Panduit FZ2RLU1U1ONM046 OM4 LC Uniboot Fiber 46m

Panduit FZ2RLU1U1ONM046 QuickNet OM4 LC Uniboot Fiber Assembly

The Panduit FZ2RLU1U1ONM046 is a 46-meter (151 ft) pre-terminated OM4 multimode fiber assembly engineered for 40/100 Gigabit Ethernet deployments in mission-critical data centers and telecommunications facilities. Featuring LC uniboot duplex connectors and Low Smoke Zero Halogen (LSZH) jacketing, this 2-fiber trunk delivers the performance headroom and installation efficiency required when deploying high-density 40GBASE-SR4, 100GBASE-SR4, or 100GBASE-SR10 infrastructure under tight timelines. QuickNet factory termination eliminates field splicing variables while the compact uniboot form factor addresses the rack-density challenges facing modern structured cabling installations.

Key Features

• OM4 50/125µm multimode fiber — supports 40G to 150m and 100G to 100m per IEEE 802.3ba, providing migration headroom beyond 10G infrastructure
• LC uniboot duplex connector — single-boot design reduces cable diameter by ~30% vs. dual-boot assemblies, improving airflow and pathway fill in congested enclosures
• Tool-free polarity reversal — flip transmit/receive fibers at the connector without re-termination or adapter modules, simplifying MACs in Type A/B/C trunk-and-break-out topologies
• LSZH jacket (IEC 60332-1, IEC 61034) — meets plenum-alternative requirements for enclosed spaces where PVC combustion byproducts pose life-safety or equipment risks
• 46-meter engineered length — factory-specified for cross-connect applications spanning equipment distribution area to intermediate distribution frame or horizontal cabling runs in mid-rise buildings
• QuickNet pre-terminated assembly — factory-polished connectors achieve <0.2 dB insertion loss typical, eliminating the 0.5–0.75 dB variability and 15–20 minute per-connector labor overhead of field terminations
• TIA-568.3-D and ISO/IEC 11801 compliant — tested and certified to industry standards for enterprise structured cabling, ensuring interoperability across multi-vendor active equipment

OM4 laser-optimized multimode fiber uses a 50µm core with tightly controlled modal bandwidth (≥4700 MHz·km at 850 nm) to support the parallel-optic transmission schemes required by 40G and 100G standards. Unlike OM3 (which bottlenecks 100GBASE-SR4 at 70 meters), OM4 extends those same applications to 100 meters — often the difference between a compliant horizontal or backbone link and a costly single-mode upgrade. The aqua-jacketed cable meets ANSI/TIA-598-D color conventions for instant visual identification during adds, moves, and changes. Panduit's LC uniboot connector integrates both transmit and receive fibers into a single low-profile housing, measuring just 6.25mm wide versus the 12.7mm footprint of traditional duplex LC. That 50% width reduction translates directly into denser patch-panel utilization: a 1U enclosure that holds 48 conventional duplex LC ports can accommodate 96 uniboot ports in the same rack space. The patented push-pull tab and integrated strain relief maintain a minimum 20N pull force without requiring a separate boot or furcation kit. For Type B polarity (where A-end and B-end connectors require opposite fiber mapping), the uniboot design allows the installer to slide the connector boot backward, rotate the internal fiber holder 180°, and snap it back into place — a 10-second operation that replaces the former workflow of ordering mirror-image trunks or installing polarity-inverting modules.

Low Smoke Zero Halogen jacketing addresses the European EN 50575 CPR Construction Products Regulation and North American building codes (IBC, NFPA 90A) that restrict PVC in return-air plenums, vertical risers, and equipment rooms lacking independent HVAC isolation. During combustion, LSZH compounds emit 60–80% less smoke opacity (per IEC 61034-2 testing) and produce negligible hydrogen chloride or hydrogen fluoride — the corrosive gases responsible for secondary electronic equipment damage in post-fire environments. While LSZH does not carry a formal UL plenum rating (that designation applies only to fluoropolymer-jacketed cables), it satisfies the IEC 60332-1 vertical flame test and is widely accepted by European telecom operators and hyperscale data-center tenants as the baseline for enclosed-space fiber installations. The 2.0mm cordage diameter strikes a balance between flexibility (minimum bend radius of 30mm under no-load conditions) and durability (crush resistance ≥220N/cm per IEC 60794-1-2 E3), making it suitable for both permanent infrastructure and reconfigurable patching applications. Panduit's QuickNet manufacturing process terminates each fiber under controlled factory conditions: cleaving with sub-micron precision, polishing to IEC 61300-3-35 geometry specifications (<50nm apex offset), and validating insertion loss with calibrated test equipment before the assembly leaves the production line. That front-loaded quality control reduces the mean insertion loss to 0.15–0.20 dB and shrinks the failure rate to <0.1% — an order of magnitude better than field terminations performed under time pressure with portable tooling.

This assembly ships with TIA-568.3-D, ISO/IEC 11801-1:2017, and ANSI/TIA-942-B certification, covering the structured cabling, international premises, and data-center infrastructure standards that govern enterprise and colocation deployments. The 46-meter length maps to typical equipment-distribution-area to telecommunications-room spans in multi-tenant office buildings (100–150 ft maximum horizontal distance per TIA-568.2-D) or cross-connects between core and distribution switches in raised-floor data centers. For integrators managing SAN, hyperconverged infrastructure, or spine-leaf architectures where every 0.1 dB of loss budget matters, QuickNet's factory-certified performance eliminates the uncertainty introduced by field variables — technician skill, contamination, cleave-angle drift — and ensures day-one compliance with link-loss budgets (typically 2.6 dB for 100GBASE-SR4 over OM4). The 10-pack minimum order quantity aligns with staged deployments: enough to populate a 1U patch panel or bundle the fiber infrastructure for a single rack without carrying excess inventory.