ fiber represents the current state-of-the-art in 50μm laser-optimized multimode technology, offering modal bandwidth performance that exceeds the 4700 MHz·km @ 850nm specification of standard OM4 by a measurable margin. This additional bandwidth translates directly into extended reach for 40GBASE-SR4 (up to 150 meters versus the 100-meter OM4 standard) and 100GBASE-SR4 applications, providing critical headroom when link budgets are tight due to multiple mated pairs, panel-to-panel connections, or the insertion loss contributions of MTP/MPO cassettes in breakout configurations. The ultra-low insertion loss design further enhances this advantage by minimizing connector losses to well below the 0.75 dB maximum specified in TIA-568-C.3, often achieving typical values under 0.15 dB per mated pair. For data center architects planning 40G spine-to-leaf fabrics or 100G storage networks, this performance margin is the difference between a link that operates with comfortable margin and one that fails intermittently under thermal stress or after multiple reconnections.

The uniboot connector design addresses one of the most persistent pain points in high-density fiber patching: port congestion and cable management complexity. Traditional duplex LC patch cords use two separate 1.25mm ferrules housed in a side-by-side duplex clip, resulting in a footprint nearly 13mm wide at the connector. Panduit's uniboot design consolidates both ferrules into a single compact body approximately 6.5mm wide, cutting the required panel space nearly in half and enabling integrators to achieve true 144-fiber density in 1U panels without the jacket-bend-radius violations and tangled spaghetti that plague legacy installations. The integrated pull-tab boot serves a dual purpose: it provides secure grip for insertion and extraction without stressing the ferrules, and it enables tool-free polarity reversal by allowing the internal fiber assembly to rotate 180 degrees within the boot—a critical feature when deploying breakout harnesses from MTP trunk cables, where transmit/receive polarity must be flipped at one end to achieve proper signal flow. Telecom room and equipment distribution area builds benefit immediately, as technicians can correct polarity errors in seconds during testing rather than pulling and re-terminating cables or maintaining separate A-to-B and A-to-A inventory.

Plenum rating is a non-negotiable requirement for any cable installed in the 2-to-4-inch pathways above drop ceilings, under raised floors, or in HVAC ductwork that characterize commercial office towers, healthcare facilities, and multi-tenant data centers. The FS2RPU1U1NNM010's OFNP jacket uses low-smoke, flame-retardant compounds that meet the stringent combustion and smoke-generation limits of NFPA 262 (UL 910), ensuring code compliance during AHJ inspections and providing measurably safer performance in the event of fire. This 10-meter length is the workhorse size for intra-row and cross-aisle runs in hot-aisle/cold-aisle data center layouts, connecting spine switches in the middle-of-row position to leaf switches at the ends of adjacent racks, or patching from equipment distribution area panels to SAN directors and core routers positioned 20-30 feet away. The aqua jacket color provides instant visual differentiation from OM3 (aqua with orange in legacy Panduit lines, though OM3 is being phased out) and singlemode (yellow) cables during troubleshooting and maintenance, reducing the risk of accidentally patching multimode transceivers into singlemode infrastructure or vice versa—a mistake that results in zero link and often damaged optics.

The Signature Core platform represents Panduit's quality benchmark for factory-terminated fiber solutions, encompassing controlled-geometry ferrule polishing (better than 50nm apex offset), automated insertion-loss testing of every connector, and serialized test reporting that provides full traceability from raw fiber spool to finished assembly. This level of manufacturing rigor delivers the consistency required for large-scale deployments where hundreds or thousands of links must operate reliably without field rework, particularly in cassette-based architectures where MTP trunk cables feed breakout modules that present 12 or 24 LC interfaces—each additional connection point in the channel adding insertion loss, and each poorly terminated connector multiplying troubleshooting cost. Compliance with ISO/IEC 11801 Ed. 2.2, TIA-568-C.3, and the FOCIS-3/FOCIS-10 geometry standards ensures interoperability with transceivers and patch panels from any vendor, while RoHS compliance addresses the lead-free and restricted-substance mandates increasingly required by corporate procurement policies and government contracts. For commercial integrators quoting structured cabling projects in financial services, healthcare, or higher-education verticals, factory-terminated solutions like the FS2RPU1U1NNM010 eliminate the field-termination labor, test-equipment cost, and scrap risk of on-site fusion splicing or mechanical connectorization, compressing project schedules and delivering warrantable performance from day one.