Panduit FYXUP77Y001F015 OM3 Multimode Pre-Terminated Fiber Trunk Assembly
Overview
The Panduit FYXUP77Y001F015 is a 15-foot (4.6m) QuickNet™ HD Flex pre-terminated OM3 multimode fiber trunk assembly engineered for high-density structured cabling environments where installation speed and signal integrity cannot be compromised. Designed under the QuickNet HD Flex sub-brand, this assembly targets fiber optic cabling deployments in data centers, telecommunications rooms, entrance facilities, and equipment distribution areas — anywhere a pre-terminated solution eliminates field-termination risk and accelerates commissioning timelines.
Unlike field-terminated runs that introduce connector variability and demand skilled craft time on the floor, the FYXUP77Y001F015 ships factory-terminated and tested, meaning you pull it, plug it, and move on. At 15 feet, this assembly is sized for intra-rack or adjacent-rack interconnects — the reach that covers top-of-rack switch connections to patch panels or spine-to-leaf horizontal links within a single row.
Key Features
- OM3 Multimode Fiber (50/125µm): OM3 glass supports 10GbE to 300 meters and 40/100GbE at shorter distances. At 15 feet, you are well inside the performance envelope for any current-generation active equipment — no derating, no headroom math needed. If you are running 40GbE or 100GbE between top-of-rack switches and patch panels, OM3 at this length is a non-issue.
- QuickNet™ HD Flex Construction: The HD Flex format is built for high-density patching environments where cable management matters as much as the cable itself. Flexible jacketing and a compact form factor reduce fill volume in conduit and cable trays, which becomes a real constraint once a data center row is half-built and tray space is committed.
- 15-Foot (4.6m) Factory Length: Pre-cut to 15 feet, this assembly eliminates field measurement and cutting error. In structured cabling environments following ANSI/TIA-942-B zone cabling architectures, pre-defined trunk lengths enforce consistent slack management and simplify as-built documentation — both of which reduce troubleshooting time during moves, adds, and changes.
- Pre-Terminated, Factory-Tested: Every connector on this assembly was terminated and tested under controlled factory conditions. Field terminations introduce insertion loss variability tied to technician skill and environmental conditions (dust, humidity, cleanliness). A factory-terminated assembly removes that variable entirely, which matters in environments where link budget is tight or where the cost of a re-pull exceeds the assembly price.
- Standards Compliance — TIA-568.3-D, ISO/IEC 11801, ANSI/TIA-942-B: Meeting three complementary standards means this assembly integrates into both domestic (TIA) and international (ISO/IEC) cabling plant designs without exception processes or waiver documentation. ANSI/TIA-942-B specifically governs data center telecommunications infrastructure — specifying this standard on the assembly confirms it was designed for the data center environment, not adapted from a general commercial cabling product line.
- Rapid Deployment for Critical Infrastructure: In enterprise data centers, telecommunications rooms, and entrance facilities, the labor cost per termination frequently exceeds the material cost. Using a pre-terminated trunk shifts that cost to the factory and compresses your on-site labor window — relevant on any project with a constrained maintenance window or a hard cutover deadline.
- Single-Pack (PK1) Ordering: The PK1 designation means this ships as an individual assembly, not a bulk reel or multi-unit pack. For project procurement, this simplifies quantity ordering when exact run counts are known — no overages, no partial-pack waste.
Integration and Compatibility
The FYXUP77Y001F015 is built for integration into structured cabling infrastructure deployments that follow TIA-568.3-D and ISO/IEC 11801 cabling standards. It is designed to pair with Panduit QuickNet HD Flex cassettes, panels, and enclosures that accept the same connector interface — verify connector type compatibility with your target panels before ordering, as the QuickNet HD Flex ecosystem spans MPO, LC, and SC configurations depending on the specific part number series.
In network switch environments running SFP+ or QSFP transceivers on OM3 fiber, this 15-foot assembly provides the backbone between active equipment ports and your patching layer. OM3 multimode is compatible with 850nm VCSEL-based transceivers, which are standard on 10G SFP+ and 40G/100G QSFP modules from all major switch vendors.
