Middle Atlantic Nivo 9/16 7 Drop Charcoal Gray - AUNV227DG2CHG

Middle Atlantic AUNV227DG2CHG Nivo Acoustic Ceiling Tile 9/16" Lay-In, 7" Drop, Charcoal Gray

Overview

The Middle Atlantic AUNV227DG2CHG is a 2' x 2' acoustic ceiling tile designed for commercial AV installations where equipment must be concealed above a suspended ceiling grid without sacrificing room acoustics or aesthetics. Part of the Middle Atlantic Nivo acoustic ceiling tile system, this tile fills the 9/16" T-bar lay-in grid — the most common suspended ceiling standard in commercial office, conference room, and control room environments — using a 7-inch drop profile that creates the plenum depth needed to route cables and house compact devices above the tile plane.

Built from 100% polyester PET felt in a charcoal gray finish, the AUNV227DG2CHG blends into standard commercial ceilings while handling the acoustic demands of presentation and collaboration spaces. If you're specifying acoustic ceiling tiles for a boardroom, huddle room, or AV-over-IP deployment where clean sightlines and low ambient noise matter, this is the tile to evaluate first.

Key Features

• 2' x 2' Format (60.33 x 60.33 cm): Matches the dominant ceiling grid module in North American commercial construction. Drop-in replacement for standard 24" x 24" tiles — no grid modification, no special framing. Simplifies specification and keeps the install scope predictable.
• 9/16" Lay-In Mounting: Seats directly onto the 9/16" T-bar grid that ships standard in most commercial suspended ceiling systems. No adapter hardware, no custom brackets. If your grid is 9/16", this tile installs the same way as any commodity ceiling tile — faster commissioning, lower labor cost.
• 7-Inch Drop Profile: The 7" plenum depth below the grid gives you meaningful clearance for cable management and low-profile device mounting. When you're routing HDMI, CAT6, or control cabling above a conference room ceiling, that extra depth is the difference between a clean run and a cramped one. Confirm your plenum clearance before spec — the tile itself measures 2" in height above the grid plane, with the 7" drop below.
• PET Felt Construction (100% Polyester): PET felt is a proven acoustic material that absorbs mid-to-high frequency reflections — relevant in rooms with hard surfaces (glass, drywall) where speech intelligibility suffers. The 100% polyester composition means it won't off-gas, is dimensionally stable in conditioned spaces, and holds its shape over years of service without sagging.
• Charcoal Gray Finish: A neutral dark tone that reads as recessive against most commercial ceiling grids. Works well in rooms with projectors or displays where a white or off-white ceiling would reflect ambient light back into the viewing plane. Also reduces visual contrast if equipment or cables are partially visible through the tile.
• Commercial-Grade Build: Designed for the AV infrastructure demands of permanent commercial installations — not a consumer acoustic panel. Consistent dimensions and material density allow repeatable installations across multi-room deployments without per-tile adjustment.

Integration and Compatibility

The AUNV227DG2CHG is specific to 9/16" T-bar lay-in grids. Before ordering, verify your ceiling grid flange width — 15/16" grids are also common and require a different tile model. The 2' x 2' module is not interchangeable with 2' x 4' grid layouts without cutting. This tile is part of the broader Middle Atlantic technical furniture and infrastructure line, which includes rack enclosures, AV furniture, and cable management accessories that pair naturally with ceiling tile deployments in integrated AV systems.

For installations where you need to manage both acoustic performance and equipment access, pair this tile with compatible AV mounting accessories from the same product family. The 7-inch drop profile accommodates most surface-mount ceiling speakers and compact wireless access points — confirm device clearance requirements against the 7" depth before finalizing the design.

Frequently Asked Questions

Q: What ceiling grid type does the AUNV227DG2CHG fit?

A: The AUNV227DG2CHG is designed for standard 9/16" T-bar lay-in suspended ceiling grids. It does not fit 15/16" grid systems without modification — verify your grid flange width before ordering.

Q: What is the actual drop depth of the AUNV227DG2CHG below the ceiling grid?

A: The tile has a 7-inch drop profile below the ceiling grid plane. The body of the tile measures 2 inches in height above the grid. Total installed depth from grid to the bottom of the plenum space created is 7 inches.

Q: What material is the AUNV227DG2CHG made from?

A: It is constructed from PET felt, which is 100% polyester. This material provides acoustic absorption, is dimensionally stable in conditioned commercial environments, and does not off-gas under normal operating conditions.

Q: What color is the AUNV227DG2CHG?

A: Charcoal gray. This neutral dark tone integrates cleanly into commercial suspended ceiling environments and reduces light reflection in presentation or display-focused rooms.

Q: Will the AUNV227DG2CHG fit a standard 2' x 2' ceiling grid opening?

A: Yes. The tile is sized at 2' x 2' (60.33 x 60.33 cm), matching the standard 24" x 24" ceiling module used in the majority of North American commercial buildings. It is a direct drop-in replacement for standard tiles in a 9/16" lay-in grid.

Q: Can the AUNV227DG2CHG support ceiling-mounted AV equipment?

A: The tile's 7-inch drop profile creates plenum depth suitable for cable routing and low-profile device installations such as compact speakers or wireless access points. Confirm your specific device's clearance and weight requirements against the tile and grid specifications before mounting equipment directly to the tile.