Lifesafety Power FPO150/250-2C8P2D8PE8H1 Access Control Power Supply

Overview

The FPO150/250-2C8P2D8PE8H1 is a 400W commercial power supply housed in an E8H1 enclosure, sized for mid-scale access control and building security systems. It delivers 12V and 24V outputs to support up to 16 doors on Honeywell platforms — a standard configuration for office buildings, data centers, and multi-tenant facilities where door locks, electric strikes, and readers need redundant, regulated power.

Compatibility

Designed for Honeywell security control panels and proprietary Honeywell lock/reader ecosystems. Verify your control panel model accepts dual-voltage sourcing (12V + 24V) before deployment. The 16-door capacity assumes standard Honeywell reader and strike configurations; heavier draws (electromagnetic locks, high-current solenoids) may reduce door count. Not compatible with generic ONVIF IP intercom or camera power — this is a dedicated access control supply.

Installation Notes

Enclosure dimensions are 36H × 30W × 4.5D inches — plan wall-mount or rack space accordingly. Confirm 120V or 240V input availability at the control panel location before ordering. The supply's 400W maximum handles typical Honeywell lock/reader loads but does not support additional surveillance camera power or emergency lighting circuits. Wire 12V and 24V circuits separately to avoid crosstalk on signal-sensitive readers.

What's in the Box

• 1x FPO150/250-2C8P2D8PE8H1 power supply enclosure assembly
• Mounting hardware (bracket, fasteners)
• Terminal blocks for 12V and 24V circuit termination