Middle Atlantic NM Plgmd Cord-end 6FT. NM - NM20-C6

Middle Atlantic NM20-C6 Plugmold Cord-End Outlet Center

Overview

The Middle Atlantic NM20-C6 is a six-duplex plugmold outlet center with a cord-end connection, designed for structured AV and low-voltage rack installations where you need distributed AC power without running individual power strips to each equipment bay. The NM20-C6 (often searched as NM20 C6) installs along the interior of a rack or raceway to put an outlet within reach of every device in the bay — no daisy-chaining, no cable-management nightmares from oversized power strips.

TAA compliance makes this unit procurement-friendly for federal, state, and municipal projects subject to the Trade Agreements Act — a requirement that eliminates a surprising number of competing products from consideration. If your project involves government facilities, courthouses, transit authorities, or any federally funded installation, the NM20-C6 clears that gate without substitution.

This is part of Middle Atlantic's rack power and cable management line, a product family that integrates tightly with their enclosure and raceway ecosystem. It is not a standalone surge protector or UPS — it is a passive outlet distribution unit, so pair it appropriately with upstream protection if your equipment demands it.

Key Features

• Six Duplex Outlets: Six duplex positions means up to 12 individual plug points along a single cord-end run — enough to power a full bay of AV receivers, media converters, or low-draw rack components without fighting for outlets. In a typical AV rack with a mix of signal processors, streaming devices, and control hardware, six duplex positions cover the bay cleanly.
• Cord-End Connection: The cord-end design plugs directly into an existing outlet or PDU rather than requiring hardwire termination. This matters for installations where a licensed electrician is not on-site for commissioning, and it simplifies moves or reconfiguration without electrical rough-in work.
• TAA Compliance: Government and government-adjacent projects increasingly mandate TAA-compliant components at every level of the bill of materials. The NM20-C6 meets that requirement, which protects your bid from last-minute substitution requests and keeps the project on schedule.
• Plugmold Form Factor: The slim plugmold profile fits flush against the interior wall of a rack or runs along a raceway channel, keeping outlet positions accessible without consuming rack units. Compared to traditional horizontal PDUs, this profile leaves vertical space for equipment rather than hardware.
• Designed for Structured Installations: This unit fits the Middle Atlantic NM20 platform, making it compatible with the broader rack accessories and raceway ecosystem for AV integrators who standardize on one manufacturer's mounting and power infrastructure.

Integration & Compatibility

The NM20-C6 is designed to integrate within the Middle Atlantic NM20 plugmold platform. It works alongside raceway channel components and is suited for AV rack power distribution applications including corporate AV, education technology buildouts, and government facility installs. Because the cord-end connection is passive, it is compatible with any upstream outlet that accepts a standard plug — consult the NM20 series documentation for plug type and amperage rating to match your circuit capacity. For installations requiring surge suppression or UPS backup, pair this outlet center with an appropriate power conditioning unit upstream.

The TAA-compliant designation supports procurement on GSA schedules and cooperative purchasing agreements where country-of-origin requirements apply to structured cabling and rack power components.

Frequently Asked Questions

Q: Is the Middle Atlantic NM20-C6 TAA compliant?

A: Yes. The NM20-C6 is TAA compliant, making it eligible for use on federal, state, and municipal projects subject to Trade Agreements Act procurement requirements.

Q: How many outlets does the NM20-C6 provide?

A: The NM20-C6 includes 6 duplex outlet positions, providing up to 12 individual plug points along a single outlet center run.

Q: Does the NM20-C6 require hardwiring, or does it use a cord-end connection?

A: The NM20-C6 uses a cord-end (plug-in) connection. It plugs into an existing outlet or PDU — no hardwire termination or licensed electrician required for connection.

Q: Is the NM20-C6 a surge protector or UPS?

A: No. The NM20-C6 is a passive outlet distribution unit. It does not include surge suppression or battery backup. For installations requiring power conditioning or UPS protection, add those upstream of this unit.

Q: What platform is the NM20-C6 part of?

A: The NM20-C6 is part of Middle Atlantic's NM20 plugmold platform, designed to integrate with their raceway and rack enclosure ecosystem for structured AV and low-voltage installations.

James Everett

The NM20-C6 is one of those components that earns its place on a BOM not through complexity but through consistency. Six duplex outlets on a cord-end unit, TAA-compliant — that combination solves two real problems on government AV installs: enough outlet density to power a full equipment bay, and a procurement checkbox that clears without substitution headaches.

Technical Highlights:

• 6 Duplex Outlets: Twelve plug points from a single unit keeps the outlet count honest for a mid-density rack — signal processors, control systems, media converters, and a couple of spare positions for field changes.
• Cord-End Design: Plug-in termination means commissioning teams can connect and reconfigure without electrical rough-in — a real time saver on multi-rack installs where you are programming and swapping equipment simultaneously.
• TAA Compliance: For integrators working on GSA contracts or state cooperative purchasing agreements, TAA compliance on every power component in the BOM is non-negotiable. The NM20-C6 is already there.

Deployment Considerations:

• This is a passive outlet center — no surge suppression, no filtering. Plan your upstream power conditioning before specifying this unit on any install with sensitive DSP or control hardware.
• Verify the NM20 platform channel and mounting compatibility with your specific Middle Atlantic enclosure before ordering; the NM20 series has multiple configurations and not all raceway channels accept every cord-end unit without additional hardware.

The NM20-C6 is the right call for government facility AV buildouts and education technology racks where TAA compliance is a hard procurement requirement and outlet density across a bay matters more than integrated power protection.