Middle Atlantic NM Plgmd Cord-end 3FT. NM - NM20-C3

Middle Atlantic NM20-C3 Plugmold Plug-In Outlet Center Unit

The Middle Atlantic NM20-C3 is a plug-in outlet center unit from the NM20 Plugmold series, delivering three duplex outlet positions on a 3-foot cord — purpose-built for rack and enclosure power distribution where you need clean, accessible AC outlets without running separate power strips or wrangling extension cords through a cabinet. If you're outfitting AV racks, security enclosures, or structured wiring bays, the NM20-C3 (often searched as NM20 C3) slots into the NM20 raceway system to extend outlet access exactly where gear lands. Explore the broader Middle Atlantic product catalog for compatible rack infrastructure.

Key Features

• 3 Duplex Outlet Positions: Three duplex receptacles in a single cord-end unit means up to six devices can draw power from one drop — practical in dense rack builds where outlet count per unit of space matters. No daisy-chaining or stacked power strips needed at the equipment shelf.
• TAA Compliant: The NM20-C3 meets Trade Agreements Act requirements, making it eligible for U.S. federal, state, and municipal procurement — important if you're building out government facilities, public safety infrastructure, or any project subject to TAA sourcing rules. Verify TAA status with your contracting officer if required by your specific contract vehicle.
• Plugmold System Integration: Designed to work within Middle Atlantic's NM20 raceway and outlet system, so it installs cleanly alongside other NM20 components rather than as a standalone afterthought. The plug-in cord-end format means no hardwiring — install is fast and the unit can be repositioned if rack layouts change. See rack power accessories for compatible components.
• 3-Foot Cord Length: The 3-foot cord gives enough reach to connect to a rack-mounted PDU or wall outlet without excess slack pooling in the enclosure — keeps cable management cleaner than longer generic strips in tight rack environments. Measure your rack depth and PDU position before ordering if cord length is a constraint.

Integration & Compatibility

The NM20-C3 is a component of Middle Atlantic's NM20 Plugmold series, designed for use with compatible NM20 raceway and outlet infrastructure. It is well-suited for rack enclosures and cabinets used in security, AV, and structured wiring installations. Because this is a plug-in unit rather than a hardwired PDU, it integrates without an electrician in most jurisdictions — confirm local electrical codes for your application. For larger rack power distribution needs, consider pairing with a dedicated rack-mount PDU that offers surge protection, metering, or remote switching.

Frequently Asked Questions

Q: Is the Middle Atlantic NM20-C3 TAA compliant?

A: Yes. The NM20-C3 is TAA compliant, making it eligible for use on U.S. government contracts and projects subject to Trade Agreements Act sourcing requirements.

Q: How many outlets does the NM20-C3 provide?

A: The NM20-C3 has 3 duplex outlet positions, providing up to six individual outlet receptacles in a single cord-end unit.

Q: What is the cord length on the NM20-C3?

A: The NM20-C3 has a 3-foot cord, as indicated in the product designation. Verify this against your rack layout and PDU placement before ordering.

Q: Is the NM20-C3 a hardwired unit or plug-in?

A: It is a plug-in cord-end unit — part of the Middle Atlantic NM20 Plugmold system. No hardwiring is required, which simplifies installation and allows repositioning if your rack layout changes.

Q: What system is the NM20-C3 compatible with?

A: The NM20-C3 is part of Middle Atlantic's NM20 Plugmold series and is designed to integrate with compatible NM20 raceway and outlet components.

James Everett

The NM20-C3 is one of those components that rarely gets discussed but quietly solves a real problem in rack builds: you need outlets at the equipment level, not just at the PDU. The three-duplex cord-end format means you can drop six receptacles exactly where you need them in an NM20 raceway run — no separate power strip, no velcro-strapped extension cord, no extra cable clutter in an already dense enclosure.

Technical Highlights:

• 3 Duplex Outlets: Six receptacle faces from a single cord-end position — enough to power a small shelf's worth of gear (IP camera PSU, switch, controller) from one connection point in the raceway.
• TAA Compliance: Federal, state, and GSA schedule projects require TAA-sourced components throughout the rack — the NM20-C3 clears that bar, so it won't hold up a procurement review on a government security or AV installation.
• Plug-In Cord-End Design: Installation requires no licensed electrician in most jurisdictions — plug it into the raceway system, connect the cord to your PDU or outlet, done. If the rack gets reconfigured six months later, the unit moves without a service call.

Deployment Considerations:

• The 3-foot cord length works well for standard rack depths when the PDU is mounted in the same enclosure — measure your PDU-to-outlet-center distance before committing, especially in deeper or non-standard enclosures where you may need a longer cord variant.
• This is a cord-end outlet unit, not a surge-protected PDU. If the downstream equipment requires surge suppression or circuit protection, that needs to be addressed at the PDU level — the NM20-C3 does not provide it.

Best fit for integrators building out security rack enclosures, AV equipment bays, or government-procured structured wiring cabinets where TAA compliance is a contract requirement and clean in-rack outlet distribution matters more than advanced PDU features.