Lifesafety Power FPO150-B150D8M8NLCE2S 150W Power Supply

Overview

The Lifesafety Power FPO150-B150D8M8NLCE2S is a 150W industrial power supply rated for 12A/12V or 6A/24V operation. It integrates 8 independently fused DC auxiliary outputs—each rated at 3A and selectable for Bus1 or Bus2 connectivity—making it suitable for distributed access control, alarm, and surveillance installations where multiple field devices require isolated, protected power feeds from a single enclosure. The 8-output managed distribution module design lets you assign each branch to separate control buses, isolating faults and preventing a single device failure from cascading across the entire system.

Compatibility

This supply is designed for Lifesafety Power systems and access control architectures that use Bus1 and Bus2 distribution topology. Verify compatibility with your specific control panel or power distribution module before ordering—output voltage and bus assignment must match your system's input specifications. The 3A per-output fusing and Bus1/Bus2 selectability indicate this unit is intended for modular, multi-zone access control and alarm networks rather than single-device PoE delivery.

Installation Notes

Each of the 8 outputs is fused independently at 3A, so total system load is limited by the 150W budget and individual output fusing—never exceed 3A on any single output or 12.5A aggregate across all outputs at 12V. Confirm output voltage (12V or 24V) matches your connected devices before energizing. Bus1 and Bus2 assignment is per-output and selectable, so plan your zone/device distribution across the two buses to balance load and isolate critical circuits. Ensure adequate ventilation around the supply enclosure, particularly if operating near the 150W maximum in a warm environment.