NETGEAR XCM89P-10000S M6100 Series PoE+ Daughter Card

Overview

The XCM89P-10000S is a PoE+ daughter card for the NETGEAR M6100 modular switch platform. It extends power delivery capacity to support IP camera deployments that require PoE+ (802.3at) across multiple ports. Install this card into an available expansion slot on a compatible M6100 chassis to add PoE+ power injection alongside data connectivity—eliminating the need for separate PoE+ injectors or external power supplies at the edge.

Compatibility

This daughter card is designed for NETGEAR M6100 Series modular switches. Verify your M6100 chassis model number and available expansion slots before ordering—slot availability and power budget constraints vary by configuration. Consult your M6100 platform documentation to confirm slot compatibility and maximum power delivery limits when running multiple PoE+ cards simultaneously.

Installation Notes

Install the card into an available expansion slot on the M6100 chassis. Ensure the chassis is powered down before insertion. Seating must be firm—a partial insertion will not establish power or data connectivity. After installation, power up the switch and verify port lights indicate active connectivity. Check the M6100 management interface to confirm the daughter card is recognized and ports are online before connecting cameras. Confirm total system power consumption does not exceed the chassis power supply rating.