Middle Atlantic NM Blank END FTG 2900 WH - 2910B-WH

Middle Atlantic 2910B-WH Blank End Fitting for 2900 Series Uniduct

Overview

The Middle Atlantic 2910B-WH is a non-metallic blank end fitting designed to terminate open ends of 2900 Series uniduct runs in a clean, finished installation. Sold individually, this PVC end cap drops into existing 2900 Series raceway deployments to close off exposed duct ends — preventing cable pullout, reducing dust ingress, and keeping low-voltage wiring organized at panel edges, junction points, or wall terminations.

If you're building out a structured cabling run with Middle Atlantic raceway and need to cap the endpoint of a cable management duct run cleanly, the 2910B-WH is the correct part. The white finish matches white 2900 Series duct and suits installations in light-colored walls, ceilings, or above-ceiling trays where aesthetics matter.

Key Features

• TAA Compliant: The 2910B-WH meets Trade Agreements Act requirements — relevant for federal, state, and government-funded projects where TAA compliance is a bid condition. PVC construction sourced to TAA-qualifying standards.
• PVC Construction: Polyvinyl chloride is the standard material for non-metallic raceway fittings — lightweight, non-conductive, and resistant to the minor mechanical stress that end fittings encounter during and after installation.
• Max 3.2 cm Cable Diameter: Sized to match the 2900 Series duct interior. Confirm your cable bundle diameter fits within 3.2 cm before specifying — overstuffed duct runs that exceed this won't seat the end fitting flush.
• White Finish: Matches white 2900 Series uniduct. If your installation uses ivory or gray duct, verify the color variant before ordering — mismatched end fittings are a common re-order scenario.
• Single-Pack Quantity: Sold as one fitting per unit. Order quantity to match the number of open duct ends in your run.

Integration & Compatibility

The 2910B-WH (often searched as 2910B WH) is compatible with the Middle Atlantic 2900 Series uniduct system. It is not cross-compatible with 2700, 3800, or other Middle Atlantic raceway series — verify your duct series before ordering. For full raceway planning, review the raceway and cord cover category to confirm fittings, couplings, and accessories match your installed duct series. Pair with the appropriate low-voltage mounting hardware when routing signal cables in AV or security installations.

Frequently Asked Questions

Q: Is the Middle Atlantic 2910B-WH TAA compliant?

A: Yes. The 2910B-WH is confirmed TAA compliant, making it eligible for use on government and federally funded projects with Trade Agreements Act requirements.

Q: What raceway series is the 2910B-WH compatible with?

A: The 2910B-WH is designed for the Middle Atlantic 2900 Series uniduct. It is not specified for other Middle Atlantic raceway series — confirm your installed duct series before ordering.

Q: What is the maximum cable diameter the 2910B-WH accommodates?

A: The maximum cable diameter is 3.2 cm. Cable bundles larger than this will prevent the end fitting from seating correctly.

Q: What material is the 2910B-WH made from?

A: It is made from polyvinyl chloride (PVC) — standard for non-metallic cable duct fittings.

Q: How many fittings come in one order?

A: One fitting per unit (1 pc). Order the quantity that matches the number of open duct ends in your installation.

Eden Phillips

The 2910B-WH does one thing: it caps the open end of a 2900 Series uniduct run so the installation looks deliberate rather than abandoned. That 3.2 cm maximum cable diameter spec is the only number that matters at spec time — if your terminated bundle is larger, the fitting won't seat flush and you'll be re-ordering a larger duct series instead.

Technical Highlights:

• TAA Compliance: Confirmed TAA-compliant PVC construction — clears the bid requirement on government and federally funded AV or security installations without a separate waiver.
• 3.2 cm Max Cable Diameter: Sized to the 2900 Series interior profile. This is a hard limit — not a suggestion. Verify bundle diameter before closing the run.
• PVC Non-Metallic Construction: Non-conductive by design, which matters in low-voltage signal environments where metallic fittings can introduce grounding complications near sensitive cabling.

Deployment Considerations:

• Confirm your installed raceway is 2900 Series specifically — Middle Atlantic's other duct series (2700, 3800) use different fitting dimensions and this part will not fit correctly.
• Sold individually; factor the total number of open duct terminations into your order quantity to avoid a second shipment on a one-day installation window.

Best fit for light-commercial or government AV and low-voltage security installations using white 2900 Series uniduct where TAA compliance is a project requirement and a finished termination appearance is expected at panel or wall endpoints.