For broader fiber optic infrastructure planning, consider how this assembly fits into your zone distribution topology — at 15 feet, it is appropriate for consolidation point-to-equipment connections or intra-zone links within a single equipment row, not for inter-zone or MDA-to-HDA backbone runs.
Frequently Asked Questions
Q: What fiber type does the FYXUP77Y001F015 use?
A: The FYXUP77Y001F015 uses OM3 multimode fiber (50/125µm). OM3 supports 10GbE up to 300 meters and 40/100GbE at shorter distances. At 15 feet, it is well within the performance envelope for all current-generation multimode-compatible active equipment.
Q: What standards does the FYXUP77Y001F015 meet?
A: This assembly meets TIA-568.3-D, ISO/IEC 11801, and ANSI/TIA-942-B. TIA-568.3-D governs optical fiber cabling components; ISO/IEC 11801 is the international generic cabling standard; ANSI/TIA-942-B specifically covers data center telecommunications infrastructure.
Q: What is the exact length of this fiber trunk assembly?
A: The FYXUP77Y001F015 is 15 feet (4.6 meters) in length, factory-terminated and ready to install without field cutting or splicing.
Q: Is the FYXUP77Y001F015 appropriate for data center use?
A: Yes. The assembly is specifically listed for data centers, telecommunications rooms, entrance facilities, and equipment distribution areas. Compliance with ANSI/TIA-942-B confirms it was designed to data center cabling infrastructure requirements, not adapted from general commercial cabling specifications.
Q: Does this ship as a single unit or in a multi-pack?
A: The PK1 designation indicates this ships as a single assembly per order unit, which simplifies procurement when exact run counts are known and avoids partial-pack waste on smaller deployments.
Q: What is the sub-brand for this assembly and what does it mean for compatibility?
A: The FYXUP77Y001F015 is part of the Panduit QuickNet™ HD Flex sub-brand. HD Flex is a high-density flexible trunk system designed for compact, high-port-count patching environments. Verify connector interface compatibility with your specific QuickNet HD Flex panels or cassettes before ordering, as the broader QuickNet ecosystem spans multiple connector types.
The FYXUP77Y001F015 is a 15-foot QuickNet HD Flex OM3 trunk assembly — the kind of pre-terminated unit that earns its place on a data center BOM not because of a headline spec, but because of what it removes from your installation process. Factory termination and TIA-568.3-D compliance mean the connector performance is already documented; you are not betting on a field technician's polish quality under time pressure.
Technical Highlights:
- OM3 Multimode (50/125µm): Fully capable at 10GbE, 40GbE, and 100GbE at 15-foot distances — no derating calculation needed. 850nm VCSEL transceiver compatibility covers the standard SFP+/QSFP port types you will find on current spine and leaf switching hardware.
- ANSI/TIA-942-B Compliance: This standard is specific to data center telecommunications infrastructure. An assembly that cites TIA-942-B was designed for the environment, not upsold from a commercial-grade product line — a meaningful distinction when you are building a cabling plant intended to last 10-15 years through multiple equipment refresh cycles.
- Triple Standards Coverage (TIA-568.3-D + ISO/IEC 11801 + ANSI/TIA-942-B): Covers both domestic and international project documentation requirements from a single SKU — useful on multi-site enterprise builds where different facilities follow different regional standards bodies.
Deployment Considerations:
- At 15 feet (4.6m), this assembly is sized for intra-rack and adjacent-rack connections — top-of-rack switch to overhead tray, or row-local consolidation point to equipment. Do not spec it for inter-zone backbone runs; those require longer trunk lengths from the same QuickNet HD Flex family.
- Verify the specific connector interface (MPO, LC, SC) against your target Panduit QuickNet HD Flex panels or cassettes before ordering. The HD Flex ecosystem spans multiple connector types under similar part number structures — a mismatch here costs a re-order, not just a field adjustment.
This assembly is well-positioned for enterprise data center rows where a structured, standards-compliant cabling plant is being built in parallel with active equipment installation — specifically where speed-to-commissioning matters and where field-terminated connectors introduce unacceptable variability in a link-budget-tight 100GbE environment.
