Panduit CBX1BL-A Mini-Com™ Single-Port Surface Mount Box

The Panduit CBX1BL-A is a low-profile, single-port surface mount enclosure engineered for Mini-Com™ modular jack installations in commercial structured cabling systems. Measuring 1.89" × 1.03" × 0.92" (48 × 26.3 × 23.2 mm), this ABS housing provides a code-compliant termination point for copper network drops, A/V connections, and access control cabling where in-wall boxes aren't viable. UL 2043 plenum rating clears it for use in return-air pathways above drop ceilings — critical for datacenter perimeter jacks, hospital nurse stations, and open-office hoteling ports. Dual-mount design accepts #6 screws through integrated flanges or pressure-sensitive adhesive tape (tape sold separately), giving you flexibility on painted drywall, metal furniture panels, or modular-wall systems where penetration isn't permitted. Front label area accommodates handwritten or printed identification tags for jack numbering and VLAN assignment during punchdown. Black finish blends with commercial AV gear and dark-finish furniture. Carton quantity is 10 units; this SKU ships as a single box.

Key Features

• Single Mini-Com module capacity — accepts any Panduit Mini-Com insert (RJ45, RJ11, fiber, A/V, blank)
• Low-profile 0.92" height keeps box tight to wall, reducing snag risk in high-traffic areas
• UL 2043 plenum rating for installation in air-handling spaces without additional enclosures
• Screw-mount or adhesive-mount options — no drywall anchors required for non-load-bearing applications
• Molded ABS construction resists impact and UV degradation in perimeter daylight zones
• Front label recess for asset tagging and port numbering during MAC (move/add/change) cycles
• RoHS compliant for projects with environmental procurement mandates

UL 1863 listing certifies the box as a communication circuit accessory, meaning it's rated for low-voltage telecom wiring under NEC Article 800. UL 2043 plenum certification is the differentiator here: non-plenum boxes generate toxic smoke and must be enclosed in metal backboxes when installed above a drop ceiling that serves as a return-air plenum. This box's flame-retardant ABS formulation eliminates that extra step, saving material cost and install time on office retrofits where every jack lands on a cubicle spine or column wrap. The 1.89" width accommodates a single Mini-Com module with snap-in retention — no screws needed to secure the insert, so swapping a Cat6 jack for a fiber coupler or blanking plate is a 10-second operation during tenant turnover. Mounting holes are spaced for standard #6 fasteners; the rear cavity provides 0.5" of cable bend radius, meeting TIA-568 minimum for Category 6A solid-conductor cable without kinking the pairs. Adhesive-mount capability (using Panduit CBND-X tape or equivalent 3M VHB) is a time-saver on metal or glass surfaces where drilling isn't allowed — common in lease spaces, museum exhibits, or hospital infection-control zones. The tape bond is permanent, so surface prep (isopropyl alcohol wipe) and 24-hour cure time are mandatory for load-bearing reliability.

Deploy this box in scenarios where surface-mount convenience trumps aesthetic concealment: warehouse office mezzanines, retail POS counters (pairing the box with a shielded RJ45 insert for payment-terminal homeruns), conference-room credenzas (A/V plate with HDMI and USB pass-throughs using Mini-Com format inserts), or hospital headwall channels where infection-control protocols prohibit recessed boxes that trap dust. Integrators running structured cabling in historical buildings often use these boxes to avoid cutting into brick or plaster — the plenum rating means you can snake cable through existing ceiling voids without re-rating the space. The 10-pack carton quantity is sized for small projects; order 10 cartons (SKU CBX1BL-C, sold separately in some regions) for whole-floor rollouts. Pair with Panduit CJ688TGBL (Cat6A jack, black), CJ5E88TGBL (Cat5e), or CMFJBL (LC duplex fiber coupler) to match your backbone architecture. Competitive cross-reference: this box replaces Leviton 41089-1**, Hubbell ISMBK1, and Ortronics SJB-1 single-gang surface boxes in Mini-Com-based systems, though insert compatibility is Panduit-proprietary. The Sub-Brand designation Pan-Net™ identifies this as part of Panduit's copper infrastructure line, distinct from their Opti-Core fiber or NetKey systems.

RoHS compliance and UL dual-listing clear procurement gates for federal GSA Schedule projects, healthcare systems with LEED documentation requirements, and California Title 24 deployments. The black colorway is the only stocked option for this MPN; white (CBX1-AY) and electric ivory (CBX1EI-A) exist as separate SKUs if you're matching wall plates on painted surfaces. This box does not include a faceplate — the Mini-Com module's faceplate is integral to the insert, so once snapped in, the installation is complete with no additional trim ring. For multi-port runs, step up to the CBX2 (2-port) or CBX4 (4-port) boxes in the same series, though plenum rating applies across the line.