Middle Atlantic Nivo 9/16 3 Drop Charcoal Gray - AUNV223DG2CHG

Middle Atlantic AUNV223DG2CHG Nivo Acoustic Ceiling Tile, 9/16" Lay-In, 3" Drop, Charcoal Gray

Overview

The Middle Atlantic AUNV223DG2CHG is a 2'×2' acoustic ceiling tile engineered for commercial AV and technology environments where clean, professional aesthetics matter as much as acoustic performance. Part of the Middle Atlantic Nivo acoustic ceiling tile line, this tile installs into standard 9/16" lay-in grid systems — the T-bar configuration found in the overwhelming majority of commercial office, conference room, and integration rack-room ceilings — with no special hardware required.

The 3" drop profile creates a recessed, shadow-line appearance that distinguishes technology-forward rooms from standard dropped-ceiling spaces. If you're finishing a room with rack gear, displays, or control systems and the ceiling looks like an afterthought, the AUNV223DG2CHG is a direct answer to that problem. The charcoal gray color works with dark trim palettes and blends naturally in spaces where projectors, mounts, and cable pathways are already part of the visual language.

Key Features

• 9/16" Lay-In Mounting Method: Drops directly into the most common commercial T-bar grid profile without tools or modification. If your existing ceiling grid is 9/16" wide-face, this tile slots in — no adapters, no cutting, no contractor callbacks. Confirm your grid profile before ordering; 15/16" grids require a different tile variant.
• 3" Drop Profile: The 3-inch recess creates visual depth and a deliberate shadow line at the grid. In conference rooms and boardrooms, this reads as intentional architectural detailing rather than commodity ceiling tile — useful when the rest of the room has been spec'd carefully.
• 2'×2' Format: The 60.33×60.33 cm footprint is the dominant commercial ceiling module. Replacement and integration into existing grid layouts is straightforward, and cutting to fit partial bays follows the same process as any standard 2×2 tile.
• PET Felt Construction (100% Polyester): PET felt is a preferred material in commercial AV spaces for two reasons: it contributes to mid- and high-frequency sound absorption, which reduces echo and flutter in rooms with hard surfaces, and it presents a textile face that reads warmer than mineral fiber or fiberglass alternatives. The 100% polyester composition also supports sustainability targets in projects pursuing green building criteria.
• Charcoal Gray Finish: A neutral dark tone that coordinates with rack systems, cable management, and AV infrastructure without competing visually. Charcoal reads as intentional in dark-mode conference rooms and control suites rather than the default off-white of standard acoustic tile.
• Low-Profile 2"×2" Body Dimensions: The tile body measures 2" high × 2" wide at the grid interface, keeping the plenum intrusion minimal. In ceilings with limited plenum depth — common in retrofitted or older commercial buildings — this matters for fitting alongside conduit, cable trays, and ductwork.

Integration & Compatibility

The AUNV223DG2CHG is designed specifically for ceiling grid systems using the 9/16" exposed T-bar lay-in configuration. This is the standard in most Class A and Class B commercial office construction built or renovated since the 1980s. Verify your grid face width before specifying — the two common profiles are 9/16" and 15/16", and they are not interchangeable.

This tile pairs naturally with Middle Atlantic's rack and AV furniture systems in environments where ceiling integration is part of the overall room design. For spaces requiring AV ceiling integration alongside structured cabling, projector drops, or in-ceiling speaker cutouts, the Nivo tile's PET felt face can be cut cleanly with a utility knife or jab saw. Plan speaker and device cutout locations before installation — repositioning after grid load is set takes more time.

The charcoal gray finish is consistent across the Nivo line, so mixing tiles of different drop profiles within the same ceiling grid maintains a unified appearance. If your project includes a mix of flat and drop-profile zones, confirm color lot consistency when ordering in quantity.

Frequently Asked Questions

Q: What ceiling grid type does the AUNV223DG2CHG fit?

A: The AUNV223DG2CHG is designed for standard 9/16" lay-in T-bar ceiling grids. It is not compatible with 15/16" exposed grid systems without modification. Verify your grid face width before ordering.

Q: What are the tile's actual dimensions?

A: The tile covers a 2'×2' (60.33×60.33 cm) ceiling module. The tile body itself measures 2" high × 2" wide at the grid interface, with a 3" drop profile creating the recessed face depth.

Q: What material is the AUNV223DG2CHG made from?

A: The tile is constructed from PET felt, which is 100% polyester. This material provides mid- and high-frequency sound absorption and presents a textile surface finish in charcoal gray.

Q: Can I cut this tile for speaker or device cutouts?

A: PET felt can be cut with a utility knife or jab saw. Plan and mark cutout locations before the tile is installed in the grid. Cuts should be made from the face side for cleanest edges.

Q: Is the AUNV223DG2CHG sold individually or in a pack?

A: Package contents are not specified in the available product documentation. Contact the seller to confirm pack quantity before placing a large-quantity order.

Q: Does this tile work with Middle Atlantic rack and furniture systems?

A: The Nivo tile is part of Middle Atlantic's acoustic ceiling tile system and is designed to integrate with their AV room and rack furniture ecosystem. Specific rack or furniture pairing compatibility should be verified against your Middle Atlantic room design documentation.

Ted Perry

The AUNV223DG2CHG comes up whenever I'm speccing the ceiling finish for a conference room or control suite that already has Middle Atlantic rack gear in it — the 3" drop profile on a 9/16" lay-in grid is a detail that separates a finished room from one that just has equipment in it. Small thing, visible every day.

Technical Highlights:

• 9/16" Lay-In Grid Fit: No adapters, no modification — this drops straight into the dominant commercial T-bar grid standard. The constraint is real: confirm grid face width is 9/16" before you put this on a purchase order.
• PET Felt (100% Polyester): Softer high-frequency absorption than mineral fiber, and the textile face reads differently in a client-facing room. In a hard-surfaced conference room with glass walls, this matters for both acoustics and aesthetics.
• 3" Drop, 2"×2" Body: The 3-inch recess creates shadow-line depth without eating into plenum space — the body profile at the grid is only 2"×2", which leaves room for cable trays and conduit in tighter plenum conditions.

Deployment Considerations:

• The 9/16" mounting requirement is non-negotiable — measure your grid before spec'ing. A mix of 9/16" and 15/16" grids on the same job site is more common than people expect in retrofitted buildings.
• Cut speaker or device holes before the tile goes into the grid. PET felt cuts cleanly but repositioning after the ceiling is loaded takes time; plan the layout on paper first.

The AUNV223DG2CHG is the right call for conference rooms, boardrooms, and control suites where the ceiling needs to match the quality level of the AV infrastructure below it — specifically in 9/16" grid buildings where you want the drop-profile finish without a custom fabrication budget.