Middle Atlantic NM Blank END FTG 2900 FOG - 2910B-FW

Middle Atlantic 2910B-FW Blank End Fitting for 2900 Series Cable Duct

The Middle Atlantic 2910B-FW is a non-metallic blank end fitting designed to terminate runs of cable duct and raceway in the 2900 Series system. It caps the open end of the duct cleanly, keeping cable routing tidy and preventing damage to conductor insulation at duct termination points. If you're building out a structured cable management run with Middle Atlantic 2900 Series duct, you need this fitting to close each run properly.

Overview

The 2910B-FW ships individually (one fitting per pack) in fog white — the standard finish that matches the 2900 Series raceway line. The body is molded from polyvinyl chloride (PVC), which resists moisture and light chemical exposure in typical indoor installations. At a maximum cable diameter accommodation of 3.2 cm (roughly 1.26 inches), it handles most standard data and low-voltage wire bundles passing through a 2900 Series duct run. TAA compliance means this fitting qualifies for U.S. federal procurement projects subject to the Trade Agreements Act — a relevant detail if you're specifying materials for a government facility, court building, or any TAA-required contract.

Key Features

• 2900 Series compatibility: Designed specifically for the Middle Atlantic 2900 Series duct system — ensures a flush, secure fit without improvised workarounds at the end of each run.
• PVC construction: Non-metallic body won't corrode in humid indoor environments and won't cause galvanic issues when paired with aluminum duct hardware.
• Fog white finish: Matches the standard 2900 Series duct color for a clean, consistent appearance on exposed cable management runs in office, AV, and security equipment rooms.
• 3.2 cm max cable diameter: Accommodates bundled runs of Cat6, low-voltage alarm wire, or coax without requiring a larger fitting — covers the practical range for most IP camera and access control wiring applications.
• TAA compliant: Qualifies for federal and government projects requiring Trade Agreements Act compliance — verify with your contracting officer if TAA is a hard requirement on your bid.
• Single-unit pack: Sold individually, so you can order exactly the quantity your run layout requires without committing to a bulk pack.

Integration & Compatibility

The 2910B-FW (often searched as 2910B FW) is a dedicated end fitting for the Middle Atlantic 2900 Series non-metallic raceway line. It is not a universal fitting — if you're running a different duct series, verify the series match before ordering. For complete runs, pair with 2900 Series duct sections, couplings, and any required corner or tee fittings from the same family. This fitting works with standard low-voltage structured cabling bundles up to 3.2 cm in diameter.

Frequently Asked Questions

Q: Is the 2910B-FW TAA compliant?

A: Yes. The 2910B-FW is TAA compliant, making it eligible for U.S. federal and government procurement projects that require Trade Agreements Act compliance.

Q: What series is the 2910B-FW compatible with?

A: The 2910B-FW is designed for the Middle Atlantic 2900 Series non-metallic cable duct system. Verify series compatibility before ordering if you are using a different raceway family.

Q: What is the maximum cable diameter the 2910B-FW accommodates?

A: The 2910B-FW accommodates a maximum cable diameter of 3.2 cm (approximately 1.26 inches), suitable for most standard low-voltage and data cable bundles.

Q: What material is the 2910B-FW made from?

A: The fitting is molded from polyvinyl chloride (PVC), providing moisture resistance and durability in standard indoor installation environments.

Q: How many fittings come in a pack?

A: The 2910B-FW is sold as a single unit — one fitting per pack — so you can order the exact quantity your installation requires.

Q: What color is the 2910B-FW?

A: Fog white, matching the standard finish of the Middle Atlantic 2900 Series duct system for a consistent appearance on exposed runs.

Jerry Tildsen

The 2910B-FW is a detail most integrators don't think about until they're standing in front of an open duct end — and at that point, the fog white PVC finish and the 3.2 cm cable pass-through matter more than they seem. It's a small part, but a missing or mismatched end fitting on an exposed cable management run is the kind of thing that fails a walk-through inspection on a government buildout.

Technical Highlights:

• TAA Compliance: Verified TAA compliant — relevant on any federal, GSA, or government contract where every component in the cable management bill of materials needs to clear the Trade Agreements Act, not just the active electronics.
• PVC Material: Non-metallic PVC construction avoids corrosion on humid mechanical room runs and eliminates galvanic contact risk where mixed metals are present in the raceway stack.
• 3.2 cm Max Cable Diameter: Fits bundled Cat6, alarm cable, or RG59 coax without forcing you to step up to a larger fitting — covers the practical wire bundle range for most security and AV rough-in work in the 2900 Series duct.

Deployment Considerations:

• Confirm you are running 2900 Series duct before ordering — the 2910B-FW is a series-specific fitting, not a universal end cap, and Middle Atlantic duct families do not share fitting dimensions across series.
• Fog white matches the standard 2900 Series duct finish; if your installation uses a non-standard painted or custom-color duct run, verify color match before committing to quantity.

Best fit for TAA-required government facilities, federal courthouse AV buildouts, or any structured low-voltage installation where the 2900 Series raceway is already spec'd and every component on the submittal needs to clear Trade Agreements Act review.