Panduit T024X000FJM-BK PXE Continuous Tape Label Cassette

Overview

The Panduit T024X000FJM-BK is a PXE™ continuous tape cassette designed as a drop-in replacement media supply for Panduit's MP-series portable label printers. Each cassette contains polyolefin tape — 0.24 inches wide by 23 feet long (6.1 mm x 7 m) — loaded with black ink on white backing, ready to produce durable identification labels for cable management, panel marking, and field identification tasks. The cassette format integrates label material and ink ribbon into a single snap-in unit, so swapping media mid-job takes seconds rather than minutes. T024X000FJM-BK (often searched as T024X000FJM BK) is sold in a pack of 5 cassettes, with a carton quantity of 120 units for stocking integrators and field service teams.

Key Features

• Polyolefin Material: Polyolefin tape resists moisture, abrasion, and common chemical exposure better than paper alternatives — a practical requirement for labels that live on cable bundles in mechanical rooms, plenum spaces, or outdoor-rated enclosures where paper degrades quickly.
• 0.24" x 23 ft (6.1 mm x 7 m) Per Cassette: At 23 feet per cassette, a single T024X000FJM-BK roll yields a meaningful run of labels before a swap is needed. For a typical patch panel labeling job, one cassette can cover an entire rack's worth of cable IDs without interruption.
• Black on White Print: High-contrast black-on-white output remains readable at a glance in low-light equipment rooms and doesn't require UV light or special equipment to scan — important when a technician needs to trace a cable under load.
• Snap-In Cassette Design: The combined media-and-ribbon cassette eliminates the separate ribbon threading required by older printer formats. Fewer steps per reload means less downtime during large labeling runs on the job site.
• Compatible with MP75, MP100, MP200, MP300: Verified by Panduit to work across all four current MP-series portable printers, so purchasing a single media SKU covers mixed printer fleets — useful for teams that have upgraded units alongside older hardware.
• RoHS Compliant: Meets the EU Restriction of Hazardous Substances directive, a prerequisite for installations in facilities with environmental compliance requirements or projects with green building certifications.
• 5-Pack Configuration: The T024X000FJM-BK ships in packs of 5, keeping per-unit cost in line for ongoing stocking without requiring full-carton (120-unit) commitments.

Integration & Compatibility

This cassette is verified for use with the Panduit MP75, MP100, MP200, and MP300 portable label printers. If you are running a different Panduit printer model or require a different tape width or color, confirm cassette compatibility against the printer's accepted media list before ordering. Competitor part equivalents include T019X000FJC-BK and T024X000FJC-BK for cross-reference purposes. For broader label and identification supplies, verify that the cassette width matches your printer's supported range — the MP-series accepts a defined set of widths and substituting an unsupported width will cause feed errors.

What's in the Box

• 5x PXE™ T024X000FJM-BK continuous tape cassettes (polyolefin, black on white, 0.24" x 23 ft each)

Frequently Asked Questions

Q: Which printers is the T024X000FJM-BK compatible with?

A: The T024X000FJM-BK is verified for use with the Panduit MP75, MP100, MP200, and MP300 portable label printers.

Q: How much tape is in each cassette?

A: Each cassette contains 0.24 inches (6.1 mm) wide polyolefin tape, 23 feet (7 meters) long, with black ink on white backing.

Q: How many cassettes come in a package?

A: The T024X000FJM-BK is sold in a pack of 5 cassettes. The full carton quantity is 120 units.

Q: Is the T024X000FJM-BK RoHS compliant?

A: Yes, this cassette meets the RoHS directive requirements as indicated by Panduit's product documentation.

Q: What material is the tape made from?

A: The tape substrate is polyolefin, which provides better resistance to moisture, abrasion, and chemicals than standard paper label stock.

Q: Are there compatible cross-reference part numbers for the T024X000FJM-BK?

A: Panduit lists T019X000FJC-BK and T024X000FJC-BK as competitor cross-reference part numbers for this cassette.

Marty Allison

The T024X000FJM-BK is the cassette I keep stocked when running structured cabling or security system installs with MP-series Panduit printers. The 23-foot polyolefin roll per cassette is enough to label an entire rack's cable plant in one go — and with five cassettes per pack, a two-day job site run rarely runs out mid-task.

Technical Highlights:

• Polyolefin Substrate: Unlike paper tape, polyolefin holds up against moisture and abrasion in mechanical rooms, plenum cable trays, and outdoor conduit entry points — places where a paper label fails within months.
• 0.24" Width (6.1 mm): The narrow width is well-suited for wrap-around cable flagging and small terminal marking on patch panels where wider tape would overlap or obscure adjacent ports.
• 5-Pack (120/carton) Format: Stocking in 5-packs lets field teams carry the right quantity per job without over-ordering — and the 120-unit carton count makes per-unit cost predictable for project estimating.

Deployment Considerations:

• Confirm your MP-series printer model before ordering — the T024X000FJM-BK is validated for MP75, MP100, MP200, and MP300 only; other MP variants may require a different cassette SKU.
• At 0.24 inches wide, this tape is not suited for large surface area labels such as equipment nameplates or panel legends — those applications call for a wider cassette from the same PXE™ family.

This cassette is the right choice for security integrators and IT installers running MP-series printers on structured cabling and access control panel labeling projects where durable, moisture-resistant identification is a job site requirement.