Panduit FS2RLU1U1NNM015 OM4+ LC Uniboot Patch Cord 15m

Panduit FS2RLU1U1NNM015 Signature Core OM4+ LC Uniboot Fiber Patch Cord

The Panduit FS2RLU1U1NNM015 is a 15-meter duplex OM4+ multimode fiber patch cord designed for high-density datacenter and enterprise network installations where insertion loss budgets are critical. Built on Panduit's Signature Core fiber platform, this cable delivers ultra-low insertion loss performance that extends reach and improves link margin on 40/100 Gigabit Ethernet applications. The aqua LSZH jacket meets plenum and riser fire safety requirements, while the LC Uniboot connectors on both ends reduce patch panel congestion and simplify polarity management in structured cabling systems. This cable ships as a single unit with ten per carton for project-scale deployments.

Key Features

• OM4+ Signature Core multimode fiber with 50µm core diameter for enhanced bandwidth and reach over standard OM4
• Ultra-low insertion loss specification improves link budgets and extends maximum channel length on 40GBASE-SR4 and 100GBASE-SR4 applications
• LC Uniboot duplex connectors with integrated pull-boot design enable tool-free polarity reversal and reduce footprint by 50% versus traditional duplex LC
• LSZH (Low Smoke Zero Halogen) 2.0mm cable jacket complies with IEC 60332-1 and IEC 61034 for installation in plenum, riser, and enclosed pathways
• 15-meter (49.2 ft) length suits cross-connect applications in telecom rooms, horizontal distribution areas, and mid-size equipment rows
• Aqua jacket color follows TIA-598-D color coding standard for OM4/OM4+ 50µm laser-optimized multimode fiber
• Factory-terminated and tested to ISO/IEC 11801, TIA-568-C.3, FOCIS-3, and FOCIS-10 standards with full test report traceability
• RoHS compliant construction with Panduit commercial-grade quality control and manufacturer warranty

OM4+ fiber represents Panduit's enhanced variant of the OM4 multimode standard, engineered to deliver tighter insertion loss and return loss tolerances than the baseline OM4 specification. Standard OM4 fiber supports 40 Gigabit Ethernet to 150 meters and 100 Gigabit Ethernet to 100 meters over duplex LC connectivity. OM4+ Signature Core extends these distances by reducing typical insertion loss to under 0.15 dB per mated pair—substantially below the 0.35 dB maximum allowed by TIA-568-C.3. This headroom matters in cascaded patch panel architectures where multiple mated pairs consume the total link budget: a six-connection horizontal channel on standard OM4 fiber might allocate 2.1 dB for connectors alone, leaving minimal margin for fiber attenuation and splices. OM4+ cables reduce that connector budget by 40-50%, allowing longer backbone runs, additional consolidation points, or future migration to 200G/400G optics without re-cabling. The 50µm core diameter maintains full backward compatibility with OM3 and OM4 infrastructure, so integrators can mix OM4+ patch cords into existing OM4 permanent links to improve end-to-end performance without forklift upgrades.

The LC Uniboot connector design consolidates the traditional duplex LC footprint into a single compact body, cutting patch panel port density requirements in half and reducing the cable bundle diameter in high-density overhead ladder rack and vertical cable management. Each Uniboot housing includes an integrated pull-boot that protects the duplex fiber during installation and provides a secure grip point for insertion and removal—eliminating the need for separate strain relief boots. The key advantage for datacenter moves/adds/changes is tool-free polarity reversal: the duplex fiber assembly inside the Uniboot connector can be rotated 180° without de-terminating the cable, allowing field techs to swap transmit and receive fibers in seconds to correct A-to-B versus A-to-A patching errors or adapt to transceiver polarity requirements. This feature is critical in spine-leaf architectures and MPO-to-LC breakout scenarios where polarity mistakes can halt entire switch installations. The reduced connector width also improves airflow around densely patched equipment, lowering the risk of heat buildup in top-of-rack switch SFP+ cages.

The 2.0mm LSZH jacket construction meets international fire safety standards for low smoke emission and zero halogen content, making this cable suitable for installation in occupied spaces, enclosed cable trays, and air-handling plenums where PVC combustion byproducts would pose a toxic hazard. LSZH-rated cables are mandatory in European datacenters under EN 50575 (CPR) and increasingly specified in North American healthcare, education, and government facilities where building codes prioritize occupant safety during fire events. The aqua jacket color provides instant visual identification of OM4/OM4+ fiber per TIA-598-D, preventing accidental cross-connection with OM3 (aqua), OS2 singlemode (yellow), or OM5 wideband multimode (lime green) cables during maintenance. Panduit's factory termination process includes end-face inspection, insertion loss testing, and return loss verification on every cable, with serialized test data available for projects requiring as-built documentation or LEED certification. The 15-meter length is optimized for telecom room cross-connects, equipment-to-patch-panel connections in 42U racks, and horizontal distribution to intermediate distribution frames (IDF) in structured cabling topologies.

This patch cord meets or exceeds ISO/IEC 11801 Edition 2.2, TIA-568-C.3, TIA-604-3 (FOCIS-3 for LC connectors), and TIA-604-10 (FOCIS-10 for ferrule endface geometry) standards, ensuring interoperability with all LC-compatible transceivers and structured cabling systems. The FS2RLU1U1NNM015 is factory-tested and backed by Panduit's manufacturer warranty, providing the performance assurance and supply chain traceability required for mission-critical datacenter and enterprise network deployments where fiber link quality directly impacts application uptime and scalability.