Lifesafety Power FPO150-B100C4D8E4M1 Supervised Power Supply
Overview
The FPO150-B100C4D8E4M1 is a 150W supervised power supply designed for small to mid-scale security installations where reliable power distribution and tamper detection matter. Supervision capability enables alarm notification if power loss, wiring faults, or enclosure breaches occur — critical in unmanned or high-value deployments. This model integrates into power supplies and UPS systems where battery backup is required to maintain uptime during mains failure.
Compatibility
The FPO150-B100C4D8E4M1 is part of the Lifesafety Power FPO-series platform, designed to support wired and networked security devices requiring stable 12VDC or 24VDC output. Confirm your load voltage and current requirements before selection — mismatched voltage will damage downstream equipment. If your installation includes IP security cameras or access control readers, verify that each device's amperage does not exceed the total supply capacity.
Installation Notes
Mount the supply in a secure, dry enclosure away from moisture and extreme temperature swings. Ensure all output circuits are properly fused and grounded per local electrical code. Battery backup (if installed) requires periodic testing and replacement per the battery manufacturer's schedule — typically every 3–5 years for lead-acid units. Connect supervision wiring separately from power rails to avoid false alarms on transient load spikes. Consult the power backup and UPS planning guide if you are sizing battery runtime for your application.
