Lifesafety Power FPO75-2D8E1 75W 16-Output Power Supply

Overview

The FPO75-2D8E1 is a 75W auxiliary power supply designed to distribute regulated DC power across multiple power supply branches in networked security installations. It outputs either 6A at 12VDC or 3A at 24VDC, with 16 dedicated outputs—each independently fused at 3A and selectable for Bus1 or Bus2 routing. This dual-bus architecture eliminates single points of failure in distributed systems where IP cameras, access control readers, or auxiliary devices require redundant or isolated power paths. The compact E1 enclosure (14H × 12W × 4.5D inches) fits standard DIN rail or wall-mount installations in telecom and security cabinets.

Compatibility

The FPO75-2D8E1 integrates into Lifesafety Power system architectures and pairs with installations requiring modular, fused power distribution to supervised endpoints. Each output's 3A fuse rating matches typical auxiliary loads (door locks, readers, sensors, low-power cameras). Bus-selectable outputs allow you to separate circuits by zone or backup domain—useful when designing PoE switch backup supplies or multi-zone access control trees where branch isolation prevents cascading outages.

Installation Notes

Output selection (Bus1 or Bus2) is configured per-terminal during commissioning. Ensure total connected load on a single output does not exceed 3A; over-current protection is integral to each channel. Mounting surface must support the enclosure's weight. Input power and output circuits require proper strain relief and labeling per NEC guidelines for DC auxiliary systems.