Middle Atlantic NM Cover Clip PN10 FOG WH - PN10F06FW

Middle Atlantic PN10F06FW Eclipse PN10 Cover Clip Fitting — Fog White

Overview

The Middle Atlantic PN10F06FW is a cover clip fitting for the Middle Atlantic Eclipse PN10 raceway series, designed to close out panel knockout openings at raceway joints with a color-matched fog white finish. If you're installing PN10 cable management in a clean finished environment — office rows, server room perimeters, or AV/security control surfaces — this clip is the difference between a complete-looking installation and exposed knockout edges that catch auditor attention. The PN10F06FW snaps in without tools, making it a practical finishing detail during final walkthrough rather than a separate rough-in step.

Key Features

• Snap-fit, tool-free installation: No screwdriver required — the clip seats by hand pressure. On multi-run cable management installations with dozens of joint closures, this reduces finishing time meaningfully compared to fastener-based covers.
• Color-matched fog white finish: Matched to the PN10 series fog white raceway body. Mismatched covers read as incomplete work on inspections — this eliminates that issue without paint or field modification.
• Low-profile edge protection: The clip sits flush at the knockout opening, protecting cable jacket edges from the sharp metal lip left by panel knockouts. On high-count wire bundles routed through joints, edge abrasion over time is a real failure mode — this addresses it at the fitting level.
• PN10 series compatibility: Engineered specifically for the Eclipse PN10 raceway system. Dimensional fit is exact; substitute clips from other series lines will not seat correctly. Use the PN10F06FW only on confirmed PN10 raceway fittings joints.
• Eclipse PN10 series integration: Part of a complete fitting ecosystem — Middle Atlantic's PN10 line covers straights, elbows, tees, and closures as a matched set. Specifying all fittings from the same series avoids the color drift and profile mismatch that occurs when mixing fitting generations.

Integration & Compatibility

The PN10F06FW is compatible exclusively with the Middle Atlantic Eclipse PN10 raceway series. Before ordering, confirm your installed raceway is PN10 — not PN5, PN10G, or other Eclipse sub-series, as cover clip profiles are not interchangeable. Fog white is the standard finish; verify your raceway color matches before committing to a quantity order. For large structured cabling or security infrastructure projects requiring multiple fitting types, cross-reference the full Eclipse PN10 fitting catalog to consolidate the order.

Frequently Asked Questions

Q: Is the PN10F06FW compatible with Middle Atlantic PN5 or other Eclipse sub-series raceways?

A: No. The PN10F06FW is designed specifically for the Eclipse PN10 series. PN5 and other sub-series use different profile dimensions — this clip will not seat correctly on those systems.

Q: Does installation require any tools?

A: No. The PN10F06FW uses a snap-fit design that installs by hand pressure only — no screwdriver or hardware required.

Q: What color finish does the PN10F06FW ship in?

A: Fog white, matched to the standard Eclipse PN10 raceway body color. Verify your installed raceway is fog white before ordering.

Q: What does the PN10F06FW cover?

A: It covers panel knockout openings at PN10 raceway joints, providing a finished low-profile edge and protecting cable jackets from sharp knockout edges.

Q: Can I mix this fitting with covers from other Middle Atlantic raceway lines?

A: Not recommended. Middle Atlantic raceway fitting profiles and color batches are series-specific. Mixing fitting lines risks profile mismatch, poor seating, and visible color variation at joints.

Eden Phillips

The PN10F06FW is one of those finishing parts that gets overlooked at order time and creates a last-day scramble on site. It's a snap-fit cover clip — specifically engineered for the Eclipse PN10 raceway series — and the fog white color match is factory-accurate, which matters when your installation is in a visible office or control room environment where mismatched whites stand out under fluorescent lighting.

Technical Highlights:

• Snap-fit installation: Seats by hand pressure at PN10 joint knockout openings — no fasteners, no driver required. On a 20-run installation with 4-6 joint closures per run, the cumulative time savings over screw-fixed covers is real.
• Low-profile edge protection: The clip guards cable jacket edges against the sharp lip left by panel knockouts — relevant on dense bundles where jackets contact the fitting edge under tension over months of service.
• Series-matched fog white finish: Color-matched to the PN10 raceway body at the factory level. Field-painted or aftermarket covers drift in color within a year under UV and cleaning cycles.

Deployment Considerations:

• Confirm your raceway is Eclipse PN10 before ordering — Middle Atlantic's PN5 and PN10G series use different clip profiles and the PN10F06FW will not seat in those channels.
• Order these at the same time as your raceway run — fog white finish batches are consistent within a production lot, but re-orders added months later may show a slight color delta against an installed run.

Best fit for commercial AV, security control room builds, or structured cabling installs where the Eclipse PN10 is already specified and a clean fog white finish is a client-facing requirement — not a back-of-rack afterthought.