Middle Atlantic NM Drop Ceiling Connector - PN10F86WH

Middle Atlantic PN10F86WH Drop Ceiling Connector

Overview

The PN10F86WH is a nonmetallic, white drop ceiling connector designed to route cables cleanly from a suspended ceiling into surface-mounted raceway — eliminating exposed cable drops that violate NEC aesthetics requirements and create snag points in finished commercial spaces. Part of Middle Atlantic's Eclipse PN10 series, the PN10F86WH gives integrators a tidy, code-conscious transition point where vertical cable runs meet horizontal cable management raceway at ceiling level. If you're wiring security cameras, access control readers, or low-voltage data runs through drop ceilings into wall-mounted raceway, this connector closes the gap cleanly without metal hardware that can abrade cable jackets.

Compatibility

Designed specifically for the Middle Atlantic PN03 Series raceway. The connector accepts standard 1/2" and 3/4" concentric trade-size knockouts, accommodating the conduit and cable diameters most common in low-voltage security and AV installations. The included PN153R Reducer Adapter provides flexibility for smaller cable diameters, so a single connector SKU covers the range of conductor sizes you're likely to pull through a given run — useful when mixing camera homerun cables with thinner data or control wiring in the same raceway entry point. For broader Middle Atlantic raceway planning, confirm your PN03 series raceway variant is on hand before ordering, as the PN10F86WH is engineered to the PN03 mechanical profile.

Installation Notes

The connector is nonmetallic construction, which matters in drop ceiling environments where NEC Article 800/820 low-voltage wiring must avoid inadvertent ground paths through metallic fittings. White finish matches standard suspended ceiling grid components — no painting required in typical commercial white-ceiling environments. The concentric knockout design means you punch out only what you need for your cable diameter, leaving the remaining rings intact to maintain a clean, tight fit around the conduit or cable bundle. For low-voltage cable management runs requiring a conduit fitting at the raceway entry, pair with the appropriate PN03 Series raceway end fitting for a fully closed run.

What's in the Box

• 1x PN10F86WH Nonmetallic Drop Ceiling Connector
• 1x PN153R Reducer Adapter